On 13/04/17 07:30, Mark Morgan Lloyd via Lazarus wrote:
On 12/04/17 21:30, Carlos E. R. via Lazarus wrote:> Hi,> I'm new on this list, so if I should post this to a different place,> just tell me.> I want to find a function that I can use on Linux to write a memory> block to an arbitrary position on a device, say, /dev/sda or /dev/sda5 .> I can do that on an opened file with seek() and write(), but apparently> only on files. I need accessing the raw disk device. So currently I call> 'dd' instead.> I also had problems with blockread/write: it failed reading more than> one megabyte. That's interesting, I need to look at some medium testing stuff over the next few days and was assuming I'd need to check the dd sources. Are you running as root to get direct access to the device?
In case this is useful to anybody at any point: I was filling a device with a pattern and then reading it back, and found that the read time depended crucially on the amount of RAM available (relative to the size of device I was testing). This turned out to be because I was relying on Reset() with FileMode = 2 to open the file R/W, but this was causing the Linux kernel to buffer as much as possible in RAM. Switching to using Rewrite(), then closing and reopening with Reset() only if needed, resulted in predictable performance.
So I think that the lesson is that Reset() should only be used for R/W files when the write and read operations are expected to be comparatively close to each other in time and position.
-- Mark Morgan Lloyd markMLl .AT. telemetry.co .DOT. uk [Opinions above are the author's, not those of his employers or colleagues] -- _______________________________________________ Lazarus mailing list Lazarus@lists.lazarus-ide.org http://lists.lazarus-ide.org/listinfo/lazarus
