On Tue, 12 Nov 2019 at 12:34, Mark Tinka <mark.ti...@seacom.mu> wrote:
> On our MX480's, we've known for a very long time that IPv4 BFD is > supported in the PFE. However, IPv6 BFD runs on the RE. PFE is an ambiguous term, it variably means NPU or LC CPU inside JNPR. There are several places where you can run your keepalieve a) RPD b) RE PPMd c) LC CPU PPMd d) NPU (dispatch block in the LU/XL) And it depends on config where you run it. Not every protocol can register to all of these. But yes, BFD v4 can run as RE PPMd, LC CPU PPMd and NPU. -- ++ytti _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
