early console in setup code
Probing EDD (edd=off to disable)... ok
[    0.000000] Linux version 4.8.0-rc6-02364-gd4f56b4 (kbuild@lkp-ib03) (gcc version 4.9.4 (Debian 4.9.4-2) ) #29 SMP PREEMPT Sun Sep 25 04:28:45 CST 2016
[    0.000000] Command line: ip=::::vm-lkp-hsw01-yocto-x86_64-21::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-hsw01-yocto-x86_64-21/trinity-300s-yocto-minimal-x86_64.cgz-d4f56b47a8fac90b15adfae80a42a2735d6b3213-20160925-126574-12zjeb0-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-i0-201639 branch=linux-review/Christopher-Pezley/staging-ion-Align-cases-with-switch/20160925-005452 commit=d4f56b47a8fac90b15adfae80a42a2735d6b3213 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-i0-201639/gcc-4.9/d4f56b47a8fac90b15adfae80a42a2735d6b3213/vmlinuz-4.8.0-rc6-02364-gd4f56b4 max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-lkp-hsw01-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-i0-201639/gcc-4.9/d4f56b47a8fac90b15adfae80a42a2735d6b3213/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_loglevel early
[    0.000000] KERNEL supported cpus:
[    0.000000]   Centaur CentaurHauls
[    0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init.
[    0.000000] CPU: Your system may be unstable.
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffe0000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1ffe0 max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6630-0x000f663f] mapped at [ffff8800000f6630]
[    0.000000]   mpc: f6640-f6718
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x045c0000, 0x045c0fff] PGTABLE
[    0.000000] BRK [0x045c1000, 0x045c1fff] PGTABLE
[    0.000000] BRK [0x045c2000, 0x045c2fff] PGTABLE
[    0.000000] BRK [0x045c3000, 0x045c3fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1fb10000-0x1ffdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6460 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001FFE1737 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000001FFE1613 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000001FFE0040 0015D3 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000001FFE0000 000040
[    0.000000] ACPI: APIC 0x000000001FFE1687 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000001FFE16FF 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1fa90001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 3482290820 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000001ffdffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001ffdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffdffff]
[    0.000000] On node 0 totalpages: 130942
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1984 pages used for memmap
[    0.000000]   DMA32 zone: 126944 pages, LIFO batch:31
[    0.000000] kasan: KernelAddressSanitizer initialized
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 41 pages/cpu @ffff88001a400000 s136192 r0 d31744 u2097152
[    0.000000] pcpu-alloc: s136192 r0 d31744 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1a4158c0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128873
[    0.000000] Kernel command line: ip=::::vm-lkp-hsw01-yocto-x86_64-21::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-hsw01-yocto-x86_64-21/trinity-300s-yocto-minimal-x86_64.cgz-d4f56b47a8fac90b15adfae80a42a2735d6b3213-20160925-126574-12zjeb0-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-i0-201639 branch=linux-review/Christopher-Pezley/staging-ion-Align-cases-with-switch/20160925-005452 commit=d4f56b47a8fac90b15adfae80a42a2735d6b3213 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-i0-201639/gcc-4.9/d4f56b47a8fac90b15adfae80a42a2735d6b3213/vmlinuz-4.8.0-rc6-02364-gd4f56b4 max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-lkp-hsw01-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-i0-201639/gcc-4.9/d4f56b47a8fac90b15adfae80a42a2735d6b3213/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_logleve
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Memory: 380232K/523768K available (20552K kernel code, 2919K rwdata, 5712K rodata, 1440K init, 21952K bss, 143536K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Running RCU self tests
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:4352 nr_irqs:48 16
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 8159 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2594.002 MHz processor
[    0.159895] Calibrating delay loop (skipped) preset value.. 5190.15 BogoMIPS (lpj=8646640)
[    0.160465] pid_max: default: 4096 minimum: 301
[    0.160855] ACPI: Core revision 20160422
[    0.196385] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.196840] 
[    0.197242] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.197729] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.200053] mce: CPU supports 10 MCE banks
[    0.200370] mce: unknown CPU type - not enabling MCE support
[    0.200750] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.201149] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.216821] Freeing SMP alternatives memory: 44K (ffffffff83043000 - ffffffff8304e000)
[    0.220489] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.220982] smpboot: Max logical packages: 1
[    0.221312] enabled ExtINT on CPU#0
[    0.222066] ENABLING IO-APIC IRQs
[    0.222321] init IO_APIC IRQs
[    0.222528]  apic 0 pin 0 not connected
[    0.222863] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.223631] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.224540] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.225436] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.226295] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.227146] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.228055] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.228957] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.229837] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.230695] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.231586] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.232461] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.233339] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.234217] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.235130] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.235984]  apic 0 pin 16 not connected
[    0.236411]  apic 0 pin 17 not connected
[    0.236815]  apic 0 pin 18 not connected
[    0.237226]  apic 0 pin 19 not connected
[    0.237657]  apic 0 pin 20 not connected
[    0.238062]  apic 0 pin 21 not connected
[    0.238468]  apic 0 pin 22 not connected
[    0.238867]  apic 0 pin 23 not connected
[    0.239414] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.240032] Using local APIC timer interrupts.
[    0.240032] calibrating APIC timer ...
[    0.344223] ... lapic delta = 6248973
[    0.344472] ... PM-Timer delta = 357891
[    0.344720] ... PM-Timer result ok
[    0.344941] ..... delta 6248973
[    0.345150] ..... mult: 268391373
[    0.345364] ..... calibration result: 3332785
[    0.345658] ..... CPU clock speed is 2593.2564 MHz.
[    0.345978] ..... host bus clock speed is 999.3118 MHz.
[    0.346354] smpboot: CPU0: GenuineIntel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[    0.347050] Performance Events: no PMU driver, software events only.
[    0.373100] x86: Booted up 1 node, 1 CPUs
[    0.373399] smpboot: Total of 1 processors activated (5190.15 BogoMIPS)
[    0.375460] devtmpfs: initialized
[    0.382155] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.382987] xor: measuring software checksum speed
[    0.416367]    prefetch64-sse: 24404.400 MB/sec
[    0.449681]    generic_sse: 21912.000 MB/sec
[    0.450000] xor: using function: prefetch64-sse (24404.400 MB/sec)
[    0.450415] pinctrl core: initialized pinctrl subsystem
[    0.451799] regulator-dummy: no parameters
[    0.452758] RTC time: 20:32:36, date: 09/24/16
[    0.454300] NET: Registered protocol family 16
[    0.466425] cpuidle: using governor menu
[    0.468178] ACPI: bus type PCI registered
[    0.468646] dca service started, version 1.12.1
[    0.469107] PCI: Using configuration type 1 for base access
[    0.600345] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.669669] raid6: sse2x1   gen()  3000 MB/s
[    0.726312] raid6: sse2x1   xor()  2994 MB/s
[    0.782973] raid6: sse2x2   gen()  3336 MB/s
[    0.839633] raid6: sse2x2   xor()  3342 MB/s
[    0.896275] raid6: sse2x4   gen()  6302 MB/s
[    0.952929] raid6: sse2x4   xor()  5780 MB/s
[    0.953250] raid6: using algorithm sse2x4 gen() 6302 MB/s
[    0.953605] raid6: .... xor() 5780 MB/s, rmw enabled
[    0.953944] raid6: using intx1 recovery algorithm
[    0.955541] ACPI: Added _OSI(Module Device)
[    0.955845] ACPI: Added _OSI(Processor Device)
[    0.956150] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.956475] ACPI: Added _OSI(Processor Aggregator Device)
[    0.973870] ACPI: Interpreter enabled
[    0.974314] ACPI: (supports S0 S3 S4 S5)
[    0.974575] ACPI: Using IOAPIC for interrupt routing
[    0.975072] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.067125] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.067578] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments]
[    1.068150] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    1.068620] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    1.070311] PCI host bridge to bus 0000:00
[    1.070608] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.071065] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.071526] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.072025] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[    1.072529] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.072988] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    1.076396] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    1.079782] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    1.084728] pci 0000:00:01.1: reg 0x20: [io  0xc080-0xc08f]
[    1.086724] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.087205] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.087635] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.088104] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.091277] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    1.092035] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    1.092524] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    1.095708] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    1.097818] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    1.101254] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    1.107782] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    1.112273] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    1.114005] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    1.115536] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    1.122929] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    1.127013] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    1.129211] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    1.131491] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    1.145854] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    1.147431] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[    1.158097] pci_bus 0000:00: on NUMA node 0
[    1.167974] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    1.170749] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.172867] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.174898] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.176297] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.180917] ACPI: Enabled 16 GPEs in block 00 to 0F
[    1.189980] SCSI subsystem initialized
[    1.190611] libata version 3.00 loaded.
[    1.191680] ACPI: bus type USB registered
[    1.192507] usbcore: registered new interface driver usbfs
[    1.193265] usbcore: registered new interface driver hub
[    1.193767] usbcore: registered new device driver usb
[    1.194839] Linux video capture interface: v2.00
[    1.195256] pps_core: LinuxPPS API ver. 1 registered
[    1.195620] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.196307] PTP clock support registered
[    1.197054] Linux cec interface: v0.10
[    1.197475] Unable to find dmi tokens
[    1.200249] FPGA manager framework
[    1.200584] PCI: Using ACPI for IRQ routing
[    1.201018] PCI: pci_cache_line_size set to 64 bytes
[    1.201704] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.202112] e820: reserve RAM buffer [mem 0x1ffe0000-0x1fffffff]
[    1.204768] NET: Registered protocol family 23
[    1.205272] Bluetooth: Core ver 2.21
[    1.205633] NET: Registered protocol family 31
[    1.205921] Bluetooth: HCI device and connection manager initialized
[    1.206368] Bluetooth: HCI socket layer initialized
[    1.206722] Bluetooth: L2CAP socket layer initialized
[    1.207956] nfc: nfc_init: NFC Core ver 0.1
[    1.208378] NET: Registered protocol family 39
[    1.210183] clocksource: Switched to clocksource kvm-clock
[    1.211000] VFS: Disk quotas dquot_6.6.0
[    1.211354] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.212438] FS-Cache: Loaded
[    1.213228] CacheFiles: Loaded
[    1.213613] pnp: PnP ACPI init
[    1.215025] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.216715] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.218285] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.218888] pnp 00:03: [dma 2]
[    1.219441] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.220808] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.222144] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.223706] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.230653] pnp: PnP ACPI: found 7 devices
[    1.239018] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.240246] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.240668] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.241094] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.241557] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[    1.242113] NET: Registered protocol family 1
[    1.242473] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.242868] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.243260] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.243775] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.244365] PCI: CLS 0 bytes, default 64
[    1.245567] Unpacking initramfs...
[    2.461416] Freeing initrd memory: 4928K (ffff88001fb10000 - ffff88001ffe0000)
[    2.464057] Machine check injector initialized
[    2.467821] PCLMULQDQ-NI instructions are not detected.
[    2.468333] AVX or AES-NI instructions are not detected.
[    2.468725] CPU feature 'AVX registers' is not supported.
[    2.469082] AVX2 or AES-NI instructions are not detected.
[    2.469443] AVX2 instructions are not detected.
[    2.470528] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    2.471683] spin_lock-torture: Creating torture_shuffle task
[    2.472225] spin_lock-torture: Creating torture_stutter task
[    2.472787] spin_lock-torture: torture_shuffle task started
[    2.473404] spin_lock-torture: Creating lock_torture_writer task
[    2.474545] spin_lock-torture: torture_stutter task started
[    2.475004] spin_lock-torture: Creating lock_torture_writer task
[    2.475479] spin_lock-torture: lock_torture_writer task started
[    2.475924] spin_lock-torture: Creating lock_torture_stats task
[    2.476392] spin_lock-torture: lock_torture_writer task started
[    2.477288] torture_init_begin: Refusing rcu init: spin_lock running.
[    2.477723] torture_init_begin: One torture test at a time!
[    2.479750] futex hash table entries: 16 (order: -1, 2048 bytes)
[    2.481342] spin_lock-torture: lock_torture_stats task started
[    2.485542] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    2.526326] zbud: loaded
[    2.549303] efs: 1.0a - http://aeschi.ch.eu.org/efs/
[    2.555380] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    2.556214] fuse init (API version 7.25)
[    2.559603] JFS: nTxBlock = 3009, nTxLock = 24075
[    2.564882] NILFS version 2 loaded
[    2.565131] befs: version: 0.9.3
[    2.574707] OCFS2 User DLM kernel interface loaded
[    2.613206] NET: Registered protocol family 38
[    2.613760] async_tx: api initialized (async)
[    2.614198] Key type asymmetric registered
[    2.614596] Asymmetric key parser 'x509' registered
[    2.615882] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    2.620295] io scheduler noop registered
[    2.620601] io scheduler deadline registered (default)
[    2.621007] start plist test
[    2.628848] end plist test
[    2.629156] test_string_helpers: Running tests...
[    2.640634] test_hexdump: all 1184 tests passed
[    2.641746] test_firmware: interface ready
[    2.661188] test_hash: __hash_32() has no arch implementation to test.
[    2.661869] test_hash: hash_32() has no arch implementation to test.
[    2.662519] test_hash: hash_64() has no arch implementation to test.
[    2.663188] test_hash: 33152 tests passed.
[    2.664962] test_printf: all 260 tests passed
[    2.887846] test_bitmap: all 460506 tests passed
[    2.888868] xz_dec_test: module loaded
[    2.889269] xz_dec_test: Create a device node with 'mknod xz_dec_test c 245 0' and write .xz files to it.
[    2.891732] glob: 64 self-tests passed, 0 failed
[    2.896323] rbtree testing
[    3.477003] tsc: Refined TSC clocksource calibration: 2593.987 MHz
[    3.477697] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25640c04e41, max_idle_ns: 440795289050 ns
[    5.392026]  -> 64730 cycles
[    5.528178] augmented rbtree testing -> 84657 cycles
[    8.990615] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    8.991074] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    8.991639] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.997363] ipmi message handler version 39.2
[    8.997781] IPMI System Interface driver.
[    8.998429] ipmi_si: Unable to find any System Interface(s)
[    9.003753] EINJ: EINJ table not found.
[    9.004015] ERST DBG: ERST support is disabled.
[    9.004757] ioatdma: Intel(R) QuickData Technology Driver 4.00
[    9.207118] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    9.231284] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    9.258432] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    9.265902] lp: driver loaded but no devices found
[    9.267003] Non-volatile memory driver v1.3
[    9.268389] ppdev: user-space parallel port driver
[    9.268977] telclk_interrupt = 0xf non-mcpbl0010 hw.
[    9.269568] Linux agpgart interface v0.103
[    9.271325] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    9.275156] parport_pc 00:04: reported by Plug and Play ACPI
[    9.276462] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    9.359301] lp0: using parport0 (interrupt-driven).
[    9.427567] loop: module loaded
[    9.428068] HP CISS Driver (v 3.6.26)
[    9.431008] MM: desc_per_page = 128
[    9.493250] nbd: registered device at major 43
[    9.539516] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[    9.540112] dummy-irq: no IRQ given.  Use irq=N
[    9.540914] Phantom Linux Driver, version n0.9.8, init OK
[    9.669647] panel: driver version 0.9.5 registered on parport0 (io=0x378).
[    9.671193] usbcore: registered new interface driver rtsx_usb
[    9.675492] usbcore: registered new interface driver viperboard
[    9.677154] usbcore: registered new interface driver dln2
[    9.678687] usbcore: registered new interface driver pn533_usb
[    9.679372] Uniform Multi-Platform E-IDE driver
[    9.679895] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[    9.680571] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[    9.681649]     ide0: BM-DMA at 0xc080-0xc087
[    9.681956]     ide1: BM-DMA at 0xc088-0xc08f
[    9.682272] Probing IDE interface ide0...
[   10.257838] Probing IDE interface ide1...
[   11.003684] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[   11.684283] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[   11.685350] hdc: MWDMA2 mode selected
[   11.686372] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   11.687155] ide1 at 0x170-0x177,0x376 on irq 15
[   11.695217] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[   11.696204] ide-gd driver 1.18
[   11.696819] ide-cd driver 5.00
[   11.698238] ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache
[   11.699155] cdrom: Uniform CD-ROM driver Revision: 3.20
[   11.705421] Loading iSCSI transport class v2.0-870.
[   11.711083] rdac: device handler registered
[   11.715250] emc: device handler registered
[   11.724771] snic:Cisco SCSI NIC Driver, ver 0.0.1.18
[   11.733925] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[   11.734331] Detecting Adaptec I2O RAID controllers...
[   11.735285] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[   11.740075] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[   11.741278] scsi: <fdomain> Detection failed (no card)
[   11.742574] iscsi: registered transport (qla4xxx)
[   11.743208] QLogic iSCSI HBA Driver
[   11.744569] megasas: 06.811.02.00-rc1
[   11.745126] mpt3sas version 13.100.00.00 loaded
[   11.747271] 3ware Storage Controller device driver for Linux v1.26.02.003.
[   11.748002] RocketRAID 3xxx/4xxx Controller driver v1.10.0
[   11.749393] iscsi: registered transport (be2iscsi)
[   11.749949] In beiscsi_module_init, tt=ffffffff82e02380
[   11.751195] osst :I: Tape driver with OnStream support version 0.99.4
[   11.751195] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[   11.753133] SCSI Media Changer driver v0.25 
[   11.754191] osd: LOADED open-osd 0.2.1
[   11.762861] scsi host0: scsi_debug: version 1.86 [20160430]
[   11.762861]   dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0
[   11.774900] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0186 PQ: 0 ANSI: 7
[   11.781875] mtdoops: mtd device (mtddev=name/number) must be supplied
[   11.782345] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
[   11.783143] device id = 2440
[   11.783456] device id = 2480
[   11.783957] device id = 24c0
[   11.784250] device id = 24d0
[   11.784523] device id = 25a1
[   11.784794] device id = 2670
[   11.785307] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff
[   11.786688] slram: not enough parameters.
[   11.787127] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.
[   11.787835] pmc551: not detected
[   11.796631] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[   11.823750] No valid DiskOnChip devices found
[   11.824491] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[   11.825518] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[   11.826437] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[   11.827408] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[   11.828347] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[   11.829285] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[   11.830276] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39
[   11.830920] nand: Toshiba NAND 128MiB 1,8V 8-bit
[   11.831396] nand: 128 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
[   11.832251] flash size: 128 MiB
[   11.832581] page size: 512 bytes
[   11.832913] OOB area size: 16 bytes
[   11.833276] sector size: 16 KiB
[   11.833662] pages number: 262144
[   11.834000] pages per sector: 32
[   11.834337] bus width: 8
[   11.834606] bits in sector size: 14
[   11.834961] bits in page size: 9
[   11.835296] bits in OOB size: 4
[   11.835618] flash size with OOB: 135168 KiB
[   11.836041] page address bytes: 4
[   11.836385] sector address bytes: 3
[   11.836758] options: 0x42
[   11.842549] Scanning device for bad blocks
[   11.930507] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[   11.931279] 0x000000000000-0x000008000000 : "NAND simulator partition 0"
[   11.955860] ftl_cs: FTL header not found.
[   11.964659] HSI/SSI char device loaded
[   11.973343] libphy: Fixed MDIO Bus: probed
[   11.978236] arcnet: arcnet loaded
[   11.978642] arcnet:rfc1051: RFC1051 "simple standard" (`s') encapsulation support loaded
[   11.979594] arcnet:arc_rawmode: raw mode (`r') encapsulation support loaded
[   11.980521] arcnet:com90io: COM90xx IO-mapped mode support (by David Woodhouse et el.)
[   11.981460] arcnet:com90io: E-mail me if you actually test this driver, please!
[   11.982326] (unnamed net_device) (uninitialized): No autoprobe for IO mapped cards; you must specify the base address!
[   11.983635] arcnet:com20020_pci: COM20020 PCI support
[   11.984905] vcan: Virtual CAN interface driver
[   11.985452] CAN device driver interface
[   11.986121] usbcore: registered new interface driver ems_usb
[   11.987024] usbcore: registered new interface driver esd_usb2
[   11.987896] usbcore: registered new interface driver gs_usb
[   11.988745] usbcore: registered new interface driver kvaser_usb
[   11.989456] cc770: CAN netdevice driver
[   11.990610] sja1000 CAN netdevice driver
[   11.991081] sja1000_isa: insufficient parameters supplied
[   11.992507] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   11.993352] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   14.314528] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[   14.655444] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[   14.656312] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[   14.657357] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   14.657991] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   14.658882] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[   14.659639] igb: Copyright (c) 2007-2014 Intel Corporation.
[   14.660569] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[   14.661384] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[   14.666259] YAM driver version 0.8 by F1OAT/F6FBB
[   14.676474] AX.25: bpqether driver version 004
[   14.677036] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[   14.677036] baycom_ser_fdx: version 0.10
[   14.687906] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[   14.688621] hdlcdrv: version 0.8
[   14.688977] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[   14.688977] baycom_ser_hdx: version 0.10
[   14.704943] baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[   14.704943] baycom_par: version 0.9
[   14.715510] usbcore: registered new interface driver irda-usb
[   14.716571] usbcore: registered new interface driver mcs7780
[   14.717378] usbcore: registered new interface driver kingsun-sir
[   14.718229] usbcore: registered new interface driver ksdazzle-sir
[   14.718815] usbcore: registered new interface driver ks959-sir
[   14.722848] NET3 PLIP version 2.4-parport gniibe@mri.co.jp
[   14.723477] plip0: Parallel port at 0x378, using IRQ 7.
[   14.724065] PPP generic driver version 2.4.2
[   14.725373] PPP BSD Compression module registered
[   14.725864] PPP MPPE Compression module registered
[   14.726348] NET: Registered protocol family 24
[   14.727307] usbcore: registered new interface driver i2400m_usb
[   14.741631] ieee802154fakelb ieee802154fakelb: added ieee802154 hardware
[   14.742413] usbcore: registered new interface driver kaweth
[   14.742946] usbcore: registered new interface driver rtl8150
[   14.743543] usbcore: registered new interface driver r8152
[   14.744068] usbcore: registered new interface driver lan78xx
[   14.744601] usbcore: registered new interface driver ipheth
[   14.745019] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[   14.753900] parport0: cannot grant exclusive access for device ks0108
[   14.754373] ks0108: ERROR: parport didn't register new device
[   14.757746] aoe: AoE v85 initialised.
[   14.759247] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   14.759701] ehci-pci: EHCI PCI platform driver
[   14.760422] ehci-platform: EHCI generic platform driver
[   14.761230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   14.761769] ohci-pci: OHCI PCI platform driver
[   14.762271] ohci-platform: OHCI generic platform driver
[   14.762991] uhci_hcd: USB Universal Host Controller Interface driver
[   14.765400] usbcore: registered new interface driver usblp
[   14.766110] usbcore: registered new interface driver usbtmc
[   14.766980] usbcore: registered new interface driver mdc800
[   14.767423] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[   14.768180] usbcore: registered new interface driver adutux
[   14.772267] usbcore: registered new interface driver appledisplay
[   14.772817] usbcore: registered new interface driver cytherm
[   14.773466] usbcore: registered new interface driver iowarrior
[   14.778784] usbcore: registered new interface driver isight_firmware
[   14.779390] usbcore: registered new interface driver legousbtower
[   14.779949] usbcore: registered new interface driver rio500
[   14.780489] usbcore: registered new interface driver usbtest
[   14.781072] usbcore: registered new interface driver usbsevseg
[   14.781704] usbcore: registered new interface driver yurex
[   14.782503] usbcore: registered new interface driver sisusb
[   14.783683] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[   14.784270] dummy_hcd dummy_hcd.0: Dummy host controller
[   14.785582] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[   14.786933] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   14.787493] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.788240] usb usb1: Product: Dummy host controller
[   14.788761] usb usb1: Manufacturer: Linux 4.8.0-rc6-02364-gd4f56b4 dummy_hcd
[   14.789465] usb usb1: SerialNumber: dummy_hcd.0
[   14.792407] hub 1-0:1.0: USB hub found
[   14.792929] hub 1-0:1.0: 1 port detected
[   14.798259] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
[   14.799451] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[   14.801868] serio: i8042 KBD port at 0x60,0x64 irq 1
[   14.803115] serio: i8042 AUX port at 0x60,0x64 irq 12
[   14.804419] parport0: cannot grant exclusive access for device parkbd
[   14.840873] mousedev: PS/2 mouse device common for all mice
[   14.843145] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[   14.845954] usbcore: registered new interface driver appletouch
[   14.846813] evbug: Connected device: input0 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[   14.855387] i2c /dev entries driver
[   14.856441] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[   14.897943] usb usb1: dummy_bus_suspend
[   14.989255] usbcore: registered new interface driver i2c-diolan-u2c
[   14.990080] i2c-parport: adapter type unspecified
[   14.990605] i2c-parport-light: adapter type unspecified
[   14.992959] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF
[   14.994408] Marvell M88ALP01 'CAFE' Camera Controller version 2
[   14.995535] pps pps0: new PPS source ktimer
[   14.995829] pps pps0: ktimer PPS source registered
[   14.996281] Driver for 1-wire Dallas network protocol.
[   14.998492] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[   14.999605] __power_supply_register: Expected proper parent device for 'test_ac'
[   15.001034] power_supply test_ac: uevent
[   15.001542] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[   15.002295] __power_supply_register: Expected proper parent device for 'test_battery'
[   15.003530] power_supply test_battery: uevent
[   15.003831] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[   15.009250] __power_supply_register: Expected proper parent device for 'test_usb'
[   15.010212] power_supply test_usb: uevent
[   15.010485] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[   15.013719] power_supply test_ac: power_supply_changed
[   15.014546] power_supply test_ac: power_supply_changed_work
[   15.015127] power_supply test_ac: power_supply_update_gen_leds 1
[   15.015812] power_supply test_ac: uevent
[   15.016240] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[   15.016759] power_supply test_ac: prop ONLINE=1
[   15.020231] power_supply test_battery: power_supply_changed
[   15.020668] power_supply test_battery: power_supply_changed_work
[   15.021230] power_supply test_battery: power_supply_update_bat_leds 2
[   15.021819] power_supply test_battery: uevent
[   15.022183] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[   15.022641] power_supply test_battery: prop STATUS=Discharging
[   15.023068] power_supply test_battery: prop CHARGE_TYPE=Fast
[   15.023469] power_supply test_battery: prop HEALTH=Good
[   15.023857] power_supply test_usb: power_supply_changed
[   15.024260] power_supply test_battery: prop PRESENT=1
[   15.024644] power_supply test_battery: prop TECHNOLOGY=Li-ion
[   15.025125] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[   15.025772] power_supply test_battery: prop CHARGE_FULL=100
[   15.026292] power_supply test_battery: prop CHARGE_NOW=50
[   15.026678] power_supply test_battery: prop CAPACITY=50
[   15.027163] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[   15.027601] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[   15.028042] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[   15.028471] power_supply test_battery: prop MODEL_NAME=Test battery
[   15.028999] power_supply test_battery: prop MANUFACTURER=Linux
[   15.029477] power_supply test_battery: prop SERIAL_NUMBER=4.8.0-rc6-02364-gd4f56b4
[   15.030024] power_supply test_battery: prop TEMP=26
[   15.030397] power_supply test_battery: prop VOLTAGE_NOW=3300
[   15.030816] power_supply test_usb: power_supply_changed_work
[   15.031226] power_supply test_usb: power_supply_update_gen_leds 1
[   15.031664] power_supply test_usb: uevent
[   15.031951] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[   15.032492] power_supply test_usb: prop ONLINE=1
[   15.456975] applesmc: supported laptop not found!
[   15.457481] applesmc: driver init failed (ret=-19)!
[   15.465508] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[   15.467440] evbug: Connected device: input2 (ImExPS/2 Generic Explorer Mouse at isa0060/serio1/input0)
[   16.520368] pc87360: PC8736x not detected, module not inserted
[   16.732383] Bluetooth: Virtual HCI driver ver 1.5
[   16.733459] usbcore: registered new interface driver bcm203x
[   16.734195] usbcore: registered new interface driver bfusb
[   16.734861] usbcore: registered new interface driver btusb
[   16.735593] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[   16.736477] usbcore: registered new interface driver ath3k
[   16.738263] CAPI 2.0 started up with major 68 (no middleware)
[   16.739047] Modular ISDN core version 1.1.29
[   16.740273] NET: Registered protocol family 34
[   16.740754] DSP module 2.0
[   16.741126] mISDN_dsp: DSP clocks every 80 samples. This equals 3 jiffies.
[   16.746038] mISDN: Layer-1-over-IP driver Rev. 2.00
[   16.746937] 0 virtual devices registered
[   16.747407] t1pci: revision 1.1.2.2
[   16.747676] b1: revision 1.1.2.2
[   16.747907] b1dma: revision 1.1.2.3
[   16.748274] c4: revision 1.1.2.2
[   16.748684] AVM Fritz PCI driver Rev. 2.3
[   16.749111] Winbond W6692 PCI driver Rev. 2.0
[   16.749535] mISDNipac module version 2.0
[   16.750322] sdhci: Secure Digital Host Controller Interface driver
[   16.751008] sdhci: Copyright(c) Pierre Ossman
[   16.752449] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[   16.765440] usbcore: registered new interface driver vub300
[   16.766648] sdhci-pltfm: SDHCI platform and OF driver helper
[   16.769977] leds_ss4200: no LED devices found
[   16.780724] ledtrig-cpu: registered to indicate activity on CPUs
[   16.783274] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   16.791495] usbcore: registered new interface driver usbkbd
[   16.792226] usbcore: registered new interface driver usbmouse
[   16.795214] FPGA DOWNLOAD --->
[   16.795543] FPGA image file name: xlinx_fpga_firmware.bit
[   16.796615] GPIO INIT FAIL!!
[   16.799462] Unable to find a compatible ARMv7 timer
[   16.799948] divide error: 0000 [#1] PREEMPT SMP KASAN
[   16.800459] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc6-02364-gd4f56b4 #29
[   16.801197] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   16.802055] task: ffff88001a124000 task.stack: ffff88001a140000
[   16.802645] RIP: 0010:[<ffffffff82f67e97>]  [<ffffffff82f67e97>] gb_timesync_init+0x35/0x78
[   16.803534] RSP: 0000:ffff88001a147e58  EFLAGS: 00010246
[   16.804040] RAX: 00038d7ea4c68000 RBX: 0000000000000000 RCX: ffffffff8114ea41
[   16.804716] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88001a124c2c
[   16.805393] RBP: ffff88001a147e60 R08: 0000000000000001 R09: 0000000000000000
[   16.806066] R10: ffff88001a147d70 R11: ffffffff83cddb35 R12: ffffffff82f67cc6
[   16.806744] R13: 0000000000000000 R14: ffffffff82fbe8b0 R15: ffffffff82fbe8f8
[   16.807421] FS:  0000000000000000(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000
[   16.808185] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.808728] CR2: 0000000000000000 CR3: 0000000002c0a000 CR4: 00000000000006b0
[   16.809405] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.810078] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   16.810752] Stack:
[   16.811058]  0000000000000000 ffff88001a147e78 ffffffff82f67d45 00000000ffffffff
[   16.811819]  ffff88001a147ee8 ffffffff82efe339 ffffffff82b89800 0000000000000012
[   16.812576]  ffff88001fa80fe5 0000000000000000 ffffffff82b0495f 0000000000000006
[   16.813332] Call Trace:
[   16.813577]  [<ffffffff82f67d45>] gb_init+0x7f/0xb3
[   16.814045]  [<ffffffff82efe339>] do_one_initcall+0x9a/0x12c
[   16.814588]  [<ffffffff82efe57b>] kernel_init_freeable+0x1b0/0x246
[   16.815180]  [<ffffffff82404a51>] kernel_init+0xc/0x108
[   16.815679]  [<ffffffff8240e40f>] ret_from_fork+0x1f/0x40
[   16.816197]  [<ffffffff82404a45>] ? rest_init+0x13c/0x13c
[   16.816724] Code: 85 c0 89 c3 74 12 48 c7 c7 64 ae b4 82 31 c0 e8 40 b5 27 fe 89 d8 eb 53 e8 cb 55 23 ff 31 d2 89 c6 48 b8 00 80 c6 a4 7e 8d 03 00 <48> f7 f6 31 d2 48 c7 c7 84 ae b4 82 48 89 35 de 65 64 01 48 89 
[   16.819509] RIP  [<ffffffff82f67e97>] gb_timesync_init+0x35/0x78
[   16.820094]  RSP <ffff88001a147e58>
[   16.820548] ---[ end trace c73ba0f929e81492 ]---
[   16.821001] Kernel panic - not syncing: Fatal exception
[   16.821528] Kernel Offset: disabled

Elapsed time: 20

initrds=(
	/osimage/yocto/yocto-minimal-x86_64.cgz
	/lkp/scheduled/vm-lkp-hsw01-yocto-x86_64-21/trinity-300s-yocto-minimal-x86_64.cgz-d4f56b47a8fac90b15adfae80a42a2735d6b3213-20160925-126574-12zjeb0-0.cgz
	/lkp/lkp/lkp-x86_64.cgz
	/osimage/pkg/static/trinity-x86_64.cgz
)

cat "${initrds[@]}" > /fs/sda5/initrd-vm-lkp-hsw01-yocto-x86_64-21

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-kernel /pkg/linux/x86_64-randconfig-i0-201639/gcc-4.9/d4f56b47a8fac90b15adfae80a42a2735d6b3213/vmlinuz-4.8.0-rc6-02364-gd4f56b4
	-initrd /fs/sda5/initrd-vm-lkp-hsw01-yocto-x86_64-21
	-m 512
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-drive file=/fs/sda5/disk0-vm-lkp-hsw01-yocto-x86_64-21,media=disk,if=virtio
	-pidfile /dev/shm/kboot/pid-vm-lkp-hsw01-yocto-x86_64-21
	-serial file:/dev/shm/kboot/vm-lkp-hsw01-yocto-x86_64-21/serial
	-serial file:/dev/shm/kboot/vm-lkp-hsw01-yocto-x86_64-21/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-hsw01-yocto-x86_64-21::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-lkp-hsw01-yocto-x86_64-21/trinity-300s-yocto-minimal-x86_64.cgz-d4f56b47a8fac90b15adfae80a42a2735d6b3213-20160925-126574-12zjeb0-0.yaml
	ARCH=x86_64
	kconfig=x86_64-randconfig-i0-201639
	branch=linux-review/Christopher-Pezley/staging-ion-Align-cases-with-switch/20160925-005452
	commit=d4f56b47a8fac90b15adfae80a42a2735d6b3213
	BOOT_IMAGE=/pkg/linux/x86_64-randconfig-i0-201639/gcc-4.9/d4f56b47a8fac90b15adfae80a42a2735d6b3213/vmlinuz-4.8.0-rc6-02364-gd4f56b4
	max_uptime=1500
	RESULT_ROOT=/result/trinity/300s/vm-lkp-hsw01-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-i0-201639/gcc-4.9/d4f56b47a8fac90b15adfae80a42a2735d6b3213/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
