Hello is it possible to use a QSA module and get DDM/DOM readings? Here's a Juniper QFX5100-48T with a QSA adapter. The 10G interface is up and it is forwarding packets, but there are no DOM/DDM readings:
root# run show interfaces terse xe-0/0/52* Interface Admin Link Proto Local Remote xe-0/0/52:0 up up xe-0/0/52:0.0 up up eth-switch xe-0/0/52:1 up down xe-0/0/52:2 up down xe-0/0/52:3 up down {master:0}[edit] root# run show interfaces diagnostics optics Physical interface: xe-0/0/52:0 Optical diagnostics : N/A Physical interface: xe-0/0/52:1 Optical diagnostics : N/A Physical interface: xe-0/0/52:2 Optical diagnostics : N/A Physical interface: xe-0/0/52:3 Optical diagnostics : N/A What is particularly irritating is that fs.com claims to have DOM support ("DOM Support Yes") but it doesn't seem to work: https://www.fs.com/de-en/products/72587.html?attribute=2699&id=221606 I tried QSAs from two different vendors but to no avail. I wonder if anyone has succeded in getting DDM/DOM readings on a QSA adapter. Is it the QFX5100-48T's fault or is it the QSA+SFP Modules that are at fault? Regards Karl _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp