early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel
input_data: 0x0197a062
input_len: 0x00c0d88a
output: 0x01000000
output_len: 0x01575778
run_size: 0x01ed5228

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[    0.000000] Linux version 4.6.0-rc1-00194-g29405a1 (kbuild@lkp-nex06) (gcc version 5.3.1 20160316 (Debian 5.3.1-12) ) #1 Wed Apr 6 10:01:08 CST 2016
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000bfdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000bfe0000-0x000000000bffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xbfe0 max_arch_pfn = 0x100000
[    0.000000] MTRR: Disabled
[    0.000000] initial memory mapped: [mem 0x00000000-0x02ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x02dbc000, 0x02dbcfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x0bbbb000-0x0bfdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6460 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000000BFE16EE 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000000BFE0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000000BFE0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000000BFE0000 000040
[    0.000000] ACPI: SSDT 0x000000000BFE0C88 0009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x000000000BFE163E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000000BFE16B6 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 191MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 0bfe0000
[    0.000000]   low ram: 0 - 0bfe0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:bbba001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 2733660946 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] BRK [0x02dbd000, 0x02dbdfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000bfdffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000bfdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000bfdffff]
[    0.000000] On node 0 totalpages: 49022
[    0.000000] free_area_init_node: node 0, pgdat c248a100, node_mem_map cba0a024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 396 pages used for memmap
[    0.000000]   Normal zone: 45024 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 23d6080
[    0.000000] e820: [mem 0x0c000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 48590
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-openwrt-i386-15/bisect_boot-1-openwrt-i386.cgz-i386-randconfig-sb0-04060654-29405a159bb1653c5a7c55f86f27418714989322-20160406-96797-1rryijw-0.yaml ARCH=i386 kconfig=i386-randconfig-sb0-04060654 branch=linux-devel/devel-spot-201604060629 commit=29405a159bb1653c5a7c55f86f27418714989322 BOOT_IMAGE=/pkg/linux/i386-randconfig-sb0-04060654/gcc-5/29405a159bb1653c5a7c55f86f27418714989322/vmlinuz-4.6.0-rc1-00194-g29405a1 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-openwrt-i386/openwrt-i386.cgz/i386-randconfig-sb0-04060654/gcc-5/29405a159bb1653c5a7c55f86f27418714989322/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-lkp-wsx03-openwrt-i386-15::dhcp drbd.minor_count=8
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 200572 bytes of page_ext
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 159128K/196088K available (15362K kernel code, 852K rwdata, 4852K rodata, 888K init, 8424K bss, 36960K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa2000 - 0xfffff000   ( 372 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xcc7e0000 - 0xff7fe000   ( 816 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xcbfe0000   ( 191 MB)
[    0.000000]       .init : 0xc2497000 - 0xc2575000   ( 888 kB)
[    0.000000]       .data : 0xc1f00f13 - 0xc24951c0   (5712 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1f00f13   (15363 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=cb406000 soft=cb408000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Linux version 4.6.0-rc1-00194-g29405a1 (kbuild@lkp-nex06) (gcc version 5.3.1 20160316 (Debian 5.3.1-12) ) #1 Wed Apr 6 10:01:08 CST 2016
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000bfdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000bfe0000-0x000000000bffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xbfe0 max_arch_pfn = 0x100000
[    0.000000] MTRR: Disabled
[    0.000000] initial memory mapped: [mem 0x00000000-0x02ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x02dbc000, 0x02dbcfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x0bbbb000-0x0bfdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6460 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000000BFE16EE 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000000BFE0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000000BFE0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000000BFE0000 000040
[    0.000000] ACPI: SSDT 0x000000000BFE0C88 0009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x000000000BFE163E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000000BFE16B6 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 191MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 0bfe0000
[    0.000000]   low ram: 0 - 0bfe0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:bbba001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 2733660946 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] BRK [0x02dbd000, 0x02dbdfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000bfdffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000bfdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000bfdffff]
[    0.000000] On node 0 totalpages: 49022
[    0.000000] free_area_init_node: node 0, pgdat c248a100, node_mem_map cba0a024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 396 pages used for memmap
[    0.000000]   Normal zone: 45024 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 23d6080
[    0.000000] e820: [mem 0x0c000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 48590
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-openwrt-i386-15/bisect_boot-1-openwrt-i386.cgz-i386-randconfig-sb0-04060654-29405a159bb1653c5a7c55f86f27418714989322-20160406-96797-1rryijw-0.yaml ARCH=i386 kconfig=i386-randconfig-sb0-04060654 branch=linux-devel/devel-spot-201604060629 commit=29405a159bb1653c5a7c55f86f27418714989322 BOOT_IMAGE=/pkg/linux/i386-randconfig-sb0-04060654/gcc-5/29405a159bb1653c5a7c55f86f27418714989322/vmlinuz-4.6.0-rc1-00194-g29405a1 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-openwrt-i386/openwrt-i386.cgz/i386-randconfig-sb0-04060654/gcc-5/29405a159bb1653c5a7c55f86f27418714989322/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-lkp-wsx03-openwrt-i386-15::dhcp drbd.minor_count=8
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 200572 bytes of page_ext
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 159128K/196088K available (15362K kernel code, 852K rwdata, 4852K rodata, 888K init, 8424K bss, 36960K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa2000 - 0xfffff000   ( 372 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xcc7e0000 - 0xff7fe000   ( 816 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xcbfe0000   ( 191 MB)
[    0.000000]       .init : 0xc2497000 - 0xc2575000   ( 888 kB)
[    0.000000]       .data : 0xc1f00f13 - 0xc24951c0   (5712 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1f00f13   (15363 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=cb406000 soft=cb408000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2260.998 MHz processor
[    0.174954] Calibrating delay loop (skipped) preset value.. 4521.99 BogoMIPS (lpj=2260998)
[    0.177287] pid_max: default: 32768 minimum: 301
[    0.178479] ACPI: Core revision 20160108
[    0.181982] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.183420] 
[    0.184207] Security Framework initialized
[    0.185262] SELinux:  Initializing.
[    0.186273] SELinux:  Starting in permissive mode
[    0.187416] AppArmor: AppArmor disabled by boot time parameter
[    0.188758] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.190156] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.191883] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.193133] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.194427] CPU: Intel QEMU Virtual CPU version 2.4.0 (family: 0x6, model: 0x6, stepping: 0x3)
[    0.213947] Performance Events: Broken PMU hardware detected, using software events only.
[    0.225684] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.227007] enabled ExtINT on CPU#0
[    0.228831] ENABLING IO-APIC IRQs
[    0.229825] init IO_APIC IRQs
[    0.230783]  apic 0 pin 0 not connected
[    0.231858] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.233896] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.235996] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.238055] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.240110] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.242201] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.244282] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.246370] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.248462] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.250476] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.252587] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.254678] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.256786] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.258888] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.261000] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.263088]  apic 0 pin 16 not connected
[    0.264127]  apic 0 pin 17 not connected
[    0.265156]  apic 0 pin 18 not connected
[    0.266183]  apic 0 pin 19 not connected
[    0.267254]  apic 0 pin 20 not connected
[    0.268322]  apic 0 pin 21 not connected
[    0.269391]  apic 0 pin 22 not connected
[    0.270455]  apic 0 pin 23 not connected
[    0.271666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.272971] Using local APIC timer interrupts.
[    0.272971] calibrating APIC timer ...
[    0.376690] ... lapic delta = 6210188
[    0.377807] ... PM-Timer delta = 355680
[    0.378852] ... PM-Timer result ok
[    0.379836] ..... delta 6210188
[    0.380775] ..... mult: 266725543
[    0.381759] ..... calibration result: 993630
[    0.382842] ..... CPU clock speed is 2246.0625 MHz.
[    0.384006] ..... host bus clock speed is 993.0630 MHz.
[    0.385643] devtmpfs: initialized
[    0.389789] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.392134] xor: measuring software checksum speed
[    0.403210]    pIII_sse  : 10460.000 MB/sec
[    0.414133]    prefetch64-sse: 12188.000 MB/sec
[    0.415284] xor: using function: prefetch64-sse (12188.000 MB/sec)
[    0.416587] prandom: seed boundary self test passed
[    0.418505] prandom: 100 self tests passed
[    0.419568] atomic64_test: passed for i386+ platform with CX8 and with SSE
[    0.421079] regulator-dummy: no parameters
[    0.422311] NET: Registered protocol family 16
[    0.425082] cpuidle: using governor ladder
[    0.427615] ACPI: bus type PCI registered
[    0.428717] PCI: Using configuration type 1 for base access
[    0.437489] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.455879] raid6: mmxx1    gen()  3296 MB/s
[    0.473762] raid6: mmxx2    gen()  3847 MB/s
[    0.491635] raid6: sse1x1   gen()  2867 MB/s
[    0.509517] raid6: sse1x2   gen()  3378 MB/s
[    0.527406] raid6: sse2x1   gen()  5738 MB/s
[    0.545287] raid6: sse2x1   xor()  4626 MB/s
[    0.563181] raid6: sse2x2   gen()  6578 MB/s
[    0.581065] raid6: sse2x2   xor()  5412 MB/s
[    0.582163] raid6: using algorithm sse2x2 gen() 6578 MB/s
[    0.583353] raid6: .... xor() 5412 MB/s, rmw enabled
[    0.584484] raid6: using intx1 recovery algorithm
[    0.585761] ACPI: Added _OSI(Module Device)
[    0.586818] ACPI: Added _OSI(Processor Device)
[    0.587884] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.588985] ACPI: Added _OSI(Processor Aggregator Device)
[    0.591454] ACPI: Interpreter enabled
[    0.592462] ACPI: (supports S0 S5)
[    0.593411] ACPI: Using IOAPIC for interrupt routing
[    0.594568] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.600248] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.601566] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[    0.602814] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.604525] PCI host bridge to bus 0000:00
[    0.605575] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.606947] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.608322] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.610237] pci_bus 0000:00: root bus resource [mem 0x0c000000-0xfebfffff window]
[    0.612175] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.613412] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.615070] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.616788] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.626298] pci 0000:00:01.1: reg 0x20: [io  0xc0c0-0xc0cf]
[    0.631157] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.632707] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.634026] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.635556] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.637238] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.638854] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.641251] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.643074] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.647454] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.654884] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.668743] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.670469] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.674730] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.677862] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.690383] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.692008] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.695273] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.699250] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.712737] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[    0.716121] pci 0000:00:05.0: reg 0x10: [io  0xc080-0xc0bf]
[    0.720754] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff]
[    0.735337] pci 0000:00:06.0: [8086:25ab] type 00 class 0x088000
[    0.737565] pci 0000:00:06.0: reg 0x10: [mem 0xfebf3000-0xfebf300f]
[    0.746504] pci_bus 0000:00: on NUMA node 0
[    0.748138] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.749856] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.751644] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.753362] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.754952] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.756599] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.758124] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.759328] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.761321] vgaarb: loaded
[    0.762173] vgaarb: bridge control possible 0000:00:02.0
[    0.763633] SCSI subsystem initialized
[    0.764642] libata version 3.00 loaded.
[    0.765715] pps_core: LinuxPPS API ver. 1 registered
[    0.766860] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.768936] PTP clock support registered
[    0.770000] Unable to find dmi tokens
[    0.771019] wmi: Mapper loaded
[    0.772016] PCI: Using ACPI for IRQ routing
[    0.773063] PCI: pci_cache_line_size set to 32 bytes
[    0.774298] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.775532] e820: reserve RAM buffer [mem 0x0bfe0000-0x0bffffff]
[    0.776936] NET: Registered protocol family 23
[    0.778024] Bluetooth: Core ver 2.21
[    0.778986] NET: Registered protocol family 31
[    0.780052] Bluetooth: HCI device and connection manager initialized
[    0.781351] Bluetooth: HCI socket layer initialized
[    0.782468] Bluetooth: L2CAP socket layer initialized
[    0.795927] Bluetooth: SCO socket layer initialized
[    0.797051] NET: Registered protocol family 8
[    0.798100] NET: Registered protocol family 20
[    0.799223] nfc: nfc_init: NFC Core ver 0.1
[    0.800266] NET: Registered protocol family 39
[    0.802912] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.804313] clocksource: Switched to clocksource kvm-clock
[    0.805534] VFS: Disk quotas dquot_6.6.0
[    0.806549] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.807954] FS-Cache: Loaded
[    0.808889] CacheFiles: Loaded
[    0.809836] pnp: PnP ACPI init
[    0.810784] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.812167] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.813522] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.814880] pnp 00:03: [dma 2]
[    0.815810] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.817200] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.818587] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.820246] pnp: PnP ACPI: found 6 devices
[    0.857044] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.859182] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.860457] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.861731] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.863094] pci_bus 0000:00: resource 7 [mem 0x0c000000-0xfebfffff window]
[    0.864476] NET: Registered protocol family 2
[    0.865703] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.867076] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.868365] TCP: Hash tables configured (established 2048 bind 2048)
[    0.869668] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.870895] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.872232] NET: Registered protocol family 1
[    0.873301] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.874552] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.875776] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.877086] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.879106] PCI: CLS 0 bytes, default 32
[    0.880164] Trying to unpack rootfs image as initramfs...
[    1.047586] Freeing initrd memory: 4244K (cbbbb000 - cbfe0000)
[    1.050658] PCLMULQDQ-NI instructions are not detected.
[    1.051864] The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
[    1.054120] futex hash table entries: 256 (order: -1, 3072 bytes)
[    1.055393] audit: initializing netlink subsys (disabled)
[    1.056592] audit: type=2000 audit(1459908089.502:1): initialized
[    1.057905] Initialise system trusted keyring
[    1.059005] workingset: timestamp_bits=12 max_order=16 bucket_order=4
[    1.060325] zbud: loaded
[    1.061312] DLM installed
[    1.062231] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.063585] efs: 1.0a - http://aeschi.ch.eu.org/efs/
[    1.064727] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.065845] QNX4 filesystem 0.2.3 registered.
[    1.067021] JFS: nTxBlock = 1276, nTxLock = 10210
[    1.069052] NILFS version 2 loaded
[    1.069999] befs: version: 0.9.3
[    1.070977] ocfs2: Registered cluster interface user
[    1.072143] OCFS2 User DLM kernel interface loaded
[    1.073374] SELinux:  Registering netfilter hooks
[    1.075621] NET: Registered protocol family 38
[    1.076709] async_tx: api initialized (async)
[    1.077779] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.079668] io scheduler noop registered (default)
[    1.080780] io scheduler deadline registered
[    1.081838] io scheduler cfq registered
[    1.084506] test_hexdump: all 1184 tests passed
[    1.085588] Running rhashtable test nelem=8, max_size=0, shrinking=0
[    1.086883] Test 00:
[    1.089544]   Adding 50000 keys
[    1.098049]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.108910]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.110917]   Deleting 50000 keys
[    1.116604]   Duration of test: 26130541 ns
[    1.117665] Test 01:
[    1.119180]   Adding 50000 keys
[    1.127645]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.138609]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.140612]   Deleting 50000 keys
[    1.146295]   Duration of test: 26200328 ns
[    1.147353] Test 02:
[    1.149327]   Adding 50000 keys
[    1.157805]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.168689]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.170701]   Deleting 50000 keys
[    1.176383]   Duration of test: 26127400 ns
[    1.177440] Test 03:
[    1.178833]   Adding 50000 keys
[    1.187238]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.198098]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.200087]   Deleting 50000 keys
[    1.205717]   Duration of test: 25969425 ns
[    1.206759] Average test time: 26106923
[    1.207741] Testing concurrent rhashtable access from 10 threads
[    1.742689] Started 10 threads, 0 failed
[    1.744063] test_printf: all 260 tests passed
[    1.833365] test_bitmap: all 460506 tests passed
[    1.835980] crc32: CRC_LE_BITS = 8, CRC_BE BITS = 8
[    1.837105] crc32: self tests passed, processed 225944 bytes in 725721 nsec
[    1.839130] crc32c: CRC_LE_BITS = 8
[    1.840069] crc32c: self tests passed, processed 225944 bytes in 341534 nsec
[    1.895190] crc32_combine: 8373 self tests passed
[    1.949833] crc32c_combine: 8373 self tests passed
[    1.951077] 104-dio-48e 104-dio-48e: Unable to lock port addresses (0x0-0x10)
[    1.952466] 104-dio-48e: probe of 104-dio-48e failed with error -16
[    1.953776] 104-idi-48 104-idi-48: Unable to lock port addresses (0x0-0x8)
[    1.955138] 104-idi-48: probe of 104-idi-48 failed with error -16
[    1.956502] gpio_it87: no device
[    1.957533] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.958833] cr_bllcd: INTEL CARILLO RANCH LPC not found.
[    1.960001] cr_bllcd: Carillo Ranch Backlight Driver Initialized.
[    1.961463] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[    1.962847] vmlfb: initializing
[    1.963770] Could not find Carillo Ranch MCH device.
[    1.964969] hgafb: HGA card not detected.
[    1.965978] hgafb: probe of hgafb.0 failed with error -22
[    1.967380] uvesafb: failed to execute /sbin/v86d
[    1.968476] uvesafb: make sure that the v86d helper is installed and executable
[    1.970350] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[    1.971675] uvesafb: vbe_init() failed with -22
[    1.972754] uvesafb: probe of uvesafb.0 failed with error -22
[    1.973976] intel_idle: does not run on family 6 model 6
[    1.975212] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.977093] ACPI: Power Button [PWRF]
[    2.021314] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    2.022574] virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
[    2.067292] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    2.068548] tsc: Refined TSC clocksource calibration: 2260.995 MHz
[    2.068552] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x209746ac25a, max_idle_ns: 440795298337 ns
[    2.072081] virtio-pci 0000:00:05.0: virtio_pci: leaving for legacy driver
[    2.073969] HDLC line discipline maxframe=4096
[    2.075046] N_HDLC line discipline registered.
[    2.076115] r3964: Philips r3964 Driver $Revision: 1.10 $
[    2.077306] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.103888] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.106262] MOXA Smartio/Industio family driver version 2.0.5
[    2.107512] Initializing Nozomi driver 2.1d
[    2.108578] SyncLink GT
[    2.109425] SyncLink GT, tty major#241
[    2.110430] SyncLink GT no devices found
[    2.111461] SyncLink MultiPort driver $Revision: 4.38 $
[    2.114405] SyncLink MultiPort driver $Revision: 4.38 $, tty major#240
[    2.115738] SyncLink serial driver $Revision: 4.38 $
[    2.118674] SyncLink serial driver $Revision: 4.38 $, tty major#239
[    2.120018] lp: driver loaded but no devices found
[    2.121162] sonypi: Sony Programmable I/O Controller Driver v1.26.
[    2.122508] ppdev: user-space parallel port driver
[    2.123670] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[    2.125785] platform pc8736x_gpio.0: no device found
[    2.127737] nsc_gpio initializing
[    2.129347] SyncLink PC Card driver $Revision: 4.34 $, tty major#238
[    2.131531] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    2.135342] parport_pc 00:04: reported by Plug and Play ACPI
[    2.137026] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    2.221756] lp0: using parport0 (interrupt-driven).
[    2.223600] lp0: console ready
[    2.225533] Failed to find cpu0 device node
[    2.227187] Unable to detect cache hierarchy from DT for CPU 0
[    2.231334] brd: module loaded
[    2.232658] HP CISS Driver (v 3.6.26)
[    2.233937] nbd: registered device at major 43
[    2.240577] drbd: failed to initialize debugfs -- will not be available
[    2.242671] drbd: initialized. Version: 8.4.6 (api:1/proto:86-101)
[    2.244630] drbd: built-in
[    2.245944] drbd: registered as block device major 147
[    2.266312] mtip32xx Version 1.3.1
[    2.267737] Error creating debugfs parent
[    2.269884] null: module loaded
[    2.271358] dummy-irq: no IRQ given.  Use irq=N
[    2.273142] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[    2.276057] c2port c2port0: C2 port uc added
[    2.277646] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[    2.280694] Guest personality initialized and is inactive
[    2.282597] VMCI host device registered (name=vmci, major=10, minor=56)
[    2.284634] Initialized host personality
[    2.381226] panel: driver version 0.9.5 registered on parport0 (io=0x378).
[    2.383862] NCI uart driver 'nfcmrvl_uart [0]' registered
[    2.385723] Uniform Multi-Platform E-IDE driver
[    2.387550] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[    2.389653] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[    2.392882]     ide0: BM-DMA at 0xc0c0-0xc0c7
[    2.394503]     ide1: BM-DMA at 0xc0c8-0xc0cf
[    2.396087] Probing IDE interface ide0...
[    2.913148] Probing IDE interface ide1...
[    3.586890] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[    4.198901] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[    4.201107] hdc: MWDMA2 mode selected
[    4.202896] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    4.204782] ide1 at 0x170-0x177,0x376 on irq 15
[    4.207505] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    4.210961] ide-gd driver 1.18
[    4.212429] ide-cd driver 5.00
[    4.214154] ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache
[    4.216461] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.219821] Loading iSCSI transport class v2.0-870.
[    4.221915] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[    4.223827] Detecting Adaptec I2O RAID controllers...
[    4.225719] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[    4.227851] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.33-k.
[    4.231012] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0
[    4.233289] megasas: 06.810.09.00-rc1
[    4.234857] mpt3sas version 12.100.00.00 loaded
[    4.236667] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    4.238718] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    4.240944] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    4.244002] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    4.247088] ppa: Version 2.07 (for Linux 2.4.x)
[    7.248244] ppa0: failed to claim parport because a pardevice is owning the port for too long time!
[    7.251645] imm: Version 2.05 (for Linux 2.4.0)
[   10.247974] imm0: failed to claim parport because a pardevice is owning the port for too long time!
[   10.252141] stex: Promise SuperTrak EX Driver version: 5.00.0000.01
[   10.254638] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015)
[   10.258640] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[   10.262296] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[   10.264946] Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015)
[   10.267343] iscsi: registered transport (cxgb3i)
[   10.269392] Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015)
[   10.271827] iscsi: registered transport (cxgb4i)
[   10.273882] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
[   10.276547] iscsi: registered transport (bnx2i)
[   10.278764] esas2r: driver will not be loaded because no ATTO esas2r devices were found
[   10.282564] VMware PVSCSI driver - version 1.0.6.0-k
[   10.284799] osd: LOADED open-osd 0.2.1
[   10.291185] scsi_debug:sdebug_driver_probe: host protection
[   10.293482] scsi host0: scsi_debug, version 1.85 [20141022], dev_size_mb=8, opts=0x0
[   10.297310] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0184 PQ: 0 ANSI: 6
[   10.301507] Rounding down aligned max_sectors from 4294967295 to 4294967288
[   10.304835] libphy: Fixed MDIO Bus: probed
[   10.306794] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB)
[   10.310363] sd 0:0:0:0: [sda] Write Protect is off
[   10.310367] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
[   10.314696] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   10.318955] Atheros(R) L2 Ethernet Driver - version 2.2.3
[   10.321207] Copyright (c) 2007 Atheros Corporation.
[   10.323545] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[   10.325947] cxgb4vf: could not create debugfs entry, continuing
[   10.328332] enic: Cisco VIC Ethernet NIC Driver, ver 2.3.0.20
[   10.330721] vxge: Copyright(c) 2002-2010 Exar Corp.
[   10.332863] vxge: Driver version: 2.5.3.22640-k
[   10.334912] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[   10.337311] e100: Copyright(c) 1999-2006 Intel Corporation
[   10.339594] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   10.341200] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   10.350299] sd 0:0:0:0: [sda] Attached SCSI disk
[   10.388537] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[   10.712091] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[   10.713550] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[   10.714958] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   10.716223] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   10.717563] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[   10.718975] igb: Copyright (c) 2007-2014 Intel Corporation.
[   10.720243] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[   10.722586] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[   10.724435] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[   10.727154] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[   10.729228] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
[   10.731582] ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation.
[   10.733122] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.4.25-k
[   10.735122] i40e: Copyright (c) 2013 - 2014 Intel Corporation.
[   10.736518] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[   10.737935] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[   10.739226] i40evf: Intel(R) 40-10 Gigabit Virtual Function Network Driver - version 1.4.15-k
[   10.741298] Copyright (c) 2013 - 2015 Intel Corporation.
[   10.742534] jme: JMicron JMC2XX ethernet driver version 1.0.8
[   10.743891] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[   10.745422] Solarflare NET driver v4.0
[   10.746510] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[   10.747776] tehuti: Options: hw_csum 
[   10.748898] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
[   10.750308] SLIP linefill/keepalive option.
[   10.751375] hdlc: HDLC support module revision 1.22
[   10.752505] x25_asy: X.25 async: version 0.00 ALPHA (dynamic channels, max=256)
[   10.754409] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org.
[   10.755707] LAPB Ethernet driver version 0.02
[   10.756809] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[   10.759087] Madge ATM Horizon [Ultra] driver version 1.2.1
[   10.760293] hrz: debug bitmap is 0
[   10.761268] fore200e: FORE Systems 200E-series ATM driver - version 0.3e
[   10.762684] idt77252_init: at c24d4568
[   10.763733] adummy: version 1.0
[   10.765150] aoe: cannot create debugfs directory
[   10.766377] aoe: AoE v85 initialised.
[   10.767433] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[   10.770073] serio: i8042 KBD port at 0x60,0x64 irq 1
[   10.771226] serio: i8042 AUX port at 0x60,0x64 irq 12
[   10.772617] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0)
[   10.774814] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   10.776929] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[   10.779580] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   10.780951] evbug: Connected device: input3 (PC Speaker at isa0061/input0)
[   10.783629] wistron_btns: System unknown
[   10.784657] ideapad_slidebar: DMI does not match
[   10.785793] i2c /dev entries driver
[   10.786985] i2c-parport: adapter type unspecified
[   10.788230] pps pps0: new PPS source ktimer
[   10.789284] pps pps0: ktimer PPS source registered
[   10.790399] pps_parport: parallel port PPS client
[   10.791527] parport0: cannot grant exclusive access for device pps_parport
[   10.792904] pps_parport: couldn't register with parport0
[   10.794120] Driver for 1-wire Dallas network protocol.
[   10.795349] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[   10.797179] f71882fg: Not a Fintek device
[   10.798222] f71882fg: Not a Fintek device
[   10.799651] pc87360: PC8736x not detected, module not inserted
[   10.800937] sch56xx_common: Unsupported device id: 0xff
[   10.802132] sch56xx_common: Unsupported device id: 0xff
[   10.803520] intel_powerclamp: Intel powerclamp does not run on family 6 model 6
[   10.805536] acquirewdt: WDT driver for Acquire single board computer initialising
[   10.807509] acquirewdt: I/O address 0x0043 already in use
[   10.808708] acquirewdt: probe of acquirewdt failed with error -5
[   10.809996] advantechwdt: WDT driver for Advantech single board computer initialising
[   10.812481] advantechwdt: initialized. timeout=60 sec (nowayout=0)
[   10.813785] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[   10.814995] alim7101_wdt: ALi M7101 PMU not present - WDT not set
[   10.816331] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   10.817703] ib700wdt: WDT driver for IB700 single board computer initialising
[   10.831714] ib700wdt: START method I/O 443 is not available
[   10.832932] ib700wdt: probe of ib700wdt failed with error -5
[   10.834223] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05
[   10.835637] i6300esb: cannot register miscdev on minor=130 (err=-16)
[   10.836951] i6300ESB timer: probe of 0000:00:06.0 failed with error -16
[   10.838401] it87_wdt: no device
[   10.839341] sc1200wdt: build 20020303
[   10.840345] sc1200wdt: io parameter must be specified
[   10.841537] nv_tco: NV TCO WatchDog Timer Driver v0.01
[   10.842746] sbc60xxwdt: I/O address 0x0443 already in use
[   10.843949] sbc8360: failed to register misc device
[   10.845100] cpu5wdt: misc_register failed
[   10.846186] w83877f_wdt: I/O address 0x0443 already in use
[   10.847394] machzwd: MachZ ZF-Logic Watchdog driver initializing
[   10.848745] machzwd: no ZF-Logic found
[   10.849748] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16)
[   10.851207] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16).
[   10.853196] watchdog: Software Watchdog: a legacy watchdog module is probably present.
[   10.855261] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[   10.857637] Bluetooth: Virtual HCI driver ver 1.5
[   10.858787] Bluetooth: HCI UART driver ver 2.3
[   10.859916] Bluetooth: HCI UART protocol H4 registered
[   10.861105] Bluetooth: HCI UART protocol BCSP registered
[   10.862315] Bluetooth: HCI UART protocol BCM registered
[   10.863485] Bluetooth: HCI UART protocol AG6XX registered
[   10.864699] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[   10.865928] lguest: switcher text too large (4384)
[   10.867122] sdhci: Secure Digital Host Controller Interface driver
[   10.868420] sdhci: Copyright(c) Pierre Ossman
[   10.869588] sdhci-pltfm: SDHCI platform and OF driver helper
[   10.871261] ledtrig-cpu: registered to indicate activity on CPUs
[   10.872955] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   10.875317] hidraw: raw HID events driver (C) Jiri Kosina
[   10.877273] no options.
[   10.878264] input: Speakup as /devices/virtual/input/input5
[   10.879519] evbug: Connected device: input5 (Speakup at speakup/input0)
[   10.880937] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[   10.882296] speakup 3.1.6: initialized
[   10.883311] synth name on entry is: (null)
[   10.884397] ashmem: initialized
[   10.885461] mostcore: init()
[   10.886397] aim_cdev: init()
[   10.887313] mostcore: registered new application interfacing module cdev
[   10.888681] aim_network: most_net_init()
[   10.889717] mostcore: registered new application interfacing module networking
[   10.891792] dell_wmi_aio: No known WMI GUID found
[   10.892933] acer_wmi: Acer Laptop ACPI-WMI Extras
[   10.894069] acer_wmi: No or unsupported WMI interface, unable to load
[   10.895398] acerhdf: Acer Aspire One Fan driver, v.0.7.0
[   10.896606] acerhdf: unknown (unsupported) BIOS version QEMU/Standard PC (i440FX + PIIX, 1996)/Debian-1.8.2-1, please report, aborting!
[   10.899136] Initializing HPQ6001 module
[   10.900166] hdaps: supported laptop not found!
[   10.901258] hdaps: driver init failed (ret=-19)!
[   10.902437] fujitsu_laptop: driver 0.6.0 successfully loaded
[   10.903675] fujitsu_tablet: Unknown (using defaults)
[   10.904849] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI
[   10.906998] intel_oaktrail: Platform not recognized (You could try the module's force-parameter)
[   10.908676] cros_ec_lpc: unsupported system.
[   10.912346] pktgen: Packet Generator for packet performance testing. Version: 2.75
[   10.914369] NET: Registered protocol family 26
[   10.915470] Netfilter messages via NETLINK v0.30.
[   10.916596] nfnl_acct: registering with nfnetlink.
[   10.917735] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[   10.919161] xt_time: kernel timezone is -0000
[   10.920249] IPVS: Registered protocols (UDP, AH)
[   10.921377] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[   10.923337] IPVS: Creating netns size=1000 id=0
[   10.924475] IPVS: ipvs loaded.
[   10.925400] IPVS: [rr] scheduler registered.
[   10.926458] IPVS: [lc] scheduler registered.
[   10.927523] IPVS: [wlc] scheduler registered.
[   10.928603] IPVS: [fo] scheduler registered.
[   10.929663] IPVS: [ovf] scheduler registered.
[   10.930730] IPVS: [lblc] scheduler registered.
[   10.931842] IPVS: [lblcr] scheduler registered.
[   10.932947] IPVS: [dh] scheduler registered.
[   10.934011] IPVS: [sh] scheduler registered.
[   10.935083] IPVS: [sed] scheduler registered.
[   10.936163] IPVS: [nq] scheduler registered.
[   10.937352] NET: Registered protocol family 10
[   10.938711] mip6: Mobile IPv6
[   10.939650] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.940895] sit: IPv6 over IPv4 tunneling driver
[   10.942204] NET: Registered protocol family 15
[   10.943306] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   10.945982] Bridge firewalling registered
[   10.947061] Ebtables v2.0 registered
[   10.948126] NET: Registered protocol family 4
[   10.949221] NET: Registered protocol family 5
[   10.950311] NET: Registered protocol family 9
[   10.951415] X25: Linux Version 0.2
[   10.952577] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.953781] Bluetooth: BNEP filters: multicast
[   10.954867] Bluetooth: BNEP socket layer initialized
[   10.956051] NET: Registered protocol family 33
[   10.957143] Key type rxrpc registered
[   10.958131] Key type rxrpc_s registered
[   10.959195] NET: Registered protocol family 41
[   10.960305] lec:lane_module_init: lec.c: initialized
[   10.961493] l2tp_core: L2TP core driver, V2.0
[   10.962582] NET: Registered protocol family 35
[   10.963682] 8021q: 802.1Q VLAN Support v1.8
[   10.964893] DCCP: Activated CCID 2 (TCP-like)
[   10.966029] sctp: Hash tables configured (bind 1024/1024)
[   10.967300] tipc: Activated (version 2.0.0)
[   10.968412] NET: Registered protocol family 30
[   10.969545] tipc: Started in single node mode
[   10.970720] NET: Registered protocol family 37
[   10.971846] Key type dns_resolver registered
[   10.972956] batman_adv: B.A.T.M.A.N. advanced 2016.1 (compatibility version 15) loaded
[   10.975061] openvswitch: Open vSwitch switching datapath
[   10.976693] NET: Registered protocol family 40
[   10.977894] mpls_gso: MPLS GSO support
[   10.980532] microcode: CPU0 sig=0x663, pf=0x1, revision=0x1
[   10.981793] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   10.983976] ... APIC ID:      00000000 (0)
[   10.985013] ... APIC VERSION: 01050014
[   10.986011] 0000000000000000000000000000000000000000000000000000000000000000
[   10.988239] 0000000000000000000000000000000000000000000000000000000000000000
[   10.990195] 0000000000000000000000000000000000000000000000000000000000008000
[   10.992186] 
[   10.992898] number of MP IRQ sources: 15.
[   10.993930] number of IO-APIC #0 registers: 24.
[   10.995016] testing the IO APIC.......................
[   10.996205] IO APIC #0......
[   10.997089] .... register #00: 00000000
[   10.998086] .......    : physical APIC id: 00
[   10.999158] .......    : Delivery Type: 0
[   11.000187] .......    : LTS          : 0
[   11.001253] .... register #01: 00170011
[   11.002257] .......     : max redirection entries: 17
[   11.003409] .......     : PRQ implemented: 0
[   11.004461] .......     : IO APIC version: 11
[   11.005527] .... register #02: 00000000
[   11.006540] .......     : arbitration: 00
[   11.007561] .... IRQ redirection table:
[   11.008562] IOAPIC 0:
[   11.009387]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.011356]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[   11.013321]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[   11.015291]  pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.017246]  pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.019214]  pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.021179]  pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.023138]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(01), M(1)
[   11.025105]  pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.027081]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1)
[   11.029051]  pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.031009]  pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.033043]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[   11.035003]  pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.036961]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(01), M(1)
[   11.051375]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(01), M(1)
[   11.053356]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.055330]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.057321]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.059290]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.061330]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.063302]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.065280]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.067268]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.069232] IRQ to pin mappings:
[   11.070188] IRQ0 -> 0:2
[   11.071202] IRQ1 -> 0:1
[   11.072199] IRQ3 -> 0:3
[   11.073191] IRQ4 -> 0:4
[   11.074180] IRQ5 -> 0:5
[   11.075174] IRQ6 -> 0:6
[   11.076166] IRQ7 -> 0:7
[   11.077168] IRQ8 -> 0:8
[   11.078155] IRQ9 -> 0:9
[   11.079135] IRQ10 -> 0:10
[   11.080135] IRQ11 -> 0:11
[   11.081152] IRQ12 -> 0:12
[   11.082154] IRQ13 -> 0:13
[   11.083160] IRQ14 -> 0:14
[   11.084176] IRQ15 -> 0:15
[   11.085177] .................................... done.
[   11.086848] Using IPI Shortcut mode
[   11.087965] Loading compiled-in X.509 certificates
[   11.089248] Key type encrypted registered
[   11.090730] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[   11.092483] device-tree: Duplicate name in testcase-data, renamed to "duplicate-name#1"
[   11.094991] ### dt-test ### start of unittest - you will see error messages
[   11.096453] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[   11.098940] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[   11.101440] /testcase-data/phandle-tests/consumer-a: could not find phandle
[   11.102834] /testcase-data/phandle-tests/consumer-a: could not find phandle
[   11.104242] /testcase-data/phandle-tests/consumer-a: arguments longer than property
[   11.106189] /testcase-data/phandle-tests/consumer-a: arguments longer than property
[   11.108257] irq: no irq domain found for /testcase-data/interrupts/intc0 !
[   11.110905] overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8
[   11.113032] overlay_removal_is_ok: overlay #5 is not topmost
[   11.114277] of_overlay_destroy: removal check failed for overlay #5
[   11.116479] i2c i2c-0: Added multiplexed i2c bus 1
[   11.118016] i2c i2c-0: Added multiplexed i2c bus 2
[   11.119570] ### dt-test ### end of unittest - 149 passed, 0 failed
[   11.124090] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.125354] 8021q: adding VLAN 0 to HW filter on device eth0
[   11.126678] IP-Config: Failed to open irlan0
[   11.138313] Sending DHCP requests .
[   11.694612] input: ImExPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input4
[   11.697416] evbug: Connected device: input4 (ImExPS/2 BYD TouchPad at isa0060/serio1/input0)
[   13.118110] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   13.122273] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   14.062455] ., OK
[   14.065564] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[   14.068074] IP-Config: Complete:
[   14.069489]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[   14.071785]      host=vm-lkp-wsx03-openwrt-i386-15, domain=, nis-domain=(none)
[   14.073782]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=     nameserver0=10.0.2.3
[   14.076460] Freeing unused kernel memory: 888K (c2497000 - c2575000)
[   14.077840] Write protecting the kernel text: 15364k
[   14.079094] Write protecting the kernel read-only data: 4860k
[   14.091368] random: mktemp urandom read with 20 bits of entropy available
Please press Enter to activate this console.
[   18.956795] 8021q: adding VLAN 0 to HW filter on device eth0
[   18.962197] br-lan: port 1(eth0) entered blocking state
[   18.966433] br-lan: port 1(eth0) entered disabled state
[   18.972121] device eth0 entered promiscuous mode
[   18.981197] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   20.947679] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   20.950078] br-lan: port 1(eth0) entered blocking state
[   20.951317] br-lan: port 1(eth0) entered forwarding state
[   20.953639] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   22.739879] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:97
[   22.742217] in_atomic(): 1, irqs_disabled(): 0, pid: 854, name: odhcpd
[   22.743557] CPU: 0 PID: 854 Comm: odhcpd Not tainted 4.6.0-rc1-00194-g29405a1 #1
[   22.745471] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   22.747570]  c8e74d80 c8e74d80 cb409dc0 c13d29a1 cb409dd0 c105b8f2 c8e74d80 00000000
[   22.750436]  cb409dec c105b96c 00000000 c247c860 c7ddac00 c247d6c0 c7ddae90 cb409df8
[   22.753098]  c1efdfc7 c7d5dcc0 cb409e00 c1ccc35d cb409e80 c1d9c30e 80000000 cb409e2c
[   22.755641] Call Trace:
[   22.756495]  [<c13d29a1>] dump_stack+0x16/0x25
[   22.757642]  [<c105b8f2>] ___might_sleep+0xc2/0x110
[   22.758914]  [<c105b96c>] __might_sleep+0x2c/0x80
[   22.760163]  [<c1efdfc7>] mutex_lock+0x17/0x30
[   22.761378]  [<c1ccc35d>] rtnl_lock+0xd/0x10
[   22.762556]  [<c1d9c30e>] icmpv6_rcv+0x67e/0x7c0
[   22.763768]  [<c1d801de>] ip6_input_finish+0xee/0x3e0
[   22.764927]  [<c1cef830>] ? nf_iterate+0x50/0x90
[   22.766031]  [<c1d80a26>] ip6_input+0x76/0x80
[   22.767114]  [<c1d800f0>] ? ip6_rcv_finish+0xa0/0xa0
[   22.768260]  [<c1d8007c>] ip6_rcv_finish+0x2c/0xa0
[   22.769405]  [<c1d80877>] ipv6_rcv+0x3a7/0x4e0
[   22.770611]  [<c1d80050>] ? ip6_make_skb+0x180/0x180
[   22.771910]  [<c1cb793c>] __netif_receive_skb_core+0x34c/0x7a0
[   22.773321]  [<c1073957>] ? internal_add_timer+0x27/0x60
[   22.774644]  [<c1059f2f>] ? wake_up_process+0xf/0x20
[   22.775861]  [<c104f2d1>] ? insert_work+0x61/0xa0
[   22.776977]  [<c1073957>] ? internal_add_timer+0x27/0x60
[   22.778172]  [<c1cb7da6>] __netif_receive_skb+0x16/0x60
[   22.779346]  [<c1cb82d9>] process_backlog+0x69/0xd0
[   22.780491]  [<c1cbba6a>] net_rx_action+0x18a/0x270
[   22.781713]  [<c1041880>] __do_softirq+0xb0/0x1a0
[   22.782938]  [<c10417d0>] ? __local_bh_enable_ip+0x80/0x80
[   22.784217]  [<c101607e>] do_softirq_own_stack+0x1e/0x30
[   22.785406]  <IRQ>  [<c10416f5>] do_softirq+0x35/0x40
[   22.786721]  [<c10417c6>] __local_bh_enable_ip+0x76/0x80
[   22.787910]  [<c1d7ca65>] ip6_finish_output2+0x185/0x510
[   22.789111]  [<c135e092>] ? selinux_ipv6_postroute+0x12/0x20
[   22.790493]  [<c1cef842>] ? nf_iterate+0x62/0x90
[   22.791729]  [<c1d7f48a>] ip6_finish_output+0x9a/0xf0
[   22.793030]  [<c1d7f48a>] ? ip6_finish_output+0x9a/0xf0
[   22.794345]  [<c1d7f56b>] ip6_output+0x8b/0x100
[   22.795561]  [<c1d7f3f0>] ? ip6_fragment+0xaa0/0xaa0
[   22.796712]  [<c1dba4ee>] ip6_local_out+0x2e/0x40
[   22.797833]  [<c1d7fda7>] ip6_send_skb+0x17/0xa0
[   22.798949]  [<c1d7fe6e>] ip6_push_pending_frames+0x3e/0x60
[   22.800196]  [<c1d9a7df>] rawv6_sendmsg+0xb4f/0xd50
[   22.801354]  [<c105b96c>] ? __might_sleep+0x2c/0x80
[   22.802649]  [<c105b96c>] ? __might_sleep+0x2c/0x80
[   22.803920]  [<c13df5a2>] ? _copy_from_user+0x52/0x60
[   22.805224]  [<c1d4edd0>] inet_sendmsg+0x20/0x60
[   22.806475]  [<c1ca4e2d>] sock_sendmsg+0x2d/0x40
[   22.807682]  [<c1ca5259>] ___sys_sendmsg+0x239/0x250
[   22.808830]  [<c1ca46f0>] ? ___sys_recvmsg+0xc0/0x140
[   22.809990]  [<c1ca4728>] ? ___sys_recvmsg+0xf8/0x140
[   22.811176]  [<c1ca4000>] ? init_once+0x10/0x10
[   22.812282]  [<c1ca4031>] ? sock_recvmsg+0x31/0x40
[   22.813456]  [<c135baab>] ? cred_has_capability+0x4b/0xd0
[   22.814794]  [<c1ca4820>] ? SYSC_bind+0xb0/0xd0
[   22.816017]  [<c105b96c>] ? __might_sleep+0x2c/0x80
[   22.817295]  [<c1ca602d>] __sys_sendmsg+0x2d/0x60
[   22.818530]  [<c1ca6cb6>] SYSC_socketcall+0x7f6/0x9a0
[   22.819790]  [<c13df2f8>] ? __copy_to_user_ll+0x8/0x10
[   22.820970]  [<c101d789>] ? save_fsave_header+0x39/0xa0
[   22.822184]  [<c105b96c>] ? __might_sleep+0x2c/0x80
[   22.823324]  [<c1046ff1>] ? recalc_sigpending+0x11/0x40
[   22.824500]  [<c105b96c>] ? __might_sleep+0x2c/0x80
[   22.825717]  [<c101cae1>] ? fpu__restore+0x61/0x140
[   22.840003]  [<c1ca6f2e>] SyS_socketcall+0xe/0x10
[   22.841188]  [<c100123f>] do_int80_syscall_32+0x3f/0xa0
[   22.842375]  [<c1eff6a1>] entry_INT80_32+0x31/0x31
[   29.059961] sock: process `trinity-main' is using obsolete setsockopt SO_BSDCOMPAT
[   29.099148] irda_setsockopt: not allowed to set MAXSDUSIZE for this socket type!

Elapsed time: 30
qemu-system-i386 -enable-kvm -kernel /pkg/linux/i386-randconfig-sb0-04060654/gcc-5/29405a159bb1653c5a7c55f86f27418714989322/vmlinuz-4.6.0-rc1-00194-g29405a1 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-openwrt-i386-15/bisect_boot-1-openwrt-i386.cgz-i386-randconfig-sb0-04060654-29405a159bb1653c5a7c55f86f27418714989322-20160406-96797-1rryijw-0.yaml ARCH=i386 kconfig=i386-randconfig-sb0-04060654 branch=linux-devel/devel-spot-201604060629 commit=29405a159bb1653c5a7c55f86f27418714989322 BOOT_IMAGE=/pkg/linux/i386-randconfig-sb0-04060654/gcc-5/29405a159bb1653c5a7c55f86f27418714989322/vmlinuz-4.6.0-rc1-00194-g29405a1 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-openwrt-i386/openwrt-i386.cgz/i386-randconfig-sb0-04060654/gcc-5/29405a159bb1653c5a7c55f86f27418714989322/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-lkp-wsx03-openwrt-i386-15::dhcp drbd.minor_count=8'  -initrd /fs/sdc1/initrd-vm-lkp-wsx03-openwrt-i386-15 -m 192 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sdc1/disk0-vm-lkp-wsx03-openwrt-i386-15,media=disk,if=virtio -drive file=/fs/sdc1/disk1-vm-lkp-wsx03-openwrt-i386-15,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-lkp-wsx03-openwrt-i386-15 -serial file:/dev/shm/kboot/serial-vm-lkp-wsx03-openwrt-i386-15 -daemonize -display none -monitor null 
