[    0.000000] Linux version 2.6.22-rc7 (root@localhost.localdomain) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 Thu Jul 5 23:41:06 CEST 2007
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f7b0000 (usable)
[    0.000000]  BIOS-e820: 000000003f7b0000 - 000000003f7c0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f7c0000 - 000000003f7f0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000] 119MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000ff780
[    0.000000] Entering add_active_range(0, 0, 260016) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   260016
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   260016
[    0.000000] On node 0 totalpages: 260016
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 239 pages used for memmap
[    0.000000]   HighMem zone: 30401 pages, LIFO batch:7
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F8C50, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 3F7B0000, 0038 (r1 A M I  OEMRSDT   9000612 MSFT       97)
[    0.000000] ACPI: FACP 3F7B0200, 0084 (r2 A M I  OEMFACP   9000612 MSFT       97)
[    0.000000] ACPI: DSDT 3F7B0440, 44A6 (r1  C94GD C94GD112      112 INTL  2002026)
[    0.000000] ACPI: FACS 3F7C0000, 0040
[    0.000000] ACPI: APIC 3F7B0390, 006C (r1 A M I  OEMAPIC   9000612 MSFT       97)
[    0.000000] ACPI: MCFG 3F7B0400, 003C (r1 A M I  OEMMCFG   9000612 MSFT       97)
[    0.000000] ACPI: OEMB 3F7C0040, 0046 (r1 A M I  AMI_OEM   9000612 MSFT       97)
[    0.000000] ACPI: HPET 3F7B48F0, 0038 (r1 A M I  OEMHPET   9000612 MSFT       97)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:4 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:4 APIC version 20
[    0.000000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf500000)
[    0.000000] Built 1 zonelists.  Total pages: 257985
[    0.000000] Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS0,115200n8
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2991.984 MHz processor.
[   27.088374] Console: colour VGA+ 80x25
[   27.091292] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[   27.091382] ... MAX_LOCKDEP_SUBCLASSES:    8
[   27.091438] ... MAX_LOCK_DEPTH:          30
[   27.091494] ... MAX_LOCKDEP_KEYS:        2048
[   27.091550] ... CLASSHASH_SIZE:           1024
[   27.091607] ... MAX_LOCKDEP_ENTRIES:     8192
[   27.091663] ... MAX_LOCKDEP_CHAINS:      16384
[   27.091719] ... CHAINHASH_SIZE:          8192
[   27.091775]  memory used by lock dependency info: 992 kB
[   27.091833]  per task-struct memory footprint: 1200 bytes
[   27.092179] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   27.092569] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   27.115048] Memory: 1021980k/1040064k available (2518k kernel code, 17320k reserved, 1178k data, 276k init, 122560k highmem)
[   27.115152] virtual kernel memory layout:
[   27.115154]     fixmap  : 0xfff9c000 - 0xfffff000   ( 396 kB)
[   27.115155]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   27.115156]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   27.115157]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   27.115158]       .init : 0xc04a0000 - 0xc04e5000   ( 276 kB)
[   27.115160]       .data : 0xc0375a43 - 0xc049c544   (1178 kB)
[   27.115161]       .text : 0xc0100000 - 0xc0375a43   (2518 kB)
[   27.115610] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   27.116116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   27.116261] hpet0: 3 64-bit timers, 14318180 Hz
[   27.177288] Calibrating delay using timer specific routine.. 5988.25 BogoMIPS (lpj=2994125)
[   27.177503] Security Framework v1.0.0 initialized
[   27.177565] SELinux:  Initializing.
[   27.177688] SELinux:  Starting in permissive mode
[   27.177695] selinux_register_security:  Registering secondary module capability
[   27.177784] Capability LSM initialized as secondary
[   27.177871] Mount-cache hash table entries: 512
[   27.178409] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001
[   27.178418] monitor/mwait feature present.
[   27.178474] using mwait in idle threads.
[   27.178535] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   27.178615] CPU: L2 cache: 1024K
[   27.178670] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000641d 00000000 00000001
[   27.178678] Intel machine check architecture supported.
[   27.178740] Intel machine check reporting enabled on CPU#0.
[   27.178799] CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
[   27.178858] CPU0: Thermal monitoring enabled
[   27.178918] Compat vDSO mapped to ffffe000.
[   27.178985] CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[   27.179091] Checking 'hlt' instruction... OK.
[   27.182428] ACPI: Core revision 20070126
[   27.189932] ENABLING IO-APIC IRQs
[   27.190185] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   27.301662] NET: Registered protocol family 16
[   27.302091] ACPI: bus type pci registered
[   27.302159] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support.
[   27.302259] PCI: Using MMCONFIG
[   27.302914] Setting up standard PCI resources
[   27.331299] ACPI: Interpreter enabled
[   27.331359] ACPI: (supports S0 S1 S3 S4 S5)
[   27.331615] ACPI: Using IOAPIC for interrupt routing
[   27.353672] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   27.353758] PCI: Probing PCI hardware (bus 00)
[   27.354608] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   27.354671] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[   27.355679] PCI: Transparent bridge - 0000:00:1e.0
[   27.355790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   27.356285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   27.356572] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   27.356753] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[   27.365696] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   27.366204] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   27.366699] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   27.367227] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   27.367721] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   27.368294] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   27.368860] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   27.369357] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[   27.369903] Linux Plug and Play Support v0.97 (c) Adam Belay
[   27.370013] pnp: PnP ACPI init
[   27.370116] ACPI: bus type pnp registered
[   27.379915] pnp: PnP ACPI: found 17 devices
[   27.379974] ACPI: ACPI bus type pnp unregistered
[   27.380406] usbcore: registered new interface driver usbfs
[   27.380608] usbcore: registered new interface driver hub
[   27.380815] usbcore: registered new device driver usb
[   27.380995] PCI: Using ACPI for IRQ routing
[   27.381053] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   27.381348] NetLabel: Initializing
[   27.381405] NetLabel:  domain hash size = 128
[   27.381461] NetLabel:  protocols = UNLABELED CIPSOv4
[   27.381593] NetLabel:  unlabeled traffic allowed by default
[   27.381781] ACPI: RTC can wake from S4
[   27.381984] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[   27.382061] pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   27.382124] Time: tsc clocksource has been installed.
[   27.382204] pnp: 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
[   27.382289] pnp: 00:0a: iomem range 0xffc00000-0xfff7ffff could not be reserved
[   27.382390] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[   27.382453] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[   27.382554] pnp: 00:0e: ioport range 0x290-0x29f has been reserved
[   27.382624] pnp: 00:0f: iomem range 0xe0000000-0xefffffff could not be reserved
[   27.382723] pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved
[   27.382785] pnp: 00:10: iomem range 0xc0000-0xcffff could not be reserved
[   27.382846] pnp: 00:10: iomem range 0xe0000-0xfffff could not be reserved
[   27.382908] pnp: 00:10: iomem range 0x100000-0x3f7fffff could not be reserved
[   27.414311] PCI: Bridge: 0000:00:1c.0
[   27.414368]   IO window: disabled.
[   27.414428]   MEM window: disabled.
[   27.414487]   PREFETCH window: fdf00000-fdffffff
[   27.414547] PCI: Bridge: 0000:00:1c.1
[   27.414605]   IO window: d000-dfff
[   27.414663]   MEM window: fea00000-feafffff
[   27.414721]   PREFETCH window: disabled.
[   27.414784] PCI: Bridge: 0000:00:1e.0
[   27.414842]   IO window: e000-efff
[   27.414900]   MEM window: feb00000-febfffff
[   27.414958]   PREFETCH window: 40000000-400fffff
[   27.415043] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   27.415163] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   27.415186] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[   27.415298] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   27.415310] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   27.415348] NET: Registered protocol family 2
[   27.425232] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   27.425544] TCP established hash table entries: 65536 (order: 9, 2883584 bytes)
[   27.432431] TCP bind hash table entries: 65536 (order: 9, 2883584 bytes)
[   27.439288] TCP: Hash tables configured (established 65536 bind 65536)
[   27.439379] TCP reno registered
[   27.442902] checking if image is initramfs... it is
[   27.608381] Freeing initrd memory: 1860k freed
[   27.609234] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[   27.609295] apm: overridden by ACPI.
[   27.610357] audit: initializing netlink socket (disabled)
[   27.611068] audit(1183682257.391:1): initialized
[   27.611333] highmem bounce pool size: 64 pages
[   27.611393] Total HugeTLB memory allocated, 0
[   27.611629] VFS: Disk quotas dquot_6.5.1
[   27.611696] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   27.611996] SELinux:  Registering netfilter hooks
[   27.612605] io scheduler noop registered
[   27.612662] io scheduler anticipatory registered
[   27.612719] io scheduler deadline registered
[   27.612803] io scheduler cfq registered (default)
[   27.612878] Boot video device is 0000:00:02.0
[   27.613244] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   27.613293] assign_interrupt_mode Found MSI capability
[   27.613394] Allocate Port Service[0000:00:1c.0:pcie00]
[   27.613546] Allocate Port Service[0000:00:1c.0:pcie02]
[   27.613690] Allocate Port Service[0000:00:1c.0:pcie03]
[   27.613900] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   27.613948] assign_interrupt_mode Found MSI capability
[   27.614052] Allocate Port Service[0000:00:1c.1:pcie00]
[   27.614218] Allocate Port Service[0000:00:1c.1:pcie02]
[   27.614371] Allocate Port Service[0000:00:1c.1:pcie03]
[   27.614710] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   27.710581] ACPI Warning (tbutils-0158): Incorrect checksum in table [  ð] -  00, should be 70 [20070126]
[   27.710733] ACPI Error (tbinstal-0134): Table has invalid signature [  ð], must be SSDT, PSDT or OEMx [20070126]
[   27.710886] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node f7e0e670), AE_BAD_SIGNATURE
[   27.711436] isapnp: Scanning for PnP cards...
[   28.065993] isapnp: No Plug & Play device found
[   28.076437] Real Time Clock Driver v1.12ac
[   28.076916] hpet_resources: 0xfed00000 is busy
[   28.077112] Non-volatile memory driver v1.2
[   28.077171] Linux agpgart interface v0.102 (c) Dave Jones
[   28.078113] agpgart: Detected an Intel 945G Chipset.
[   28.078554] agpgart: Detected 7932K stolen memory.
[   28.093307] agpgart: AGP aperture is 256M @ 0xd0000000
[   28.093958] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   28.095634] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   29.197670] RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
[   29.205647] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   29.212103] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   29.220280] ICH7: IDE controller at PCI slot 0000:00:1f.1
[   29.225742] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   29.233269] ICH7: chipset revision 1
[   29.236897] ICH7: not 100% native mode: will probe irqs later
[   29.242702]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[   29.250104] Probing IDE interface ide0...
[   29.926557] hda: NEC CD-ROM DRIVE:28D, ATAPI CD/DVD-ROM drive
[   30.240647] hda: selected mode 0x42
[   30.240821] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   30.254374] Probing IDE interface ide1...
[   30.770341] ide-floppy driver 0.99.newide
[   30.774975] usbcore: registered new interface driver libusual
[   30.781046] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   30.787279] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   30.796856] serio: i8042 KBD port at 0x60,0x64 irq 1
[   30.801885] serio: i8042 AUX port at 0x60,0x64 irq 12
[   30.807261] mice: PS/2 mouse device common for all mice
[   30.813369] usbcore: registered new interface driver hiddev
[   30.819140] usbcore: registered new interface driver usbhid
[   30.824777] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   30.831211] TCP bic registered
[   30.834319] Initializing XFRM netlink socket
[   30.838686] NET: Registered protocol family 1
[   30.843097] NET: Registered protocol family 17
[   30.847609] Using IPI Shortcut mode
[   30.852203] Freeing unused kernel memory: 276k freed
[   30.857254] Write protecting the kernel read-only data: 926k
[   30.899234] input: AT Translated Set 2 keyboard as /class/input/input0
[   31.165278] SCSI subsystem initialized
[   31.178687] libata version 2.21 loaded.
[   31.181351] ata_piix 0000:00:1f.2: version 2.11
[   31.181362] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   31.186822] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[   31.194478] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   31.194588] scsi0 : ata_piix
[   31.197793] scsi1 : ata_piix
[   31.200960] ata1: SATA max UDMA/133 cmd 0x0001c080 ctl 0x0001c002 bmdma 0x0001b800 irq 0
[   31.209134] ata2: SATA max UDMA/133 cmd 0x0001bc00 ctl 0x0001b882 bmdma 0x0001b808 irq 0
[   31.419259] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[   31.426994] ata1.00: ATA-7: MAXTOR STM3160211AS, 3.AAE, max UDMA/133
[   31.433396] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   31.494152] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[   31.501886] ata1.00: configured for UDMA/133
[   31.667910] ATA: abnormal status 0x7F on port 0x0001bc07
[   31.673548] scsi 0:0:0:0: Direct-Access     ATA      MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
[   31.682248] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   31.689467] sd 0:0:0:0: [sda] Write Protect is off
[   31.694309] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   31.694361] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   31.703688] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   31.710894] sd 0:0:0:0: [sda] Write Protect is off
[   31.715742] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   31.715794] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   31.724931]  sda: sda1 sda2
[   31.751972] sd 0:0:0:0: [sda] Attached SCSI disk
[   31.766982] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[   32.504791] kjournald starting.  Commit interval 5 seconds
[   32.510399] EXT3-fs: mounted filesystem with ordered data mode.
[   32.948709] SELinux:  Disabled at runtime.
[   32.952863] SELinux:  Unregistering netfilter hooks
[   32.958542] audit(1183682262.742:2): selinux=0 auid=4294967295
[   36.428994] hda: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33)
[   36.429004] Uniform CD-ROM driver Revision: 3.20
[   36.483934] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[   36.493966] intel_rng: FWH not detected
[   36.535701] iTCO_vendor_support: vendor-support=0
[   36.540848] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   36.541053] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[   36.541165] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   36.879197] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[   36.879268] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   36.930605] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   37.801686] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   37.807300] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[   37.807342] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   37.807370] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   37.807832] eth0: RTL8168b/8111b at 0xf8a06000, 00:13:8f:ea:b1:5d, XID 38000000 IRQ 221
[   37.814385] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[   37.814413] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 22 (level, low) -> IRQ 20
[   37.814695] eth1: RTL8110s at 0xf8a66800, 00:09:5b:bd:c1:a5, XID 04000000 IRQ 20
[   37.817942] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[   37.817970] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 23 (level, low) -> IRQ 21
[   37.818210] eth2: RTL8110s at 0xf8a68c00, 00:09:5b:bd:c1:a5, XID 04000000 IRQ 21
[   37.845678] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
[   37.845698] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   37.845702] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   37.846264] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[   37.846340] ehci_hcd 0000:00:1d.7: debug port 1
[   37.846348] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   37.846363] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfe937c00
[   37.850260] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   37.850663] usb usb1: configuration #1 chosen from 1 choice
[   37.850764] hub 1-0:1.0: USB hub found
[   37.850794] hub 1-0:1.0: 8 ports detected
[   37.916203] USB Universal Host Controller Interface driver v3.0
[   37.951494] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[   37.951512] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   37.951516] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   37.951641] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   37.951677] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000c400
[   37.952049] usb usb2: configuration #1 chosen from 1 choice
[   37.952142] hub 2-0:1.0: USB hub found
[   37.952182] hub 2-0:1.0: 2 ports detected
[   38.053099] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[   38.053116] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   38.053121] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   38.053252] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[   38.053287] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c480
[   38.053627] usb usb3: configuration #1 chosen from 1 choice
[   38.053715] hub 3-0:1.0: USB hub found
[   38.053734] hub 3-0:1.0: 2 ports detected
[   38.153994] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   38.154012] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   38.154017] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   38.154138] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[   38.154178] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[   38.154517] usb usb4: configuration #1 chosen from 1 choice
[   38.154615] hub 4-0:1.0: USB hub found
[   38.154632] hub 4-0:1.0: 2 ports detected
[   38.254913] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   38.254930] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   38.254934] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   38.255055] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[   38.255094] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c880
[   38.255420] usb usb5: configuration #1 chosen from 1 choice
[   38.255526] hub 5-0:1.0: USB hub found
[   38.255544] hub 5-0:1.0: 2 ports detected
[   38.311657] usb 2-2: new low speed USB device using uhci_hcd and address 2
[   38.475592] usb 2-2: configuration #1 chosen from 1 choice
[   38.491326] drivers/hid/usbhid/hid-core.c: report descriptor (size 50, read 50) =  05 01 09 02 a1 01 09 01 a1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 03 05 01 09 30 09 31 09 38 15 81 25 7f 75 08 95 03 81 06 c0 c0
[   38.491533]   INPUT[INPUT]
[   38.491537]     Field(0)
[   38.491541]       Physical(GenericDesktop.Pointer)
[   38.491547]       Usage(3)
[   38.491551]         Button.0001
[   38.491557]         Button.0002
[   38.491562]         Button.0003
[   38.491567]       Logical Minimum(0)
[   38.491571]       Logical Maximum(1)
[   38.491574]       Report Size(1)
[   38.491578]       Report Count(3)
[   38.491581]       Report Offset(0)
[   38.491585]       Flags( Variable Absolute )
[   38.491592]     Field(1)
[   38.491595]       Physical(GenericDesktop.Pointer)
[   38.491600]       Usage(3)
[   38.491610]         GenericDesktop.X
[   38.491615]         GenericDesktop.Y
[   38.491621]         GenericDesktop.Wheel
[   38.491626]       Logical Minimum(-127)
[   38.491630]       Logical Maximum(127)
[   38.491633]       Report Size(8)
[   38.491636]       Report Count(3)
[   38.491640]       Report Offset(8)
[   38.491643]       Flags( Variable Relative )
[   38.491658] Mapping: Button.0001 ---> Key.LeftBtn
[   38.491664] Mapping: Button.0002 ---> Key.RightBtn
[   38.491668] Mapping: Button.0003 ---> Key.MiddleBtn
[   38.491673] Mapping: GenericDesktop.X ---> Relative.X
[   38.491677] Mapping: GenericDesktop.Y ---> Relative.Y
[   38.491681] Mapping: GenericDesktop.Wheel ---> Relative.Wheel
[   38.491836] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
[   38.491963] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2
[   41.787522] floppy0: no floppy controllers found
[   41.835567] parport_pc 00:06: reported by Plug and Play ACPI
[   41.835674] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[   41.944340] lp0: using parport0 (interrupt-driven).
[   41.944345] lp0: console ready
[   42.176795] No dock devices found.
[   42.235748] input: Power Button (FF) as /class/input/input2
[   42.257558] ACPI: Power Button (FF) [PWRF]
[   42.272848] input: Power Button (CM) as /class/input/input3
[   42.278808] ACPI: Power Button (CM) [PWRB]
[   42.465845] md: Autodetecting RAID arrays.
[   42.470011] md: autorun ...
[   42.472857] md: ... autorun DONE.
[   43.307298] EXT3 FS on dm-0, internal journal
[   43.416827] kjournald starting.  Commit interval 5 seconds
[   43.422506] EXT3 FS on sda1, internal journal
[   43.426966] EXT3-fs: mounted filesystem with ordered data mode.
[   43.945910] Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
[   67.899149] Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
[   67.905480] bonding: MII link monitoring set to 1000 ms
[   72.105063] r8169: eth1: link up
[   72.108464] r8169: eth1: link up
[   72.127335] bonding: bond0: enslaving eth1 as an active interface with an up link.
[   72.244382] r8169: eth2: link up
[   72.247755] r8169: eth2: link up
[   72.268177] bonding: bond0: enslaving eth2 as an active interface with an up link.
[  123.957066] NET: Registered protocol family 10
[  123.962807] lo: Disabled Privacy Extensions
[  123.968887] Mobile IPv6
[  124.126032] bond0: duplicate address detected!
[  124.452066] bond0: duplicate address detected!
[  124.456593] KERNEL: assertion (ifp->lst_next==NULL) failed at net/ipv6/addrconf.c (472)
[  124.464675] Freeing alive inet6 address f4004c68
[  124.716646] bond0: duplicate address detected!
[  124.721155] KERNEL: assertion (ifp->lst_next==NULL) failed at net/ipv6/addrconf.c (472)
[  124.729235] Freeing alive inet6 address f4004c68
[  134.526179] eth2: no IPv6 routers present
[  134.781039] eth1: no IPv6 routers present
