On 1/10/19 7:15 AM, Nikolay Shirokovskiy wrote:
> Just set l2-cache-size to INT64_MAX for all format nodes of
> qcow2 type in block node graph.
>
> -drive configuration is not supported because we can not
> set l2 cache size down the backing chain in this case.
>
> Signed-off-by: Nikolay Shirokovskiy <nshirokovs...@virtuozzo.com>
> ---
> src/qemu/qemu_block.c | 5 ++++-
> src/qemu/qemu_command.c | 23 +++++++++++++++++++++++
> src/qemu/qemu_domain.c | 2 ++
> src/util/virstoragefile.c | 1 +
> src/util/virstoragefile.h | 1 +
> 5 files changed, 31 insertions(+), 1 deletion(-)
>
I guess I find it "strange" to have a driver argument be copied into
storage source, but I guess that just an "implementation detail" that I
have to live with.
> diff --git a/src/qemu/qemu_block.c b/src/qemu/qemu_block.c
> index cbf0aa4..5f98b85 100644
> --- a/src/qemu/qemu_block.c
> +++ b/src/qemu/qemu_block.c
> @@ -1322,7 +1322,6 @@
> qemuBlockStorageSourceGetFormatQcow2Props(virStorageSourcePtr src,
> * 'pass-discard-snapshot'
> * 'pass-discard-other'
> * 'overlap-check'
> - * 'l2-cache-size'
> * 'l2-cache-entry-size'
> * 'refcount-cache-size'
> * 'cache-clean-interval'
> @@ -1331,6 +1330,10 @@
> qemuBlockStorageSourceGetFormatQcow2Props(virStorageSourcePtr src,
> if (qemuBlockStorageSourceGetFormatQcowGenericProps(src, "qcow2", props)
> < 0)
> return -1;
>
> + if (src->metadata_cache_size ==
> VIR_DOMAIN_DISK_METADATA_CACHE_SIZE_MAXIMUM &&
> + virJSONValueObjectAdd(props, "I:l2-cache-size", INT64_MAX, NULL) < 0)
> + return -1;
> +
> return 0;
> }
>
> diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
> index 822d5f8..96d6601 100644
> --- a/src/qemu/qemu_command.c
> +++ b/src/qemu/qemu_command.c
> @@ -1328,6 +1328,20 @@ qemuCheckDiskConfig(virDomainDiskDefPtr disk,
> return -1;
> }
>
> + if (disk->metadata_cache_size) {
> + if (disk->src->format != VIR_STORAGE_FILE_QCOW2) {
> + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
> + _("metadata_cache_size can only be set for qcow2
> disks"));
> + return -1;
> + }
> +
> + if (disk->metadata_cache_size !=
> VIR_DOMAIN_DISK_METADATA_CACHE_SIZE_MAXIMUM) {
> + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
> + _("metadata_cache_size can only be set to
> 'maximum'"));
Since the only way to get here is if metadata_cache_size is set and the
only way it's set when it's VIR_DOMAIN_DISK_METADATA_CACHE_SIZE_MAXIMUM,
then I see this as unnecessary...
If you think the future holds more than "minimum" (0) and "maximum" (1),
then change the condition into here to be metadata_cache_size >
VIR_DOMAIN_DISK_METADATA_CACHE_SIZE_MINIMUM
Even with that I wouldn't bother with this check - leave that for a
future change.
> + return -1;
> + }
> + }
> +
> if (qemuCaps) {
> if (disk->serial &&
> disk->bus == VIR_DOMAIN_DISK_BUS_SCSI &&
> @@ -1351,6 +1365,15 @@ qemuCheckDiskConfig(virDomainDiskDefPtr disk,
> _("detect_zeroes is not supported by this QEMU
> binary"));
> return -1;
> }
> +
> + if (disk->metadata_cache_size &&
> + !(virQEMUCapsGet(qemuCaps, QEMU_CAPS_BLOCKDEV) &&
> + virQEMUCapsGet(qemuCaps,
> QEMU_CAPS_QCOW2_L2_CACHE_SIZE_CAPPED))) {
Even though l2-cache-size needs -blockdev (qemu 3.0+) support to add the
field is only qemu 3.1+, so using BLOCKDEV here just becomes a mechanism
to note what type of support requires BLOCKDEV.
IDC if the check stays - it's just superfluous then.
John
> + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
> + _("setting metadata_cache_size is not supported
> by "
> + "this QEMU binary"));
> + return -1;
> + }
> }
>
> if (disk->serial &&
> diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
> index ec6b340..fc5c7c2 100644
> --- a/src/qemu/qemu_domain.c
> +++ b/src/qemu/qemu_domain.c
> @@ -9202,6 +9202,7 @@ qemuDomainDiskChangeSupported(virDomainDiskDefPtr disk,
> /* "snapshot" is a libvirt internal field and thus can be changed */
> /* startupPolicy is allowed to be updated. Therefore not checked here. */
> CHECK_EQ(transient, "transient", true);
> + CHECK_EQ(metadata_cache_size, "metadata_cache_size", true);
>
> /* Note: For some address types the address auto generation for
> * @disk has still not happened at this point (e.g. driver
> @@ -13370,6 +13371,7 @@ qemuDomainPrepareDiskSourceData(virDomainDiskDefPtr
> disk,
> src->iomode = disk->iomode;
> src->cachemode = disk->cachemode;
> src->discard = disk->discard;
> + src->metadata_cache_size = disk->metadata_cache_size;
>
> if (disk->device == VIR_DOMAIN_DISK_DEVICE_FLOPPY)
> src->floppyimg = true;
> diff --git a/src/util/virstoragefile.c b/src/util/virstoragefile.c
> index bd4b027..e5660e6 100644
> --- a/src/util/virstoragefile.c
> +++ b/src/util/virstoragefile.c
> @@ -2208,6 +2208,7 @@ virStorageSourceCopy(const virStorageSource *src,
> ret->cachemode = src->cachemode;
> ret->discard = src->discard;
> ret->detect_zeroes = src->detect_zeroes;
> + ret->metadata_cache_size = src->metadata_cache_size;
>
> /* storage driver metadata are not copied */
> ret->drv = NULL;
> diff --git a/src/util/virstoragefile.h b/src/util/virstoragefile.h
> index 1d6161a..8bf5fe4 100644
> --- a/src/util/virstoragefile.h
> +++ b/src/util/virstoragefile.h
> @@ -329,6 +329,7 @@ struct _virStorageSource {
> int cachemode; /* enum virDomainDiskCache */
> int discard; /* enum virDomainDiskDiscard */
> int detect_zeroes; /* enum virDomainDiskDetectZeroes */
> + int metadata_cache_size; /* enum virDomainDiskImageMetadataCacheSize */
>
> bool floppyimg; /* set to true if the storage source is going to be used
> as a source for floppy drive */
>
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list