I'm trying to add VRRP for IPv6 to a pair of MX150s (that are already running VRRP for IPv4). I've switched from VRRPv2 to VRRPv3, and the v4 VRRP switched over, but both routers think they are master for the v6 side. Looking at "show vrrp interface" on each router, the "Advertisement sent" count is increasing, but if I do a "monitor traffic", I only see the VRRP packets for the v4 IP.
Config I've set (from first router, second just has a different address and priority): interfaces { ae1 { unit 101 { vlan-id 101; family inet6 { address <block>::2/64 { vrrp-inet6-group 26 { virtual-inet6-address <block>::1; priority 110; no-preempt; accept-data; } } } } } } protocols { router-advertisement { interface ae1.101 { virtual-router-only; } } vrrp { version-3; } } -- Chris Adams <c...@cmadams.net> _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp