Sorry I don't have mc-lag configs for vMX, but I did do mc-lag on vQFX... Here is some quick outputs from my eve-ng lab...
I have mc-lag between (2) vQFX devices... and actually, the lag client side is one vMX node... Here's one side of the mc-lag pair... I grabbed some commands that I recall being important to make this work... forgive me, it's been a while... lemme know if you need anything else from this... {master:0} root@stlr-qfx-01> show configuration interfaces ae1 | display set set interfaces ae1 mtu 9216 set interfaces ae1 aggregated-ether-options lacp active set interfaces ae1 aggregated-ether-options lacp system-id 00:01:02:03:04:05 set interfaces ae1 aggregated-ether-options lacp admin-key 3 set interfaces ae1 aggregated-ether-options mc-ae mc-ae-id 3 set interfaces ae1 aggregated-ether-options mc-ae redundancy-group 1 set interfaces ae1 aggregated-ether-options mc-ae chassis-id 0 set interfaces ae1 aggregated-ether-options mc-ae mode active-active set interfaces ae1 aggregated-ether-options mc-ae status-control active set interfaces ae1 aggregated-ether-options mc-ae init-delay-time 240 set interfaces ae1 unit 0 family ethernet-switching interface-mode trunk set interfaces ae1 unit 0 family ethernet-switching vlan members ten set multi-chassis multi-chassis-protection 1.1.1.15 interface ae0 set protocols iccp local-ip-addr 1.1.1.5 set protocols iccp peer 1.1.1.15 session-establishment-hold-time 50 set protocols iccp peer 1.1.1.15 redundancy-group-id-list 1 set protocols iccp peer 1.1.1.15 backup-liveness-detection backup-peer-ip 10.207.64.233 set protocols iccp peer 1.1.1.15 liveness-detection minimum-receive-interval 60 set protocols iccp peer 1.1.1.15 liveness-detection transmit-interval minimum-interval 60 set protocols rstp bpdu-block-on-edge set switch-options service-id 1 {master:0} root@stlr-qfx-01> show interfaces mc-ae Member Link : ae1 Current State Machine's State: mcae active state Local Status : active Local State : up Peer Status : active Peer State : up Logical Interface : ae1.0 Topology Type : bridge Local State : up Peer State : up Peer Ip/MCP/State : 1.1.1.15 ae0.0 up {master:0} root@stlr-qfx-01> show iccp Redundancy Group Information for peer 1.1.1.15 TCP Connection : Established Liveliness Detection : Up Backup liveness peer status: Up Redundancy Group ID Status 1 Up Client Application: lacpd Redundancy Group IDs Joined: 1 Client Application: MCSNOOPD Redundancy Group IDs Joined: None Client Application: l2ald_iccpd_client Redundancy Group IDs Joined: 1 {master:0} root@stlr-qfx-01> -Aaron _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp