hey,
I tried QSAs from two different vendors but to no avail. I wonder if
anyone has succeded in getting DDM/DOM readings on a QSA adapter. Is it
the QFX5100-48T's fault or is it the QSA+SFP Modules that are at fault?
Works fine on MX10k3 with 19.4R3-S1.3
tarko@x> show interfaces terse xe-0/0/3*
Interface Admin Link Proto Local Remote
xe-0/0/3:0 up up
xe-0/0/3:0.0 up up inet x/31
inet6 x/64
x/64
multiservice
xe-0/0/3:1 down down
xe-0/0/3:2 down down
xe-0/0/3:3 down down
tarko@x> show chassis hardware | match OPCPCH16140148
Xcvr 3 A01 A NON-JNPR OPCPCH16140148 SFP+-10G-ZR
tarko@x> show interfaces diagnostics optics xe-0/0/3:0
Physical interface: xe-0/0/3:0
Laser bias current : 70.504 mA
Laser output power : 1.5650 mW / 1.95 dBm
Module temperature : 28 degrees C / 82
degrees F
Module voltage : 3.3020 V
Laser receiver power : 0.1870 mW / -7.28 dBm
--
tarko
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
