Linux version 2.6.22-7aa4-64-g61e519cb (root@gwy) (gcc version 4.1.3 20070629 (prerelease) (Debian 4.1.2-13)) #1 SMP PREEMPT Thu Jul 12 01:17:31 PDT 2007
Command line: BOOT_IMAGE=LinuxOLD ro root=805
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
 BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000ceee0000 (usable)
 BIOS-e820: 00000000ceee0000 - 00000000ceee3000 (ACPI NVS)
 BIOS-e820: 00000000ceee3000 - 00000000ceef0000 (ACPI data)
 BIOS-e820: 00000000ceef0000 - 00000000cef00000 (reserved)
 BIOS-e820: 00000000cf000000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 847584) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
end_pfn_map = 1245184
DMI 2.4 present.
ACPI: RSDP 000F7A10, 0014 (r0 GATEWA)
ACPI: RSDT CEEE3040, 003C (r1 GATEWA SYSTEM   42302E31 AWRD        0)
ACPI: FACP CEEE30C0, 0074 (r1 GATEWA SYSTEM   42302E31 AWRD        0)
ACPI Warning (tbfadt-0434): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126]
ACPI: DSDT CEEE3180, 5F52 (r1 GATEWA SYSTEM       1000 MSFT  100000E)
ACPI: FACS CEEE0000, 0040
ACPI: SSDT CEEE9200, 0248 (r1 PTLTD  POWERNOW        1  LTP        1)
ACPI: HPET CEEE94C0, 0038 (r1 GATEWA SYSTEM   42302E31 AWRD       98)
ACPI: SLIC CEEE9540, 0176 (r1 GATEWA SYSTEM   42302E31 AWRD        1)
ACPI: MCFG CEEE9700, 003C (r1 GATEWA SYSTEM   42302E31 AWRD        0)
ACPI: APIC CEEE9140, 007C (r1 GATEWA SYSTEM   42302E31 AWRD        0)
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000130000000
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 847584) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
Bootmem setup node 0 0000000000000000-0000000130000000
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1245184
early_node_map[3] active PFN ranges
    0:        0 ->      157
    0:      256 ->   847584
    0:  1048576 ->  1245184
On node 0 totalpages: 1044093
  DMA zone: 88 pages used for memmap
  DMA zone: 2317 pages reserved
  DMA zone: 1592 pages, LIFO batch:0
  DMA32 zone: 22440 pages used for memmap
  DMA32 zone: 821048 pages, LIFO batch:31
  Normal zone: 4224 pages used for memmap
  Normal zone: 192384 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
swsusp: Registered nosave memory region: 00000000ceee0000 - 00000000ceee3000
swsusp: Registered nosave memory region: 00000000ceee3000 - 00000000ceef0000
swsusp: Registered nosave memory region: 00000000ceef0000 - 00000000cef00000
swsusp: Registered nosave memory region: 00000000cef00000 - 00000000cf000000
swsusp: Registered nosave memory region: 00000000cf000000 - 00000000d0000000
swsusp: Registered nosave memory region: 00000000d0000000 - 00000000f0000000
swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f4000000
swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fec00000
swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at d2000000 (gap: d0000000:20000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 33288 bytes of per cpu data
Built 1 zonelists.  Total pages: 1015024
Kernel command line: BOOT_IMAGE=LinuxOLD ro root=805
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2410.784 MHz processor.
Console: colour VGA+ 80x25
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:    8
... MAX_LOCK_DEPTH:          30
... MAX_LOCKDEP_KEYS:        2048
... CLASSHASH_SIZE:           1024
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 1648 kB
 per task-struct memory footprint: 1680 bytes
Checking aperture...
CPU 0: aperture @ 8000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
Memory: 3994152k/4980736k available (2895k kernel code, 182220k reserved, 1559k data, 324k init)
Calibrating delay using timer specific routine.. 4825.86 BogoMIPS (lpj=2412933)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
lockdep: not fixing up alternatives.
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12556153
Detected 12.556 MHz APIC timer.
lockdep: not fixing up alternatives.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4821.66 BogoMIPS (lpj=2410832)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
Brought up 2 CPUs
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: No mmconfig possible on device 00:18
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:04.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
Generic PHY: Registered new driver
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
pnp: 00:01: ioport range 0x1000-0x107f has been reserved
pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
pnp: 00:01: ioport range 0x1400-0x147f has been reserved
pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
pnp: 00:01: ioport range 0x1800-0x187f has been reserved
pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: ioport range 0x2000-0x207f has been reserved
pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
pnp: 00:01: iomem range 0x0-0x0 could not be reserved
pnp: 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
pnp: 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
pnp: 00:01: iomem range 0xcf000000-0xcfffffff could not be reserved
pnp: 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reserved
pnp: 00:0d: iomem range 0xf0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0xfeff0000-0xfeff00ff has been reserved
pnp: 00:0d: iomem range 0xceee0000-0xceefffff could not be reserved
Time: hpet clocksource has been installed.
pnp: 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
PCI: Bridge: 0000:01:05.0
  IO window: a000-afff
  MEM window: fde00000-fdefffff
  PREFETCH window: fd900000-fd9fffff
PCI: Bridge: 0000:00:04.0
  IO window: a000-bfff
  MEM window: fde00000-fdffffff
  PREFETCH window: fd900000-fd9fffff
PCI: Bridge: 0000:00:09.0
  IO window: 9000-9fff
  MEM window: f8000000-faffffff
  PREFETCH window: e0000000-efffffff
PCI: Bridge: 0000:00:0b.0
  IO window: 8000-8fff
  MEM window: fdd00000-fddfffff
  PREFETCH window: fdc00000-fdcfffff
PCI: Bridge: 0000:00:0c.0
  IO window: 7000-7fff
  MEM window: fdb00000-fdbfffff
  PREFETCH window: fda00000-fdafffff
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:01:05.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 13, 33554432 bytes)
TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
microcode: CPU0 not a capable Intel processor
microcode: CPU1 not a capable Intel processor
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Initializing RT-Tester: OK
audit: initializing netlink socket (disabled)
audit(1184283193.388:1): initialized
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:03:00.0
PCI: Setting latency timer of device 0000:00:09.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:09.0:pcie00]
Allocate Port Service[0000:00:09.0:pcie03]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Enabling device 0000:00:0d.0 (0000 -> 0002)
ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [AIGP] -> GSI 23 (level, low) -> IRQ 23
nvidiafb: Device ID: 10de03d0 
nvidiafb: unknown NV_ARCH
ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16
nvidiafb: Device ID: 10de0295 
nvidiafb: CRTC0 analog not found
nvidiafb: CRTC1 analog not found
edid: 1920 x 1200, 6493
nvidiafb: EDID found from BUS1
edid: 1920 x 540, 13468
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 0 is currently programmed for DFP
nvidiafb: Using DFP on CRTC 0
nvidiafb: Panel size is 1920 x 1200
nvidiafb: Panel is TMDS
nvidiafb: MTRR set to ON
nvidiafb: Flat panel dithering disabled
Console: switching to colour frame buffer device 240x75
nvidiafb: PCI nVidia NV29 framebuffer (64MB @ 0xE0000000)
input: Power Button (FF) as /devices/virtual/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (40 C)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfeff0000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
[drm] Initialized drm 1.1.0 20060810
netconsole: not configured, aborting
sata_nv 0000:00:08.0: version 3.4
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001dc00 irq 380
ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001dc08 irq 380
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: Hitachi HDT725032VLA380, V54OA52A, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDT72503 V54O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access     ATA      ST3750640AS      3.AA PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:08.1[B] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:08.1 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001c800 irq 379
ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001c808 irq 379
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
pata_amd 0000:00:06.0: version 0.3.8
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14
ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15
ata5.00: ATAPI: ATAPI   DVD W  DH16W1P, LG12, max UDMA/66
ata5.00: limited to UDMA/33 due to 40-wire cable
ata5.00: configured for UDMA/33
ata6: port disabled. ignoring.
scsi 4:0:0:0: CD-ROM            ATAPI    DVD W  DH16W1P   LG12 PQ: 0 ANSI: 5
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
input: PC Speaker as /devices/platform/pcspkr/input/input3
TCP cubic registered
NET: Registered protocol family 1
powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (version 2.00.00)
powernow-k8:    0 : fid 0x10 (2400 MHz), vid 0x8
powernow-k8:    1 : fid 0xe (2200 MHz), vid 0xa
powernow-k8:    2 : fid 0xc (2000 MHz), vid 0xc
powernow-k8:    3 : fid 0xa (1800 MHz), vid 0xe
powernow-k8:    4 : fid 0x2 (1000 MHz), vid 0x12
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Found 512b device! Using larger block size...
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: sda5: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 7324797
ext3_orphan_cleanup: deleting unreferenced inode 7324796
ext3_orphan_cleanup: deleting unreferenced inode 7324712
ext3_orphan_cleanup: deleting unreferenced inode 7324555
ext3_orphan_cleanup: deleting unreferenced inode 7324534
EXT3-fs: sda5: 5 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 324k freed
Write protecting the kernel read-only data: 1248k
i2c-adapter i2c-3: nForce2 SMBus adapter at 0x1c00
i2c-adapter i2c-4: nForce2 SMBus adapter at 0xf400
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Found 512b device! Using larger block size...
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:04:00.0 to 64
sky2 0000:04:00.0: v1.16 addr 0xfddfc000 irq 16 Yukon-FE (0xb7) rev 3
sky2 eth0: addr 00:19:21:7a:d7:97
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 4:0:0:0: Attached scsi generic sg2 type 5
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:02:01.2[C] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:02:01.2: EHCI Host Controller
ehci_hcd 0000:02:01.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:02:01.2: irq 19, io mem 0xfdefc000
ehci_hcd 0000:02:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sata_sil24 0000:05:00.0: version 1.0
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:05:00.0 to 64
scsi6 : sata_sil24
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
scsi7 : sata_sil24
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
ata7: SATA max UDMA/100 cmd 0xffffc20000668000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
ata8: SATA max UDMA/100 cmd 0xffffc2000066a000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 10 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 5
usb 1-5: configuration #1 chosen from 1 choice
usb 3-3: new full speed USB device using ohci_hcd and address 2
usb 3-3: configuration #1 chosen from 1 choice
usb 3-4: new full speed USB device using ohci_hcd and address 3
usb 3-4: configuration #1 chosen from 1 choice
usb 1-1.1: new low speed USB device using ehci_hcd and address 6
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
usb 1-1.1: configuration #1 chosen from 1 choice
ata7.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x9/0x9
ata7.00: hard resetting link
usb 1-1.3: new full speed USB device using ehci_hcd and address 7
usb 1-1.3: configuration #1 chosen from 1 choice
usb 1-1.4: new full speed USB device using ehci_hcd and address 8
usb 1-1.4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver libusual
usbcore: registered new interface driver snd-usb-audio
input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.1-1.1
input: C-Media USB Headphone Set   as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.3/1-1.3:1.3/input/input5
input: USB HID v1.00 Device [C-Media USB Headphone Set  ] on usb-0000:00:02.1-1.3
usbcore: registered new interface driver usbhid
/usr/src/git/libata-pv/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.01: hard resetting link
Initializing USB Mass Storage driver...
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
ata7.01: SATA link down (SStatus 0 SControl 300)
ata7.02: hard resetting link
ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.03: hard resetting link
ata7.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.04: hard resetting link
ata7.04: SATA link down (SStatus 0 SControl 300)
ata7.05: hard resetting link
ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: ATA-7: Hitachi HDS721010KLA330, GKAOA70F, max UDMA/133
ata7.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/100
ata7.02: ATA-7: Hitachi HDS721010KLA330, GKAOA70F, max UDMA/133
ata7.02: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata7.02: configured for UDMA/100
ata7.03: ATA-7: ST3750640AS, 3.AAD, max UDMA/133
ata7.03: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata7.03: configured for UDMA/100
ata7: EH complete
usb-storage: device scan complete
scsi 8:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
scsi 8:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
scsi 8:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
scsi 8:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
sd 8:0:0:0: [sdc] Attached SCSI removable disk
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:1: [sdd] Attached SCSI removable disk
sd 8:0:0:1: Attached scsi generic sg4 type 0
sd 8:0:0:2: [sde] Attached SCSI removable disk
sd 8:0:0:2: Attached scsi generic sg5 type 0
sd 8:0:0:3: [sdf] Attached SCSI removable disk
sd 8:0:0:3: Attached scsi generic sg6 type 0
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
ata8.00: ATA-6: Sans Digital    V.36.B0B, V.36.B0B, max UDMA/133
ata8.00: 1465149168 sectors, multi 16: LBA48 
ata8.00: applying bridge limits
ata8.00: configured for UDMA/100
scsi 6:0:0:0: Direct-Access     ATA      Hitachi HDS72101 GKAO PQ: 0 ANSI: 5
sd 6:0:0:0: [sdg] 1953525168 512-byte hardware sectors (1000205 MB)
sd 6:0:0:0: [sdg] Write Protect is off
sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdg] 1953525168 512-byte hardware sectors (1000205 MB)
sd 6:0:0:0: [sdg] Write Protect is off
sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdg: sdg1
sd 6:0:0:0: [sdg] Attached SCSI disk
sd 6:0:0:0: Attached scsi generic sg7 type 0
scsi 6:0:2:0: Direct-Access     ATA      Hitachi HDS72101 GKAO PQ: 0 ANSI: 5
sd 6:0:2:0: [sdh] 1953525168 512-byte hardware sectors (1000205 MB)
sd 6:0:2:0: [sdh] Write Protect is off
sd 6:0:2:0: [sdh] Mode Sense: 00 3a 00 00
sd 6:0:2:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:2:0: [sdh] 1953525168 512-byte hardware sectors (1000205 MB)
sd 6:0:2:0: [sdh] Write Protect is off
sd 6:0:2:0: [sdh] Mode Sense: 00 3a 00 00
sd 6:0:2:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdh: sdh1
sd 6:0:2:0: [sdh] Attached SCSI disk
sd 6:0:2:0: Attached scsi generic sg8 type 0
scsi 6:0:3:0: Direct-Access     ATA      ST3750640AS      3.AA PQ: 0 ANSI: 5
sd 6:0:3:0: [sdi] 1465149168 512-byte hardware sectors (750156 MB)
sd 6:0:3:0: [sdi] Write Protect is off
sd 6:0:3:0: [sdi] Mode Sense: 00 3a 00 00
sd 6:0:3:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:3:0: [sdi] 1465149168 512-byte hardware sectors (750156 MB)
sd 6:0:3:0: [sdi] Write Protect is off
sd 6:0:3:0: [sdi] Mode Sense: 00 3a 00 00
sd 6:0:3:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdi: sdi1
sd 6:0:3:0: [sdi] Attached SCSI disk
sd 6:0:3:0: Attached scsi generic sg9 type 0
scsi 7:0:0:0: Direct-Access     ATA      Sans Digital     V.36 PQ: 0 ANSI: 5
sd 7:0:0:0: [sdj] 1465149168 512-byte hardware sectors (750156 MB)
sd 7:0:0:0: [sdj] Write Protect is off
sd 7:0:0:0: [sdj] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdj] 1465149168 512-byte hardware sectors (750156 MB)
sd 7:0:0:0: [sdj] Write Protect is off
sd 7:0:0:0: [sdj] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdj: sdj1
sd 7:0:0:0: [sdj] Attached SCSI disk
sd 7:0:0:0: Attached scsi generic sg10 type 0
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:05.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Found 512b device! Using larger block size...
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:01.0 to 64
ohci_hcd 0000:02:01.0: OHCI Host Controller
ohci_hcd 0000:02:01.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:02:01.0: irq 17, io mem 0xfdefe000
Found 512b device! Using larger block size...
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:01.1[B] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:02:01.1 to 64
ohci_hcd 0000:02:01.1: OHCI Host Controller
ohci_hcd 0000:02:01.1: new USB bus registered, assigned bus number 5
ohci_hcd 0000:02:01.1: irq 18, io mem 0xfdefd000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:01:09.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fdfff000-fdfff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:02:03.0 to 64
usbcore: registered new interface driver usbserial
/usr/src/git/libata-pv/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fdefb000-fdefb7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
usbcore: registered new interface driver usbserial_generic
/usr/src/git/libata-pv/drivers/usb/serial/usb-serial.c: USB Serial Driver core
/usr/src/git/libata-pv/drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
ftdi_sio 3-3:1.0: FTDI USB Serial Device converter detected
/usr/src/git/libata-pv/drivers/usb/serial/ftdi_sio.c: Detected FT8U232AM
usb 3-3: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio 3-4:1.0: FTDI USB Serial Device converter detected
/usr/src/git/libata-pv/drivers/usb/serial/ftdi_sio.c: Detected FT8U232AM
usb 3-4: FTDI USB Serial Device converter now attached to ttyUSB1
usbcore: registered new interface driver ftdi_sio
/usr/src/git/libata-pv/drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00000ae6ff69f8e8]
Adding 2722976k swap on /dev/sda6.  Priority:-1 extents:1 across:2722976k
ieee1394: unsolicited response packet received - no tlabel match
ieee1394: unsolicited response packet received - no tlabel match
Found 512b device! Using larger block size...
Found 512b device! Using larger block size...
Found 512b device! Using larger block size...
Found 512b device! Using larger block size...
ieee1394: Node added: ID:BUS[1-00:1023]  GUID[001225fffeecd99f]
ieee1394: Host added: ID:BUS[1-02:1023]  GUID[0001080020033871]
NOTE: The dv1394 driver is unsupported and may be removed in a future Linux release. Use raw1394 instead.
ieee1394: raw1394: /dev/raw1394 device initialized
EXT3 FS on sda5, internal journal
loop: module loaded
Found 512b device! Using larger block size...
Found 512b device! Using larger block size...
Found 512b device! Using larger block size...
Found 512b device! Using larger block size...
Found 512b device! Using larger block size...
Found 512b device! Using larger block size...
Found 512b device! Using larger block size...
Found 512b device! Using larger block size...
fuse init (API version 7.8)
Found 512b device! Using larger block size...
Found 512b device! Using larger block size...
NTFS driver 2.1.28 [Flags: R/O MODULE].
Found 512b device! Using larger block size...
NTFS volume version 3.1.
NTFS volume version 3.1.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdi1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdj1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Found 512b device! Using larger block size...
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdg1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Found 512b device! Using larger block size...
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdh1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 15
aoe: AoE v32 initialised.
sky2 eth0: enabling interface
sky2 eth0: ram buffer 4K
NET: Registered protocol family 17
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00020002 <device error via D2H FIS> 
ata8.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 512 in
         res 51/04:01:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdj] 1465149168 512-byte hardware sectors (750156 MB)
sd 7:0:0:0: [sdj] Write Protect is off
sd 7:0:0:0: [sdj] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
NET: Registered protocol family 4
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
