--- Begin Message ---
Chuck is not running Fusion of any kind.
Chuck, I "think" we are going to eventually certify (not re-sell) one of these
adapters, most likely Mellanox. We cannot certify all, that is for sure.
Hopefully at that time, we can add whatever might be needed to get DOM support,
if possible.
Regards and FYI, Rich
Richard McGovern
Sr Sales Engineer, Juniper Networks
978-618-3342
I’d rather be lucky than good, as I know I am not good
I don’t make the news, I just report it
On 3/16/20, 5:15 PM, "Jackson, William" <william.jack...@gibtele.com> wrote:
Yes
We have used the ones from flexoptix
They tend to work correctly, but like you mentioned you lose the DOM and
also the optic partcode may not display correctly on a show chassis hardware.
Apart from that work quite well.
Note: don't bother trying to use these for a fusion setup on the satellite
side as it doesn't work.
They can work on the AD device with a native 10GE port on the satellite,
but using them on the satellite in a 40/100GE port as a 10GE uplink, is a no
go.
will
-----Original Message-----
From: juniper-nsp <juniper-nsp-boun...@puck.nether.net> On Behalf Of Chuck
Anderson
Sent: 16 March 2020 21:06
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] QSFP+ to SFP+ adapters
Has anyone tried using QSFP+ to SFP+ adapters such as this one? What
software versions have you tried?
https://www.fs.com/products/72587.html
I'm testing these on QFX10002-36Q with 17.3R3-S7.2 and SFP+ 10G-LR modules.
The links come up and pass LLDP and IP traffic, but DOM doesn't work:
{master:0}
root@spine-1> show interfaces diagnostics optics xe-0/0/30:0 Physical
interface: xe-0/0/30:0
Optical diagnostics : N/A
{master:0}
root@spine-1> show interfaces diagnostics optics xe-0/0/31:0 Physical
interface: xe-0/0/31:0
Optical diagnostics : N/A
{master:0}
root@spine-1> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
PIC 0 BUILTIN BUILTIN 36X40G
Xcvr 30 NON-JNPR UNKNOWN
Xcvr 31 NON-JNPR UNKNOWN
root@spine-1> show chassis pic fpc-slot 0 pic-slot 0
FPC slot 0, PIC slot 0 information:
Type 36X40G
State Online
PIC version 2.47
Uptime 26 days, 40 minutes, 44 seconds
PIC port information:
Fiber Xcvr vendor Wave-
Xcvr
Port Cable type type Xcvr vendor part number length
Firmware
30 unknown cable n/a n/a
0.0
31 unknown cable n/a n/a
0.0
{master:0}
root@spine-1> show interfaces terse xe-*
Interface Admin Link Proto Local Remote
xe-0/0/30:0 up up
xe-0/0/30:0.0 up up inet 10.0.0.1/30
xe-0/0/30:1 up down
xe-0/0/30:2 up down
xe-0/0/30:3 up down
xe-0/0/31:0 up up
xe-0/0/31:0.0 up up inet 10.0.0.5/30
xe-0/0/31:1 up down
xe-0/0/31:2 up down
xe-0/0/31:3 up down
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
--- End Message ---
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp