Hi everyone, I have multicast traffic through a P2MP LSP and when this traffic goes through an EX or QFX series switch (spot EX4600 and QFX5110/5120) it is lost. We use these switches as multilayer, they have MPLS suite protocols (ISIS, LDP and RSVP).
*>show versionModel: ex4600-40fJunos: 21.4R3.15 (recommended version at day)* The switch see the transit LSP from IP 2.2.2.2 to 1.1.1.1: *> show mpls lspTransit LSP: 2 sessionsTo From State Rt Style Labelin Labelout LSPname2.2.2.2 1.1.1.1 Up 0 1 SE 6 2 lsp1Total 2 displayed, Up 2, Down 0* Traffic from 1.1.1.1 come's via ae0: *> show route 1.1.1.11.1.1.1/32 <http://1.1.1.1/32> *[IS-IS/18] via ae0.01.1.1.1/32 <http://1.1.1.1/32> *[LDP/9] via ae0.0, Push 315471* Traffic to 2.2.2.2 goes via ae3: *> show route 2.2.2.22.2.2.2/32 <http://2.2.2.2/32> *[IS-IS/18] 20:36:26, via ae3.02.2.2.2/32 <http://2.2.2.2/32> *[LDP/9] 20:36:25, via ae3.0* The P2MP traffic see on input interface but they not replicate at the output: *Interface: ae0, Enabled, Link is UpInput bytes: 7282719382422 (785608168 bps) [207824323]Input packets: 5263502719 (70972 pps) [223103]Interface: ae3, Enabled, Link is Up Output bytes: 186620844 (26760 bps) [7545] Output packets: 1225967 (13 pps) [47]* Has anyone ever had a similar problem? or are you certain that this type of LSP will NOT work on these switches? Thanks, Gonzalo. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp