Hello, We have some older EX4200 switch stacks still in production using valuable public IPv4 /31's for their uplinks. We would like to renumber those uplinks to RFC1918 but the issue is that these then show up in traceroute/mtr towards anything routed behind the switches.
Is there a way to filter these icmp ttl expired messages so they don't show up when running mtr? Or is there a way on the EX4200 to set source address when generating these ttl expired messages? Even better would be a way to get a IPv4 default route via IPv6 BGP session ! _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp