I think I have found the problem and it is not in the drivers. My current DVB-s card seems to send only about 30mv p-p of 22khz tone. My receiver monitored the same way sends about 80mv. I think the budget card may be malfunctioning. I am going to try and get another and perhaps repair this one. Thanks -Chris On Mon, Oct 07, 2002 at 01:28:03PM +0200, Holger Waechtler wrote: > Hi Chris, > > Chris Turbeville wrote: > >On Fri, Oct 04, 2002 at 12:37:56PM -0500, Chris Turbeville wrote: > > > >>Ok so I have now built the NEWSTRUCT drivers and hurrray: > >> > > > >Ok now I have gotten the video out of /dev/dvb/adapter0/dvr0 and remuxed > >my own mpegs. I feel so proud. My next challeng is this. I have a > >collection of single LO Ku band LNBs hook via 22khz/18/13v Multiswitches > >and a 4x1 disecq switch for each receiver (yes I am a masochist). > >I can tune AMC4 which sits on the non 22khz part of the multiswitch > >behind diseqc input A. However I cannot tune Telstar5 on the 22khz > >multiside. It seems the diseqc is mussing with the 22khz tone as I have > >by random diddling of the sat_no in szap tuned a transponder on occasion > >but it it not repeatable. Why would you send both a diseqc_master > >command AND a tone_burst diseqc_mini? Is this just shotgunning? Anyway > >near as I can tell the timing is crucial (BTW a BEC receiver handles > >this setup fine:). > > szap sends DiSEqC sequences as specified in the spec from > http://www.eutelsat.com/satellites/4_4_5.html. > > Could you please review the code and tell me when you find any bugs? > > thanks, > > Holger
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
