early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[    0.000000] Linux version 4.2.0-rc5-00049-g02507c9 (kbuild@lkp-hsx03) (gcc version 5.2.1 20150911 (Debian 5.2.1-17) ) #115 SMP Fri Nov 6 09:02:22 CST 2015
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x1000000
[    0.000000] MTRR: Disabled
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6620-0x000f662f] mapped at [c00f6620]
[    0.000000]   mpc: f6630-f671c
[    0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x13200000-0x133fffff]
[    0.000000]  [mem 0x13200000-0x133fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x131fffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x131fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x13400000-0x13fdffff]
[    0.000000]  [mem 0x13400000-0x13dfffff] page 2M
[    0.000000]  [mem 0x13e00000-0x13fdffff] page 4k
[    0.000000] BRK [0x01838000, 0x01838fff] PGTABLE
[    0.000000] BRK [0x01839000, 0x01839fff] PGTABLE
[    0.000000] BRK [0x0183a000, 0x0183afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x134fd000-0x13fdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6410 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x0000000013FE1737 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x0000000013FE0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x0000000013FE0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x0000000013FE0000 000040
[    0.000000] ACPI: SSDT 0x0000000013FE0C88 0009F7 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x0000000013FE167F 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x0000000013FE16FF 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 319MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 13fe0000
[    0.000000]   low ram: 0 - 13fe0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:134fc001, primary cpu clock
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000013fdffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000013fdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff]
[    0.000000] On node 0 totalpages: 81790
[    0.000000] free_area_init_node: node 0, pgdat c1747280, node_mem_map d327c020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 608 pages used for memmap
[    0.000000]   Normal zone: 77792 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 16 pages/cpu @d3257000 s33472 r0 d32064 u65536
[    0.000000] pcpu-alloc: s33472 r0 d32064 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1325aac0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 81150
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-i386-44/bisect_boot-1-yocto-minimal-i386.cgz-i386-randconfig-s0-201544-02507c91c8944d71dae65bddc45b764be65069f8-20151106-77560-6wi3gc-0.yaml ARCH=i386 kconfig=i386-randconfig-s0-201544 branch=linux-devel/devel-catchup-201511060708 commit=02507c91c8944d71dae65bddc45b764be65069f8 BOOT_IMAGE=/pkg/linux/i386-randconfig-s0-201544/gcc-5/02507c91c8944d71dae65bddc45b764be65069f8/vmlinuz-4.2.0-rc5-00049-g02507c9 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-i386/yocto-minimal-i386.cgz/i386-randconfig-s0-201544/gcc-5/02507c91c8944d71dae65bddc45b764be65069f8/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-kbuild-yocto-i386-44::dhcp drbd.minor_count=8
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Memory: 304400K/327160K available (5410K kernel code, 273K rwdata, 1784K rodata, 548K init, 300K bss, 22760K reserved, 0K cma-reserved)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     vmalloc : 0xd47e0000 - 0xffd34000   ( 693 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd3fe0000   ( 319 MB)
[    0.000000]       .init : 0xc174e000 - 0xc17d7000   ( 548 kB)
[    0.000000]       .data : 0xc1548ced - 0xc174c640   (2062 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1548ced   (5411 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=d2c0a000 soft=d2c0c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Linux version 4.2.0-rc5-00049-g02507c9 (kbuild@lkp-hsx03) (gcc version 5.2.1 20150911 (Debian 5.2.1-17) ) #115 SMP Fri Nov 6 09:02:22 CST 2015
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x1000000
[    0.000000] MTRR: Disabled
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6620-0x000f662f] mapped at [c00f6620]
[    0.000000]   mpc: f6630-f671c
[    0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x13200000-0x133fffff]
[    0.000000]  [mem 0x13200000-0x133fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x131fffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x131fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x13400000-0x13fdffff]
[    0.000000]  [mem 0x13400000-0x13dfffff] page 2M
[    0.000000]  [mem 0x13e00000-0x13fdffff] page 4k
[    0.000000] BRK [0x01838000, 0x01838fff] PGTABLE
[    0.000000] BRK [0x01839000, 0x01839fff] PGTABLE
[    0.000000] BRK [0x0183a000, 0x0183afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x134fd000-0x13fdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6410 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x0000000013FE1737 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x0000000013FE0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x0000000013FE0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x0000000013FE0000 000040
[    0.000000] ACPI: SSDT 0x0000000013FE0C88 0009F7 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x0000000013FE167F 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x0000000013FE16FF 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 319MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 13fe0000
[    0.000000]   low ram: 0 - 13fe0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:134fc001, primary cpu clock
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000013fdffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000013fdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff]
[    0.000000] On node 0 totalpages: 81790
[    0.000000] free_area_init_node: node 0, pgdat c1747280, node_mem_map d327c020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 608 pages used for memmap
[    0.000000]   Normal zone: 77792 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 16 pages/cpu @d3257000 s33472 r0 d32064 u65536
[    0.000000] pcpu-alloc: s33472 r0 d32064 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1325aac0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 81150
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-i386-44/bisect_boot-1-yocto-minimal-i386.cgz-i386-randconfig-s0-201544-02507c91c8944d71dae65bddc45b764be65069f8-20151106-77560-6wi3gc-0.yaml ARCH=i386 kconfig=i386-randconfig-s0-201544 branch=linux-devel/devel-catchup-201511060708 commit=02507c91c8944d71dae65bddc45b764be65069f8 BOOT_IMAGE=/pkg/linux/i386-randconfig-s0-201544/gcc-5/02507c91c8944d71dae65bddc45b764be65069f8/vmlinuz-4.2.0-rc5-00049-g02507c9 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-i386/yocto-minimal-i386.cgz/i386-randconfig-s0-201544/gcc-5/02507c91c8944d71dae65bddc45b764be65069f8/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-kbuild-yocto-i386-44::dhcp drbd.minor_count=8
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Memory: 304400K/327160K available (5410K kernel code, 273K rwdata, 1784K rodata, 548K init, 300K bss, 22760K reserved, 0K cma-reserved)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     vmalloc : 0xd47e0000 - 0xffd34000   ( 693 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd3fe0000   ( 319 MB)
[    0.000000]       .init : 0xc174e000 - 0xc17d7000   ( 548 kB)
[    0.000000]       .data : 0xc1548ced - 0xc174c640   (2062 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1548ced   (5411 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=d2c0a000 soft=d2c0c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.008000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=10774032)
[    0.008638] pid_max: default: 32768 minimum: 301
[    0.012019] ACPI: Core revision 20150619
[    0.017418] ACPI: All ACPI Tables successfully acquired
[    0.018884] Security Framework initialized
[    0.020026] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.021288] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.022873] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.024010] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.030836] Freeing SMP alternatives memory: 24K (c17d7000 - c17dd000)
[    0.040322] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.044085] enabled ExtINT on CPU#0
[    0.045780] ENABLING IO-APIC IRQs
[    0.046535] init IO_APIC IRQs
[    0.047231]  apic 0 pin 0 not connected
[    0.048016] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.052017] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.056000] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.056000] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.056000] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.056000] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.056000] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.056000] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.056000] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.056000] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.056000] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.056000] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.056000] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.056000] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.056000] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.056000]  apic 0 pin 16 not connected
[    0.056000]  apic 0 pin 17 not connected
[    0.056000]  apic 0 pin 18 not connected
[    0.056000]  apic 0 pin 19 not connected
[    0.056000]  apic 0 pin 20 not connected
[    0.056000]  apic 0 pin 21 not connected
[    0.056000]  apic 0 pin 22 not connected
[    0.056000]  apic 0 pin 23 not connected
[    0.056000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056000] Using local APIC timer interrupts.
[    0.056000] calibrating APIC timer ...
[    0.060000] ... lapic delta = 12249888
[    0.060000] ... PM-Timer delta = 701594
[    0.060000] APIC calibration not consistent with PM-Timer: 196ms instead of 100ms
[    0.060000] APIC delta adjusted to PM-Timer: 6249905 (12249888)
[    0.060000] TSC delta adjusted to PM-Timer: 269348177 (527925558)
[    0.060000] ..... delta 6249905
[    0.060000] ..... mult: 268431375
[    0.060000] ..... calibration result: 3999939
[    0.060000] ..... CPU clock speed is 2693.1927 MHz.
[    0.060000] ..... host bus clock speed is 999.3939 MHz.
[    0.060069] smpboot: CPU0: Intel QEMU Virtual CPU version 2.4.0 (fam: 06, model: 06, stepping: 03)
[    0.064673] Performance Events: Broken PMU hardware detected, using software events only.
[    0.076009] Failed to access perfctr msr (MSR c2 is 0)
[    0.078649] CPU 1 irqstacks, hard=d2c86000 soft=d2c88000
[    0.080007] x86: Booting SMP configuration:
[    0.084004] .... node  #0, CPUs:      #1
[    0.004000] Initializing CPU#1
[    0.008000] kvm-clock: cpu 1, msr 0:134fc041, secondary cpu clock
[    0.008000] masked ExtINT on CPU#1
[    0.100495] x86: Booted up 1 node, 2 CPUs
[    0.104004] smpboot: Total of 2 processors activated (10774.03 BogoMIPS)
[    0.100475] KVM setup async PF for cpu 1
[    0.100475] kvm-stealtime: cpu 1, msr 1326aac0
[    0.107541] devtmpfs: initialized
[    0.108479] evm: security.capability
[    0.110303] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.116091] xor: measuring software checksum speed
[    0.160006]    pIII_sse  :  5897.000 MB/sec
[    0.200005]    prefetch64-sse:  6620.000 MB/sec
[    0.200922] xor: using function: prefetch64-sse (6620.000 MB/sec)
[    0.202018] prandom: seed boundary self test passed
[    0.204673] prandom: 100 self tests passed
[    0.208220] NET: Registered protocol family 16
[    0.220021] cpuidle: using governor ladder
[    0.236015] cpuidle: using governor menu
[    0.244048] ACPI: bus type PCI registered
[    0.248144] PCI: PCI BIOS revision 2.10 entry at 0xfd40f, last bus=0
[    0.252004] PCI: Using configuration type 1 for base access
[    0.332010] raid6: mmxx1    gen()  1888 MB/s
[    0.400011] raid6: mmxx2    gen()  2319 MB/s
[    0.468035] raid6: sse1x1   gen()  2191 MB/s
[    0.536012] raid6: sse1x2   gen()  1308 MB/s
[    0.604022] raid6: sse2x1   gen()  2180 MB/s
[    0.676012] raid6: sse2x1   xor()  4012 MB/s
[    0.744010] raid6: sse2x2   gen()  4350 MB/s
[    0.812008] raid6: sse2x2   xor()  2614 MB/s
[    0.812910] raid6: using algorithm sse2x2 gen() 4350 MB/s
[    0.813925] raid6: .... xor() 2614 MB/s, rmw enabled
[    0.814877] raid6: using intx1 recovery algorithm
[    0.816022] ACPI: Added _OSI(Module Device)
[    0.816935] ACPI: Added _OSI(Processor Device)
[    0.817913] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.818841] ACPI: Added _OSI(Processor Aggregator Device)
[    0.824508] ACPI: Interpreter enabled
[    0.825429] ACPI: (supports S0 S5)
[    0.826201] ACPI: Using IOAPIC for interrupt routing
[    0.827225] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.833114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.834266] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.835334] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.836020] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.838143] PCI host bridge to bus 0000:00
[    0.839006] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.840005] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.841199] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.842420] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.844005] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff window]
[    0.845457] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.848535] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.850510] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.860613] pci 0000:00:01.1: reg 0x20: [io  0xc080-0xc08f]
[    0.865670] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.867026] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.868005] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.869369] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.870870] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.872408] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.876033] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.877683] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.881083] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.892012] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.908011] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.912241] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.917679] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.924734] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.940011] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.944389] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.949621] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.956927] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.969033] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    0.972005] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[    0.988444] pci_bus 0000:00: on NUMA node 0
[    0.990092] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.998934] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.004148] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.008741] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.012981] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.016824] ACPI: Enabled 16 GPEs in block 00 to 0F
[    1.018279] vgaarb: setting as boot device: PCI:0000:00:02.0
[    1.018279] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.018279] vgaarb: loaded
[    1.018279] vgaarb: bridge control possible 0000:00:02.0
[    1.018279] ACPI: bus type USB registered
[    1.018279] usbcore: registered new interface driver usbfs
[    1.018327] usbcore: registered new interface driver hub
[    1.018327] usbcore: registered new device driver usb
[    1.018327] pps_core: LinuxPPS API ver. 1 registered
[    1.018540] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.024018] PCI: Using ACPI for IRQ routing
[    1.024018] PCI: pci_cache_line_size set to 32 bytes
[    1.024018] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.024018] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff]
[    1.048907] clocksource: Switched to clocksource kvm-clock
[    1.050270] FS-Cache: Loaded
[    1.051127] pnp: PnP ACPI init
[    1.052042] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.053365] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.054508] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.087491] pnp 00:03: [dma 2]
[    1.092336] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.093829] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.095202] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.100825] pnp: PnP ACPI: found 6 devices
[    1.144141] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.145978] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.147312] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.152569] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.153715] pci_bus 0000:00: resource 7 [mem 0x14000000-0xfebfffff window]
[    1.154898] NET: Registered protocol family 1
[    1.155710] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.161045] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.162214] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.163392] pci 0000:00:02.0: Video device with shadowed ROM
[    1.168511] PCI: CLS 0 bytes, default 32
[    1.169378] Unpacking initramfs...
[    1.768506] Freeing initrd memory: 11148K (d34fd000 - d3fe0000)
[    1.770122] Machine check injector initialized
[    1.771501] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.772801] Initialise system trusted keyring
[    1.795459] zpool: loaded
[    1.796372] VFS: Disk quotas dquot_6.6.0
[    1.797269] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.799696] QNX4 filesystem 0.2.3 registered.
[    1.800670] qnx6: QNX6 filesystem 1.0.0 registered.
[    1.801619] fuse init (API version 7.23)
[    1.817261] JFS: nTxBlock = 2465, nTxLock = 19723
[    1.829637] NILFS version 2 loaded
[    1.830491] befs: version: 0.9.3
[    1.846105] Key type asymmetric registered
[    1.847078] Asymmetric key parser 'x509' registered
[    1.848125] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.849686] io scheduler noop registered (default)
[    1.866807] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1
[    1.867930] crc32: self tests passed, processed 225944 bytes in 4129066 nsec
[    1.881714] crc32c: CRC_LE_BITS = 1
[    1.882675] crc32c: self tests passed, processed 225944 bytes in 6842203 nsec
[    2.304798] crc32_combine: 8373 self tests passed
[    2.720172] crc32c_combine: 8373 self tests passed
[    2.729550] hgafb: HGA card not detected.
[    2.730475] hgafb: probe of hgafb.0 failed with error -22
[    2.731683] usbcore: registered new interface driver udlfb
[    2.745095] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.746783] ACPI: Power Button [PWRF]
[    2.789966] tsc: Refined TSC clocksource calibration: 2693.500 MHz
[    2.791026] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d3422dad3, max_idle_ns: 440795300981 ns
[    2.820969] HDLC line discipline maxframe=4096
[    2.822080] N_HDLC line discipline registered.
[    2.823155] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.922374] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.924638] smapi::smapi_init, ERROR invalid usSmapiID
[    2.925705] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[    2.927608] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[    2.929212] mwave: mwavedd::mwave_init: Error: Failed to initialize
[    2.930450] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    2.973874] Failed to find cpu0 device node
[    2.974858] Unable to detect cache hierarchy from DT for CPU 0
[    2.976073] dummy-irq: no IRQ given.  Use irq=N
[    2.977049] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[    2.978726] c2port c2port0: C2 port uc added
[    2.979663] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[    2.981440] usbcore: registered new interface driver viperboard
[    2.997080] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.998396] ohci-pci: OHCI PCI platform driver
[    2.999384] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver
[    3.000616] Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    3.002472] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[    3.009620] usbcore: registered new interface driver usblp
[    3.010824] usbcore: registered new interface driver usbserial
[    3.016100] usbcore: registered new interface driver aircable
[    3.017350] usbserial: USB Serial support registered for aircable
[    3.018642] usbcore: registered new interface driver belkin_sa
[    3.019880] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[    3.025994] usbcore: registered new interface driver cp210x
[    3.027239] usbserial: USB Serial support registered for cp210x
[    3.032522] usbcore: registered new interface driver digi_acceleport
[    3.033793] usbserial: USB Serial support registered for Digi 2 port USB adapter
[    3.035483] usbserial: USB Serial support registered for Digi 4 port USB adapter
[    3.041384] usbcore: registered new interface driver garmin_gps
[    3.042714] usbserial: USB Serial support registered for Garmin GPS usb/tty
[    3.048291] usbcore: registered new interface driver ir_usb
[    3.049530] usbserial: USB Serial support registered for IR Dongle
[    3.050833] usbcore: registered new interface driver iuu_phoenix
[    3.056177] usbserial: USB Serial support registered for iuu_phoenix
[    3.057457] usbcore: registered new interface driver keyspan_pda
[    3.058665] usbserial: USB Serial support registered for Keyspan PDA
[    3.059924] usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration)
[    3.065732] usbcore: registered new interface driver mct_u232
[    3.066915] usbserial: USB Serial support registered for MCT U232
[    3.067976] usbcore: registered new interface driver mos7720
[    3.073193] usbserial: USB Serial support registered for Moschip 2 port adapter
[    3.074749] usbcore: registered new interface driver navman
[    3.075814] usbserial: USB Serial support registered for navman
[    3.081227] usbcore: registered new interface driver opticon
[    3.082413] usbserial: USB Serial support registered for opticon
[    3.083620] usbcore: registered new interface driver pl2303
[    3.088833] usbserial: USB Serial support registered for pl2303
[    3.090069] usbcore: registered new interface driver qcaux
[    3.091224] usbserial: USB Serial support registered for qcaux
[    3.096599] usbcore: registered new interface driver qcserial
[    3.097855] usbserial: USB Serial support registered for Qualcomm USB modem
[    3.099280] usbcore: registered new interface driver wishbone_serial
[    3.104709] usbserial: USB Serial support registered for wishbone_serial
[    3.106177] usbcore: registered new interface driver cypress_cy7c63
[    3.107387] usbcore: registered new interface driver cytherm
[    3.112781] usbcore: registered new interface driver emi26 - firmware loader
[    3.114329] ftdi_elan: driver ftdi-elan
[    3.126229] usbcore: registered new interface driver ftdi-elan
[    3.127557] usbcore: registered new interface driver legousbtower
[    3.128962] usbcore: registered new interface driver usbtest
[    3.130034] usbcore: registered new interface driver yurex
[    3.131071] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    3.133719] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.134791] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.136100] mousedev: PS/2 mouse device common for all mice
[    3.149432] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    3.152130] walkera0701: parport 0 does not exist
[    3.153356] usbcore: registered new interface driver aiptek
[    3.154403] usbcore: registered new interface driver gtco
[    3.155384] usbcore: registered new interface driver kbtab
[    3.156546] cm109: Keymap for Komunikate KIP1000 phone loaded
[    3.157713] usbcore: registered new interface driver cm109
[    3.158747] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[    3.159990] pps_ldisc: PPS line discipline registered
[    3.161134] applesmc: supported laptop not found!
[    3.162058] applesmc: driver init failed (ret=-19)!
[    3.163120] acquirewdt: WDT driver for Acquire single board computer initialising
[    3.164714] acquirewdt: I/O address 0x0043 already in use
[    3.165933] acquirewdt: probe of acquirewdt failed with error -5
[    3.167222] advantechwdt: WDT driver for Advantech single board computer initialising
[    3.169184] advantechwdt: initialized. timeout=60 sec (nowayout=1)
[    3.170569] sc1200wdt: build 20020303
[    3.171492] sc1200wdt: io parameter must be specified
[    3.172674] pc87413_wdt: Version 1.1 at io 0x2E
[    3.173765] pc87413_wdt: cannot register miscdev on minor=130 (err=-16)
[    3.175164] sbc7240_wdt: I/O address 0x0443 already in use
[    3.176493] w83877f_wdt: I/O address 0x0443 already in use
[    3.177779] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    3.178893] wbsd: Copyright(c) Pierre Ossman
[    3.179778] usbcore: registered new interface driver ushc
[    3.190201] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    3.193075] panel: driver version 0.9.5 not yet registered
[    3.194402] dgap: dgap-1.3-16, Digi International Part Number 40002347_C
[    3.195859] dgap: For the tools package please visit http://www.digi.com
[    3.197701] hdaps: supported laptop not found!
[    3.198785] hdaps: driver init failed (ret=-19)!
[    3.208978] mce: Unable to init device /dev/mcelog (rc: -5)
[    3.204016] ... APIC ID:      00000000 (0)
[    3.204016] ... APIC VERSION: 01050014
[    3.204016] 0000000000000000000000000000000000000000000000000000000000000000
[    3.204016] 0000000002000000000000000000000000000000000000000000000000000000
[    3.204016] 0000000000000000000000000000000000000000000000000000000000008000
[    3.204016] 
[    3.219393] number of MP IRQ sources: 15.
[    3.220394] number of IO-APIC #0 registers: 24.
[    3.221518] testing the IO APIC.......................
[    3.240294] IO APIC #0......
[    3.241113] .... register #00: 00000000
[    3.242047] .......    : physical APIC id: 00
[    3.243079] .......    : Delivery Type: 0
[    3.244122] .......    : LTS          : 0
[    3.245115] .... register #01: 00170011
[    3.245934] .......     : max redirection entries: 17
[    3.246896] .......     : PRQ implemented: 0
[    3.247908] .......     : IO APIC version: 11
[    3.249002] .... register #02: 00000000
[    3.249950] .......     : arbitration: 00
[    3.250915] .... IRQ redirection table:
[    3.251711] IOAPIC 0:
[    3.252353]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.253936]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(03), M(1)
[    3.255828]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[    3.257613]  pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.259168]  pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.260960]  pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.262806]  pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.264439]  pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.266008]  pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.267866]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(03), M(1)
[    3.269617]  pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.271157]  pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.272954]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(03), M(1)
[    3.274815]  pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.276418]  pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.277972]  pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.279516]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.281389]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.283216]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.284796]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.286430]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.288248]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.290039]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.291897]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    3.293791] IRQ to pin mappings:
[    3.294647] IRQ0 -> 0:2
[    3.295457] IRQ1 -> 0:1
[    3.296261] IRQ3 -> 0:3
[    3.297153] IRQ4 -> 0:4
[    3.298061] IRQ5 -> 0:5
[    3.298914] IRQ6 -> 0:6
[    3.299758] IRQ7 -> 0:7
[    3.300674] IRQ8 -> 0:8
[    3.301565] IRQ9 -> 0:9
[    3.302488] IRQ10 -> 0:10
[    3.303432] IRQ11 -> 0:11
[    3.308449] IRQ12 -> 0:12
[    3.309381] IRQ13 -> 0:13
[    3.310287] IRQ14 -> 0:14
[    3.311168] IRQ15 -> 0:15
[    3.316134] .................................... done.
[    3.317275] Using IPI No-Shortcut mode
[    3.320262] Loading compiled-in X.509 certificates
[    3.328887] Loaded X.509 cert 'Build time autogenerated kernel key: 9b610b21abd44b4385ecfef19b2bac635e2fc132'
[    3.345466] Btrfs loaded, debug=on, assert=on
[    3.346586] BTRFS: selftest: Running btrfs free space cache tests
[    3.347936] BTRFS: selftest: Running extent only tests
[    3.349148] BTRFS: selftest: Running bitmap only tests
[    3.350334] BTRFS: selftest: Running bitmap and extent tests
[    3.351608] BTRFS: selftest: Running space stealing from bitmap to extent
[    3.353444] BTRFS: selftest: Free space cache tests finished
[    3.363779] BTRFS: selftest: Running extent buffer operation tests
[    3.364891] BTRFS: selftest: Running btrfs_split_item tests
[    3.366427] BTRFS: selftest: Running find delalloc tests
[    3.487093] BTRFS: selftest: Running btrfs_get_extent tests
[    3.492500] BTRFS: selftest: Running hole first btrfs_get_extent test
[    3.493866] BTRFS: selftest: Running outstanding_extents tests
[    3.495136] BTRFS: selftest: Running qgroup tests
[    3.500296] BTRFS: selftest: Qgroup basic add
[    3.501401] BUG: unable to handle kernel NULL pointer dereference at 00000018
[    3.503142] IP: [<c1245b49>] btrfs_root_node+0x19/0x70
[    3.504285] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    3.504285] Oops: 0000 [#1] SMP 
[    3.504285] Modules linked in:
[    3.504285] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc5-00049-g02507c9 #115
[    3.504285] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    3.504285] task: d2c40000 ti: d2c48000 task.ti: d2c48000
[    3.504285] EIP: 0060:[<c1245b49>] EFLAGS: 00010282 CPU: 0
[    3.504285] EIP is at btrfs_root_node+0x19/0x70
[    3.504285] EAX: d2c10400 EBX: d2c10400 ECX: 00000000 EDX: 00000000
[    3.504285] ESI: d2b400c0 EDI: d2a49000 EBP: d2c49ca8 ESP: d2c49c9c
[    3.504285]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    3.504285] CR0: 8005003b CR2: 00000018 CR3: 017e0000 CR4: 000006b0
[    3.504285] Stack:
[    3.504285]  d2c10400 d2b400c0 d2a49000 d2c49cc0 c1246a55 00000000 00000000 00000002
[    3.504285]  d2b400c0 d2c49d60 c12d03c0 00000001 ffffffff 00000000 00000000 00b400c0
[    3.504285]  00000010 d2c1c000 d2c1c000 ffffffff ffffffff 00000000 00000000 00000000
[    3.504285] Call Trace:
[    3.504285]  [<c1246a55>] btrfs_old_root_level+0x15/0x80
[    3.504285]  [<c12d03c0>] __resolve_indirect_refs+0x3c0/0x750
[    3.504285]  [<c12d16d0>] find_parent_nodes+0x360/0x6f0
[    3.504285]  [<c12d1afd>] __btrfs_find_all_roots+0x9d/0x100
[    3.504285]  [<c12d1ba1>] btrfs_find_all_roots+0x21/0x70
[    3.504285]  [<c12eb033>] test_no_shared_qgroup+0xd3/0x2f0
[    3.504285]  [<c1769eda>] ? init_befs_fs+0x7c/0x7c
[    3.504285]  [<c12eb3a1>] btrfs_test_qgroups+0x151/0x1c0
[    3.504285]  [<c1769fde>] init_btrfs_fs+0x104/0x169
[    3.504285]  [<c1000416>] do_one_initcall+0x76/0x170
[    3.504285]  [<c174e4d2>] ? repair_env_string+0x12/0x54
[    3.504285]  [<c105c30d>] ? parse_args+0x24d/0x3e0
[    3.504285]  [<c174eb75>] ? kernel_init_freeable+0xcd/0x16f
[    3.504285]  [<c174eb95>] kernel_init_freeable+0xed/0x16f
[    3.504285]  [<c153cfa8>] kernel_init+0x8/0xc0
[    3.504285]  [<c1547181>] ret_from_kernel_thread+0x21/0x30
[    3.504285]  [<c153cfa0>] ? rest_init+0x80/0x80
[    3.504285] Code: ff a1 2c b9 81 c1 89 da e8 f5 b5 ea ff 5b 5d f3 c3 90 55 89 e5 57 56 53 89 c3 90 8d b4 26 00 00 00 00 64 ff 05 00 f7 7c c1 8b 13 <8b> 4a 18 85 c9 74 40 8d 71 01 8d 7a 18 89 c8 f0 0f b1 72 18 39
[    3.504285] EIP: [<c1245b49>] btrfs_root_node+0x19/0x70 SS:ESP 0068:d2c49c9c
[    3.504285] CR2: 0000000000000018
[    3.504285] ---[ end trace 9f3e572417cf4b6e ]---
[    3.504285] Kernel panic - not syncing: Fatal exception
[    3.504285] Kernel Offset: disabled

Elapsed time: 20
qemu-system-i386 -enable-kvm -kernel /pkg/linux/i386-randconfig-s0-201544/gcc-5/02507c91c8944d71dae65bddc45b764be65069f8/vmlinuz-4.2.0-rc5-00049-g02507c9 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-i386-44/bisect_boot-1-yocto-minimal-i386.cgz-i386-randconfig-s0-201544-02507c91c8944d71dae65bddc45b764be65069f8-20151106-77560-6wi3gc-0.yaml ARCH=i386 kconfig=i386-randconfig-s0-201544 branch=linux-devel/devel-catchup-201511060708 commit=02507c91c8944d71dae65bddc45b764be65069f8 BOOT_IMAGE=/pkg/linux/i386-randconfig-s0-201544/gcc-5/02507c91c8944d71dae65bddc45b764be65069f8/vmlinuz-4.2.0-rc5-00049-g02507c9 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-i386/yocto-minimal-i386.cgz/i386-randconfig-s0-201544/gcc-5/02507c91c8944d71dae65bddc45b764be65069f8/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-kbuild-yocto-i386-44::dhcp drbd.minor_count=8'  -initrd /fs/sda1/initrd-vm-kbuild-yocto-i386-44 -m 320 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sda1/disk0-vm-kbuild-yocto-i386-44,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-kbuild-yocto-i386-44 -serial file:/dev/shm/kboot/serial-vm-kbuild-yocto-i386-44 -daemonize -display none -monitor null 
