That is a fusion satellite device software version for an 18.x release. -- Eldon
On Tue, Jul 2, 2019, 14:05 Colton Conor <colton.co...@gmail.com> wrote: > Do you know when this will be fixed in the mainline releases? I have no > clue what 3.5R1-S4.1 is? > > On Fri, Jun 28, 2019 at 2:22 PM Timothy Creswick <timo...@creswick.eu> > wrote: > > > For anyone interested in this, JTAC released to us 3.5R1-S4.1 for the > > satellite devices (I don't believe this will be generally available until > > tomorrow). This addresses the issue and confirms that there were 2 or 3 > > different PRs relating to the Broadcom chipset being incorrectly > programmed > > by Junos. > > > > Some output, testing with a variety of 1Gbps optics (coded SX, LX, > uncoded > > BX, LX and SX). > > > > > show chassis hardware satellite > > Hardware inventory: > > Item Version Part number Serial number Description > > FPC 100 REV 27 650-061152 WS37183----X QFX5110-48S-4C > > PIC 0 REV 27 650-061152 WS37183----X 48x10G-4x100G > > Xcvr 0 850nm 740-011782 F----------X SFP-SX > > Xcvr 2 1310nm 740-011783 F----------X SFP-LX10 > > Xcvr 4 NON-JNPR VS51208----X > > SFP-1000BASE-BX10-D > > Xcvr 6 NON-JNPR VS60930----X SFP-LX10 > > Xcvr 8 NON-JNPR VS50930----X SFP-SX > > > > > show interfaces ge-100/0/[02468] terse > > Interface Admin Link Proto Local Remote > > ge-100/0/0 up up > > ge-100/0/2 up up > > ge-100/0/4 up up > > ge-100/0/6 up up > > ge-100/0/8 up up > > > > > show configuration interfaces > > ge-100/0/0 { > > unit 0; > > } > > ge-100/0/2 { > > unit 0; > > } > > ge-100/0/4 { > > unit 0; > > } > > ge-100/0/6 { > > unit 0; > > } > > ge-100/0/8 { > > unit 0; > > } > > > > # bcmshell ps 1,3,5,7,9 > > > > HW (unit 0) > > ena/ speed/ link auto STP lrn > > inter max loop > > port link duplex scan neg? state pause discrd ops > > face frame back > > ge0( 1) up 1G FD HW Yes Forward None F > > GMII 1518 > > ge1( 3) up 1G FD HW Yes Forward None F > > GMII 1518 > > ge2( 5) up 1G FD HW Yes Forward None F > > GMII 1518 > > ge3( 7) up 1G FD HW Yes Forward None F > > GMII 1518 > > ge4( 9) up 1G FD HW Yes Forward None F > > GMII 1518 > > > > We note that now changing the auto-negotiate state in Junos correctly > > updates the underlying chipset and link negotiation works correctly. > > Interface is shown as GMII which we understand to be correct also. > > > > All-in, pretty terrible that - as far as we can tell - 1Gbps ports have > > *never worked* on QFX5110 properly in all the four basic combinations > (i.e. > > SX and LX at both auto- and no-auto negotiation) until this release. > Quite > > how Juniper have been shipping the hardware for so long in that state is > a > > mystery to me. > > > > > > Tim > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp