I think the commands to check on the dhcp client are show dhcp client binding and show dhcp client statistics.
There are a lot of bugs in -D70. -- Eldon On Mon, Dec 10, 2018 at 8:42 AM Mohammad Khalil <eng.m...@gmail.com> wrote: > I cannot do the upgrade right now as I have to do the setup so quickly > What features should I enable ? > > On Mon, 10 Dec 2018 at 17:40, Eldon Koyle < > ekoyle+puck.nether....@gmail.com> wrote: > >> The firmware that ships on the SRX is missing a lot of features. I would >> recommend upgrading to the latest version in that code train, which is >> 15.1X49-D150. >> >> -- >> Eldon >> >> On Mon, Dec 10, 2018 at 1:00 AM Mohammad Khalil <eng.m...@gmail.com> >> wrote: >> >>> Hello all >>> I have an old SRX which I configured it is WAN IP address using the below >>> command: >>> set interfaces ge-0/0/0 unit 0 family inet address dhcp >>> >>> Now , I have replaced the box with a newer one (srx300 15.1X49-D70.3) >>> but I >>> cannot find the command itself >>> I have tried the below: >>> set interfaces ge-0/0/0 unit 0 family inet dhcp-client >>> With no luck ! >>> When I try to check : >>> show system services ? (no DHCP option is available) >>> I have configured: >>> set security zones security-zone untrust interfaces ge-0/0/0.0 >>> host-inbound-services dhcp >>> >>> Any ideas guys? >>> >>> BR, >>> Mohammad >>> _______________________________________________ >>> juniper-nsp mailing list juniper-nsp@puck.nether.net >>> https://puck.nether.net/mailman/listinfo/juniper-nsp >>> >> _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp