Hey Richard, I think there are two separate issues here. Lot of people looking at Fusion aren't choosing it for technology, they are choosing it for media, as 1GE L3 ports are not available. So options are
a) L2 aggregation b) Fusion c) Wait for JNPR to release some MX244 with 4xQSFP28 + 40xSFP+ box, which has attractive pay-as-you-go for 1GE deployments. I'm sure there is another set of problems where EVPN and Fusion are competition options, but for service providers fusion's value proposal mainly is low rate ports, ports which Cisco and Juniper do not really offer anymore on L3 devices. On Tue, 6 Nov 2018 at 19:21, Richard McGovern <rmcgov...@juniper.net> wrote: > > I might suggest you look at an EVPN based design instead. This is going to > be Juniper's #1 go to in the future. I believe things like Junos Fusion and > MC-LAG, etc. may still be supported, but secondary to EVPN and associated > features. > > What is your planned SD devices? QFX5??? > > Richard McGovern > Sr Sales Engineer, Juniper Networks > 978-618-3342 > > > On 11/5/18, 8:32 PM, "Eldon Koyle" <ekoyle+puck.nether....@gmail.com> wrote: > > What kind of experiences (good or bad) have people had with Juniper's > Fusion Provider edge? Are there any limitations I should be aware of? > > I'm looking at it to simplify management in a campus network environment > and to use features that are only available on the MX currently. > > -- > Eldon > -- > I don't think the universe wants me to send this message > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp -- ++ytti _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
