Looks like you are missing "virtual-link-local-address".
-Jonas
Am 2022-01-25 20:51, schrieb Chris Adams via juniper-nsp:
I'm trying to add VRRP for IPv6 to a pair of MX150s (that are already
running VRRP for IPv4). I've switched from VRRPv2 to VRRPv3, and the
v4
VRRP switched over, but both routers think they are master for the v6
side. Looking at "show vrrp interface" on each router, the
"Advertisement sent" count is increasing, but if I do a "monitor
traffic", I only see the VRRP packets for the v4 IP.
Config I've set (from first router, second just has a different address
and priority):
interfaces {
ae1 {
unit 101 {
vlan-id 101;
family inet6 {
address <block>::2/64 {
vrrp-inet6-group 26 {
virtual-inet6-address <block>::1;
priority 110;
no-preempt;
accept-data;
}
}
}
}
}
}
protocols {
router-advertisement {
interface ae1.101 {
virtual-router-only;
}
}
vrrp {
version-3;
}
}
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
