I tried to recreate the scenario in my lab with no success
21.2R3-S4.8 - in lab - problem not seen
20.2R3-S7.3 - in lab - problem not seen
19.2R3-S6.1 - in lab - problem not seen
18.3R3-S6.1 - in lab - problem not seen
17.4R2-S11 - in lab - problem not seen
17.4R2-S11 - in field - problem seen
again, the problem is, when i enabled this command...
set protocols igmp-snooping vlan vlan100 l2-querier source-address
10.100.4.1
...a customer riding an l2circuit on ge-0/0/2 report to me that their
multicast stops working... ospf goes down and stays in INIT...
when i remove all pim and igmp, then there OSPF neighbors up and stabilizes
i just don't know how running igmp inside vlan 100 with ports ge-0/0/4,
5 and 6 would have anything to do with an l2circuit on ge-0/0/2
-Aaron
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp