On man., 20 dec. 2021, Dave Peters - Terabit Systems via juniper-nsp <juniper-nsp@puck.nether.net> wrote:
> I've got a JNP-SPC3 card running on an MX480 running 19.4R3.11, and I'm > seeing FPC minor errors (details below, along with log errors on a "failed > update"). Got an SCBE2 and have tried both the RE-S-X6-64G and the > RE-S-1800x4-16G routing engines. Can't seem to find any way to clear those > errors, or information on why they're occurring. > > > I've cleared the config and issued the command request system enable > unified-services, rebooted to have the cards come online. Edit: Looks like I > may have to update the vmhost-firmware file (bolded below), which juniper > seems to hide on their site. Hints? > > Anyone have these same issues? A few comments from here. I would suggest you go with the latest SR (19.4R3-S6) instead of 19.4R3 - also remember that you need to install the package for SPC3 seperately - it's available under downloads as "New Gen Services for 32 Bit-MX High-End Series" (yes, it's named 32-bit despite being used on 64-bit JunOS - I think the SPC3 runs a 32 bit Linux internally). You don't need to upgrade the vmhost-firmware - Jan _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
