Hi, We do that with RE-S-1300 and DPCE 4x 10GE R sort of cards. No problems for a 4 or more years. And IPv6 full tables too.
Best regards, Misak Khachatryan, Network Administration and Monitoring Department Manager, GNC- ALFA CJSC 1 Khaghaghutyan str., Abovyan, 2201 Armenia Tel: +374 60 46 99 70 (9670), Mob.: +374 55 19 98 40 URL: www.rtarmenia.am<http://www.rtarmenia.am> On Fri, Nov 1, 2019 at 8:50 PM Dario Amaya <darioamay...@gmail.com<mailto:darioamay...@gmail.com>> wrote: Hello We have the following hardware and we are looking to use this chassis as an edge router, terminating 2x full table IP transit and some IXP peering. MX480 2x RE-S-2000-4096-S 2x SCB-MX960-S 1x MPC-3D-16XGE-SFPP 1x DPCE-R-20GE-2XGE Is anybody here running these routing-engines in a similar role? How is the CPU on them / convergence times? Hopefully not as bad as an MX80... Also - I know the RE's are EOL, but does anybody know if they will run JUNOS later than 16.2? Kind regards _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net<mailto:juniper-nsp@puck.nether.net> https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp