early console in setup code
early console in extract_kernel
input_data: 0x0000000002e05276
input_len: 0x0000000000ad0f0e
output: 0x0000000001000000
output_len: 0x0000000001f205a0
kernel_total_size: 0x0000000002905000
booted via startup_32()
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
[    0.000000] Linux version 4.12.0-rc1-00039-gbff589b (kbuild@lkp-ws02) (gcc version 6.2.0 20160901 (Debian 6.2.0-3) ) #58 SMP Sun Jul 16 08:17:34 CST 2017
[    0.000000] Command line: ip=::::vm-lkp-nhm-dp1-openwrt-ia32-4::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-nhm-dp1-openwrt-ia32-4/boot-1-openwrt-i386-2016-03-16.cgz-bff589be59c50924a9715951160578e570cba5c6-20170716-72439-120txhp-0.yaml ARCH=x86_64 kconfig=x86_64-nfsroot branch=linus/master commit=bff589be59c50924a9715951160578e570cba5c6 BOOT_IMAGE=/pkg/linux/x86_64-nfsroot/gcc-6/bff589be59c50924a9715951160578e570cba5c6/vmlinuz-4.12.0-rc1-00039-gbff589b max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-nhm-dp1-openwrt-ia32/openwrt-i386-2016-03-16.cgz/x86_64-nfsroot/gcc-6/bff589be59c50924a9715951160578e570cba5c6/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001a3dffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001a3e0000-0x000000001a3fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1a3e0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: PAT not supported by CPU.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
Memory KASLR using RDTSC...
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6ba0-0x000f6baf] mapped at [ffff9e44000f6ba0]
[    0.000000]   mpc: f6bb0-f6c80
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9e4400099000] 99000 size 24576
[    0.000000] BRK [0x088da000, 0x088dafff] PGTABLE
[    0.000000] BRK [0x088db000, 0x088dbfff] PGTABLE
[    0.000000] BRK [0x088dc000, 0x088dcfff] PGTABLE
[    0.000000] BRK [0x088dd000, 0x088ddfff] PGTABLE
[    0.000000] BRK [0x088de000, 0x088defff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1a0a4000-0x1a3dffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F69C0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001A3E18DC 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000001A3E17B8 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000001A3E0040 001778 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000001A3E0000 000040
[    0.000000] ACPI: APIC 0x000000001A3E182C 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000001A3E18A4 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000001a3dffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1a0a0000-0x1a0a3fff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1a09f001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 842836135 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000001a3dffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001a3dffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001a3dffff]
[    0.000000] On node 0 totalpages: 107390
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1616 pages used for memmap
[    0.000000]   DMA32 zone: 103392 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x1a400000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 486 pages/cpu @ffff9e4419e00000 s1952728 r8192 d29736 u2097152
[    0.000000] pcpu-alloc: s1952728 r8192 d29736 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 19e0cc80
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 105689
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: ip=::::vm-lkp-nhm-dp1-openwrt-ia32-4::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-nhm-dp1-openwrt-ia32-4/boot-1-openwrt-i386-2016-03-16.cgz-bff589be59c50924a9715951160578e570cba5c6-20170716-72439-120txhp-0.yaml ARCH=x86_64 kconfig=x86_64-nfsroot branch=linus/master commit=bff589be59c50924a9715951160578e570cba5c6 BOOT_IMAGE=/pkg/linux/x86_64-nfsroot/gcc-6/bff589be59c50924a9715951160578e570cba5c6/vmlinuz-4.12.0-rc1-00039-gbff589b max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-nhm-dp1-openwrt-ia32/openwrt-i386-2016-03-16.cgz/x86_64-nfsroot/gcc-6/bff589be59c50924a9715951160578e570cba5c6/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Memory: 374080K/429560K available (13696K kernel code, 2049K rwdata, 6012K rodata, 3616K init, 15408K bss, 55480K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 54789 entries in 215 pages
[    0.001000] Running RCU self tests
[    0.001000] Hierarchical RCU implementation.
[    0.001000] 	RCU debugfs-based tracing is enabled.
[    0.001000] 	RCU lockdep checking is enabled.
[    0.001000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
[    0.001000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.001000] NR_IRQS:4352 nr_irqs:256 16
[    0.001000] Console: colour VGA+ 80x25
[    0.001000] console [tty0] enabled
[    0.001000] bootconsole [earlyser0] disabled
[    0.000000] Linux version 4.12.0-rc1-00039-gbff589b (kbuild@lkp-ws02) (gcc version 6.2.0 20160901 (Debian 6.2.0-3) ) #58 SMP Sun Jul 16 08:17:34 CST 2017
[    0.000000] Command line: ip=::::vm-lkp-nhm-dp1-openwrt-ia32-4::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-nhm-dp1-openwrt-ia32-4/boot-1-openwrt-i386-2016-03-16.cgz-bff589be59c50924a9715951160578e570cba5c6-20170716-72439-120txhp-0.yaml ARCH=x86_64 kconfig=x86_64-nfsroot branch=linus/master commit=bff589be59c50924a9715951160578e570cba5c6 BOOT_IMAGE=/pkg/linux/x86_64-nfsroot/gcc-6/bff589be59c50924a9715951160578e570cba5c6/vmlinuz-4.12.0-rc1-00039-gbff589b max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-nhm-dp1-openwrt-ia32/openwrt-i386-2016-03-16.cgz/x86_64-nfsroot/gcc-6/bff589be59c50924a9715951160578e570cba5c6/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001a3dffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001a3e0000-0x000000001a3fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1a3e0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: PAT not supported by CPU.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6ba0-0x000f6baf] mapped at [ffff9e44000f6ba0]
[    0.000000]   mpc: f6bb0-f6c80
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9e4400099000] 99000 size 24576
[    0.000000] BRK [0x088da000, 0x088dafff] PGTABLE
[    0.000000] BRK [0x088db000, 0x088dbfff] PGTABLE
[    0.000000] BRK [0x088dc000, 0x088dcfff] PGTABLE
[    0.000000] BRK [0x088dd000, 0x088ddfff] PGTABLE
[    0.000000] BRK [0x088de000, 0x088defff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1a0a4000-0x1a3dffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F69C0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001A3E18DC 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000001A3E17B8 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000001A3E0040 001778 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000001A3E0000 000040
[    0.000000] ACPI: APIC 0x000000001A3E182C 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000001A3E18A4 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000001a3dffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1a0a0000-0x1a0a3fff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1a09f001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 842836135 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000001a3dffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001a3dffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001a3dffff]
[    0.000000] On node 0 totalpages: 107390
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1616 pages used for memmap
[    0.000000]   DMA32 zone: 103392 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x1a400000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 486 pages/cpu @ffff9e4419e00000 s1952728 r8192 d29736 u2097152
[    0.000000] pcpu-alloc: s1952728 r8192 d29736 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 19e0cc80
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 105689
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: ip=::::vm-lkp-nhm-dp1-openwrt-ia32-4::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-nhm-dp1-openwrt-ia32-4/boot-1-openwrt-i386-2016-03-16.cgz-bff589be59c50924a9715951160578e570cba5c6-20170716-72439-120txhp-0.yaml ARCH=x86_64 kconfig=x86_64-nfsroot branch=linus/master commit=bff589be59c50924a9715951160578e570cba5c6 BOOT_IMAGE=/pkg/linux/x86_64-nfsroot/gcc-6/bff589be59c50924a9715951160578e570cba5c6/vmlinuz-4.12.0-rc1-00039-gbff589b max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-nhm-dp1-openwrt-ia32/openwrt-i386-2016-03-16.cgz/x86_64-nfsroot/gcc-6/bff589be59c50924a9715951160578e570cba5c6/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Memory: 374080K/429560K available (13696K kernel code, 2049K rwdata, 6012K rodata, 3616K init, 15408K bss, 55480K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 54789 entries in 215 pages
[    0.001000] Running RCU self tests
[    0.001000] Hierarchical RCU implementation.
[    0.001000] 	RCU debugfs-based tracing is enabled.
[    0.001000] 	RCU lockdep checking is enabled.
[    0.001000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
[    0.001000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.001000] NR_IRQS:4352 nr_irqs:256 16
[    0.001000] Console: colour VGA+ 80x25
[    0.001000] console [tty0] enabled
[    0.001000] bootconsole [earlyser0] disabled
[    0.001000] console [ttyS0] enabled
[    0.001000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001000] ... MAX_LOCK_DEPTH:          48
[    0.001000] ... MAX_LOCKDEP_KEYS:        8191
[    0.001000] ... CLASSHASH_SIZE:          4096
[    0.001000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001000] ... CHAINHASH_SIZE:          32768
[    0.001000]  memory used by lock dependency info: 8671 kB
[    0.001000]  per task-struct memory footprint: 2688 bytes
[    0.001000] ------------------------
[    0.001000] | Locking API testsuite:
[    0.001000] ----------------------------------------------------------------------------
[    0.001000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.001000]   --------------------------------------------------------------------------
[    0.001000]                      A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]                  A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]              A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]              A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]          A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]          A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]          A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]   --------------------------------------------------------------------------
[    0.001000]               recursive read-lock:             |  ok  |             |  ok  |
[    0.001000]            recursive read-lock #2:             |  ok  |             |  ok  |
[    0.001000]             mixed read-write-lock:             |  ok  |             |  ok  |
[    0.001000]             mixed write-read-lock:             |  ok  |             |  ok  |
[    0.001000]   --------------------------------------------------------------------------
[    0.001000]      hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.001000]      soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.001000]      hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.001000]      soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.001000]        sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
[    0.001000]        sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
[    0.001000]          hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.001000]          soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.001000]          hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.001000]          soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.001000]       hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.001000]       soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.001000]       hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.001000]       soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.001000]       hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.001000]       soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.001000]       hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.001000]       soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.001000]       hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.001000]       soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.001000]       hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.001000]       soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.001000]       hard-irq read-recursion/123:  ok  |
[    0.001000]       soft-irq read-recursion/123:  ok  |
[    0.001000]       hard-irq read-recursion/132:  ok  |
[    0.001000]       soft-irq read-recursion/132:  ok  |
[    0.001000]       hard-irq read-recursion/213:  ok  |
[    0.001000]       soft-irq read-recursion/213:  ok  |
[    0.001000]       hard-irq read-recursion/231:  ok  |
[    0.001000]       soft-irq read-recursion/231:  ok  |
[    0.001000]       hard-irq read-recursion/312:  ok  |
[    0.001000]       soft-irq read-recursion/312:  ok  |
[    0.001000]       hard-irq read-recursion/321:  ok  |
[    0.001000]       soft-irq read-recursion/321:  ok  |
[    0.001000]   --------------------------------------------------------------------------
[    0.001000]   | Wound/wait tests |
[    0.001000]   ---------------------
[    0.001000]                   ww api failures:  ok  |  ok  |  ok  |
[    0.001000]                ww contexts mixing:  ok  |  ok  |
[    0.001000]              finishing ww context:  ok  |  ok  |  ok  |  ok  |
[    0.001000]                locking mismatches:  ok  |  ok  |  ok  |
[    0.001000]                  EDEADLK handling:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]            spinlock nest unlocked:  ok  |
[    0.001000]   -----------------------------------------------------
[    0.001000]                                  |block | try  |context|
[    0.001000]   -----------------------------------------------------
[    0.001000]                           context:  ok  |  ok  |  ok  |
[    0.001000]                               try:  ok  |  ok  |  ok  |
[    0.001000]                             block:  ok  |  ok  |  ok  |
[    0.001000]                          spinlock:  ok  |  ok  |  ok  |
[    0.001000] -------------------------------------------------------
[    0.001000] Good, all 253 testcases passed! |
[    0.001000] ---------------------------------
[    0.001000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.001000] hpet clockevent registered
[    0.001023] tsc: Detected 2925.998 MHz processor
[    0.003020] Calibrating delay loop (skipped) preset value.. 5851.99 BogoMIPS (lpj=2925998)
[    0.004017] pid_max: default: 32768 minimum: 301
[    0.005067] ACPI: Core revision 20170303
[    0.036499] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.037734] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.038177] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.039000] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.039000] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.041808] CPU: Physical Processor ID: 0
[    0.042023] mce: CPU supports 10 MCE banks
[    0.043079] numa_add_cpu cpu 0 node 0: mask now 0
[    0.044013] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.045008] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.057749] Freeing SMP alternatives memory: 48K
[    0.059828] smpboot: Max logical packages: 1
[    0.060071] enabled ExtINT on CPU#0
[    0.062566] ENABLING IO-APIC IRQs
[    0.063029] init IO_APIC IRQs
[    0.064019]  apic 0 pin 0 not connected
[    0.066047] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.067064] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.068000] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.068000] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.068000] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.068000] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.068000] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.068000] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.068000] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.068000] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.068000] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.068000] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.068000] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.068000] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.068000] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.068000]  apic 0 pin 16 not connected
[    0.068000]  apic 0 pin 17 not connected
[    0.068000]  apic 0 pin 18 not connected
[    0.068000]  apic 0 pin 19 not connected
[    0.068000]  apic 0 pin 20 not connected
[    0.068000]  apic 0 pin 21 not connected
[    0.068000]  apic 0 pin 22 not connected
[    0.068000]  apic 0 pin 23 not connected
[    0.068000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068000] Using local APIC timer interrupts.
[    0.068000] calibrating APIC timer ...
[    0.069000] ... lapic delta = 6249937
[    0.069000] ... PM-Timer delta = 357948
[    0.069000] ... PM-Timer result ok
[    0.069000] ..... delta 6249937
[    0.069000] ..... mult: 268432750
[    0.069000] ..... calibration result: 999989
[    0.069000] ..... CPU clock speed is 2925.0957 MHz.
[    0.069000] ..... host bus clock speed is 999.0989 MHz.
[    0.069066] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[    0.071461] Performance Events: PMU not available due to virtualization, using software events only.
[    0.075664] smp: Bringing up secondary CPUs ...
[    0.076007] smp: Brought up 1 node, 1 CPU
[    0.077013] ----------------
[    0.078007] | NMI testsuite:
[    0.079017] --------------------
[    0.080007]   remote IPI:  ok  |
[    0.081007]    local IPI:  ok  |
[    0.082009] --------------------
[    0.083006] Good, all   2 testcases passed! |
[    0.084007] ---------------------------------
[    0.085009] smpboot: Total of 1 processors activated (5851.99 BogoMIPS)
[    0.087406] sched_clock: Marking stable (87000000, 0)->(1077101268, -990101268)
[    0.091150] devtmpfs: initialized
[    0.093299] x86/mm: Memory block size: 128MB
[    0.102451] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.106218] kworker/u2:0 (14) used greatest stack depth: 13336 bytes left
[    0.108372] futex hash table entries: 256 (order: 3, 32768 bytes)
[    0.110875] xor: measuring software checksum speed
[    0.122000]    prefetch64-sse: 11504.000 MB/sec
[    0.132996]    generic_sse: 10032.000 MB/sec
[    0.134555] xor: using function: prefetch64-sse (11504.000 MB/sec)
[    0.136862] RTC time:  8:18:43, date: 07/16/17
[    0.139484] NET: Registered protocol family 16
[    0.146406] cpuidle: using governor ladder
[    0.149397] kworker/u2:1 (16) used greatest stack depth: 12760 bytes left
[    0.151610] cpuidle: using governor menu
[    0.153645] PCCT header not found.
[    0.156334] ACPI: bus type PCI registered
[    0.158814] dca service started, version 1.12.1
[    0.161145] PCI: Using configuration type 1 for base access
[    0.430908] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.452009] raid6: sse2x1   gen()  3996 MB/s
[    0.473007] raid6: sse2x1   xor()  2808 MB/s
[    0.491004] raid6: sse2x2   gen()  5117 MB/s
[    0.509000] raid6: sse2x2   xor()  3439 MB/s
[    0.526996] raid6: sse2x4   gen()  4625 MB/s
[    0.544998] raid6: sse2x4   xor()  3210 MB/s
[    0.546679] raid6: using algorithm sse2x2 gen() 5117 MB/s
[    0.548591] raid6: .... xor() 3439 MB/s, rmw enabled
[    0.550449] raid6: using intx1 recovery algorithm
[    0.552673] ACPI: Added _OSI(Module Device)
[    0.554277] ACPI: Added _OSI(Processor Device)
[    0.556232] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.558038] ACPI: Added _OSI(Processor Aggregator Device)
[    0.579884] ACPI: Interpreter enabled
[    0.581800] ACPI: (supports S0 S3 S4 S5)
[    0.583581] ACPI: Using IOAPIC for interrupt routing
[    0.585678] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.672887] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.675315] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[    0.677491] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.679817] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.689184] PCI host bridge to bus 0000:00
[    0.690821] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.693060] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.695279] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.698200] pci_bus 0000:00: root bus resource [mem 0x1a400000-0xfebfffff window]
[    0.701239] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.703185] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.707583] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.712272] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.721570] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    0.726493] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.728938] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.731171] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.733602] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.738000] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.740719] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.744151] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.748876] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.753629] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.760713] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.772614] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.777191] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.781570] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.785902] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.797669] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.802352] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    0.805675] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    0.827162] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.831265] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.835167] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.839064] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.841862] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.845669] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.849225] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.851547] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.855063] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.857806] vgaarb: loaded
[    0.861387] SCSI subsystem initialized
[    0.864171] libata version 3.00 loaded.
[    0.867629] ACPI: bus type USB registered
[    0.871087] usbcore: registered new interface driver usbfs
[    0.874078] usbcore: registered new interface driver hub
[    0.876547] usbcore: registered new device driver usb
[    0.879704] pps_core: LinuxPPS API ver. 1 registered
[    0.882400] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.886223] PTP clock support registered
[    0.889147] Unable to find dmi tokens
[    0.892261] Advanced Linux Sound Architecture Driver Initialized.
[    0.895680] PCI: Using ACPI for IRQ routing
[    0.897554] PCI: pci_cache_line_size set to 64 bytes
[    0.900234] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.902474] e820: reserve RAM buffer [mem 0x1a3e0000-0x1bffffff]
[    0.908864] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.911626] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.913708] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.918424] clocksource: Switched to clocksource kvm-clock
[    1.209655] pnp: PnP ACPI init
[    1.212197] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.215134] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.218127] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.220550] pnp 00:03: [dma 2]
[    1.222401] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.225583] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.228720] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231900] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.238401] pnp: PnP ACPI: found 7 devices
[    1.287488] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.292759] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.295412] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.297529] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.299918] pci_bus 0000:00: resource 7 [mem 0x1a400000-0xfebfffff window]
[    1.303028] NET: Registered protocol family 2
[    1.305901] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    1.308329] TCP bind hash table entries: 4096 (order: 6, 327680 bytes)
[    1.310844] TCP: Hash tables configured (established 4096 bind 4096)
[    1.313067] UDP hash table entries: 256 (order: 3, 49152 bytes)
[    1.315637] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes)
[    1.318135] NET: Registered protocol family 1
[    1.320648] RPC: Registered named UNIX socket transport module.
[    1.322625] RPC: Registered udp transport module.
[    1.324393] RPC: Registered tcp transport module.
[    1.326207] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.328199] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.330364] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.332355] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.334468] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.337789] PCI: CLS 0 bytes, default 64
[    1.339960] Trying to unpack rootfs image as initramfs...
[    2.409492] Freeing initrd memory: 3312K
[    2.412503] kvm: no hardware support
[    2.436124] Scanning for low memory corruption every 60 seconds
[    2.440045] rcu-torture:--- Start of test: nreaders=1 nfakewriters=4 stat_interval=60 verbose=1 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0 stall_cpu_holdoff=10 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0
[    2.450365] rcu-torture: Creating rcu_torture_writer task
[    2.452512] rcu-torture: Creating rcu_torture_fakewriter task
[    2.454680] rcu-torture: rcu_torture_writer task started
[    2.454682] rcu-torture: GP expediting controlled from boot/sysfs for rcu,
[    2.454684] rcu-torture: Disabled dynamic grace-period expediting.
[    2.461787] rcu-torture: Creating rcu_torture_fakewriter task
[    2.463856] rcu-torture: rcu_torture_fakewriter task started
[    2.465887] rcu-torture: Creating rcu_torture_fakewriter task
[    2.467876] rcu-torture: rcu_torture_fakewriter task started
[    2.470464] rcu-torture: Creating rcu_torture_fakewriter task
[    2.472521] rcu-torture: rcu_torture_fakewriter task started
[    2.474504] rcu-torture: Creating rcu_torture_reader task
[    2.476776] rcu-torture: rcu_torture_fakewriter task started
[    2.479707] rcu-torture: Creating rcu_torture_stats task
[    2.481716] rcu-torture: rcu_torture_reader task started
[    2.483599] rcu-torture: Creating torture_shuffle task
[    2.485765] rcu-torture: rcu_torture_stats task started
[    2.487690] rcu-torture: Creating torture_stutter task
[    2.489562] rcu-torture: torture_shuffle task started
[    2.491472] rcu-torture: Creating rcu_torture_cbflood task
[    2.493532] rcu-torture: torture_stutter task started
[    2.496141] rcu-torture: rcu_torture_cbflood task started
[    2.500101] audit: initializing netlink subsys (disabled)
[    2.504566] Kprobe smoke test: started
[    2.506074] audit: type=2000 audit(1500164326.008:1): state=initialized audit_enabled=0 res=1
[    2.640323] Kprobe smoke test: passed successfully
[    2.643956] workingset: timestamp_bits=56 max_order=17 bucket_order=0
[    2.764740] NFS: Registering the id_resolver key type
[    2.766931] Key type id_resolver registered
[    2.768808] Key type id_legacy registered
[    2.770490] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    2.781766] fuse init (API version 7.26)
[    2.787241] JFS: nTxBlock = 2948, nTxLock = 23590
[    2.792308] SGI XFS with ACLs, security attributes, no debug enabled
[    2.811821] 9p: Installing v9fs 9p2000 file system support
[    2.817399] NILFS version 2 loaded
[    2.826353] async_tx: api initialized (async)
[    2.829332] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.832817] io scheduler noop registered
[    2.834483] io scheduler deadline registered
[    2.837526] io scheduler cfq registered (default)
[    2.839515] io scheduler mq-deadline registered
[    2.841231] io scheduler kyber registered
[    2.842879] start plist test
[    2.847036] end plist test
[    2.854397] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    2.862246] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.866717] ACPI: Power Button [PWRF]
[    2.871555] ioatdma: Intel(R) QuickData Technology Driver 4.00
[    3.136384] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.187680] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.222274] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    3.229291] Initializing Nozomi driver 2.1d
[    3.234903] Non-volatile memory driver v1.3
[    3.238145] Linux agpgart interface v0.103
[    3.240347] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    3.254015] Floppy drive(s): fd0 is 2.88M AMI BIOS
[    3.268101] FDC 0 is a S82078B
[    3.291483] brd: module loaded
[    3.314793] loop: module loaded
[    3.318622] lkdtm: No crash points registered, enable through debugfs
[    3.321619] Uniform Multi-Platform E-IDE driver
[    3.324001] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[    3.326859] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[    3.331860]     ide0: BM-DMA at 0xc040-0xc047
[    3.334154]     ide1: BM-DMA at 0xc048-0xc04f
[    3.335963] Probing IDE interface ide0...
[    3.462581] tsc: Refined TSC clocksource calibration: 2926.001 MHz
[    3.464741] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a2d3530f19, max_idle_ns: 440795230140 ns
[    3.875876] Probing IDE interface ide1...
[    4.563634] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[    5.188987] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[    5.191116] hdc: MWDMA2 mode selected
[    5.193604] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    5.195548] ide1 at 0x170-0x177,0x376 on irq 15
[    5.199160] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    5.203987] ide-gd driver 1.18
[    5.207495] Loading iSCSI transport class v2.0-870.
[    5.214201] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[    5.217930] Detecting Adaptec I2O RAID controllers...
[    5.220242] Adaptec aacraid driver 1.2.1[50792]-custom
[    5.223416] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    5.228071] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[    5.231903] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 9.00.00.00-k.
[    5.235898] iscsi: registered transport (qla4xxx)
[    5.237234] QLogic iSCSI HBA Driver
[    5.238781] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    5.240814] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    5.242347] megasas: 07.701.17.00-rc1
[    5.244330] mpt3sas version 15.100.00.00 loaded
[    5.246918] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    5.271131] tun: Universal TUN/TAP device driver, 1.6
[    5.276487] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    5.279321] Copyright (c) 2007 Atheros Corporation.
[    5.282258] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[    5.285105] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    5.287140] e100: Copyright(c) 1999-2006 Intel Corporation
[    5.289381] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    5.291569] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.526298] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    6.894108] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    6.896573] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    6.898621] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    6.900817] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    6.902807] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    6.904950] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.907082] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    6.910071] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    6.912018] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.0.0-k
[    6.915054] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[    6.917173] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[    6.919318] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[    6.921394] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    6.923724] sky2: driver version 1.30
[    6.926785] usbcore: registered new interface driver catc
[    6.929549] usbcore: registered new interface driver kaweth
[    6.931337] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    6.934563] usbcore: registered new interface driver pegasus
[    6.936728] usbcore: registered new interface driver rtl8150
[    6.938748] usbcore: registered new interface driver asix
[    6.940849] usbcore: registered new interface driver ax88179_178a
[    6.942916] usbcore: registered new interface driver cdc_ether
[    6.945056] usbcore: registered new interface driver cdc_eem
[    6.947134] usbcore: registered new interface driver dm9601
[    6.949491] usbcore: registered new interface driver smsc75xx
[    6.951576] usbcore: registered new interface driver smsc95xx
[    6.953775] usbcore: registered new interface driver gl620a
[    6.955739] usbcore: registered new interface driver net1080
[    6.957921] usbcore: registered new interface driver plusb
[    6.959817] usbcore: registered new interface driver rndis_host
[    6.962052] usbcore: registered new interface driver cdc_subset
[    6.964082] usbcore: registered new interface driver zaurus
[    6.966338] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    6.969370] usbcore: registered new interface driver int51x1
[    6.971340] usbcore: registered new interface driver cdc_ncm
[    6.973613] Fusion MPT base driver 3.04.20
[    6.975069] Copyright (c) 1999-2008 LSI Corporation
[    6.976795] Fusion MPT SPI Host driver 3.04.20
[    6.978626] Fusion MPT FC Host driver 3.04.20
[    6.980591] Fusion MPT SAS Host driver 3.04.20
[    6.982552] Fusion MPT misc device (ioctl) driver 3.04.20
[    6.984900] mptctl: Registered with Fusion MPT base driver
[    6.986661] mptctl: /dev/mptctl @ (major,minor=10,220)
[    6.988773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.990699] ehci-pci: EHCI PCI platform driver
[    6.992536] uhci_hcd: USB Universal Host Controller Interface driver
[    6.995762] usbcore: registered new interface driver usb-storage
[    6.997951] usbcore: registered new interface driver ums-alauda
[    7.000117] usbcore: registered new interface driver ums-cypress
[    7.002144] usbcore: registered new interface driver ums-datafab
[    7.004396] usbcore: registered new interface driver ums-freecom
[    7.006640] usbcore: registered new interface driver ums-isd200
[    7.008681] usbcore: registered new interface driver ums-jumpshot
[    7.010859] usbcore: registered new interface driver ums-karma
[    7.012922] usbcore: registered new interface driver ums-onetouch
[    7.015056] usbcore: registered new interface driver ums-sddr09
[    7.017226] usbcore: registered new interface driver ums-sddr55
[    7.019278] usbcore: registered new interface driver ums-usbat
[    7.021681] usbcore: registered new interface driver usbserial
[    7.023949] usbcore: registered new interface driver usbserial_generic
[    7.042524] usbserial: USB Serial support registered for generic
[    7.044714] usbcore: registered new interface driver belkin_sa
[    7.046836] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[    7.050139] usbcore: registered new interface driver mct_u232
[    7.052195] usbserial: USB Serial support registered for MCT U232
[    7.054598] usbcore: registered new interface driver usbtest
[    7.056706] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    7.061636] serio: i8042 KBD port at 0x60,0x64 irq 1
[    7.063568] serio: i8042 AUX port at 0x60,0x64 irq 12
[    7.067335] mousedev: PS/2 mouse device common for all mice
[    7.071288] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    7.075634] rtc_cmos 00:00: RTC can wake from S4
[    7.076562] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    7.082942] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[    7.083739] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05
[    7.084383] i6300esb: initialized (0xffffad55400e5000). heartbeat=30 sec (nowayout=0)
[    7.084530] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    7.084703] iTCO_vendor_support: vendor-support=0
[    7.084818] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16).
[    7.084822] watchdog: Software Watchdog: a legacy watchdog module is probably present.
[    7.085264] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[    7.092234] device-mapper: uevent: version 1.0.3
[    7.096128] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    7.099810] device-mapper: multipath round-robin: version 1.2.0 loaded
[    7.099817] device-mapper: multipath queue-length: version 0.2.0 loaded
[    7.099823] device-mapper: multipath service-time: version 0.3.0 loaded
[    7.101402] device-mapper: dm-log-userspace: version 1.3.0 loaded
[    7.102217] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    7.102867] usbcore: registered new interface driver usbhid
[    7.102869] usbhid: USB HID core driver
[    7.104086] dell_wmi: Cannot read Dell descriptor buffer - 1
[    7.104088] acer_wmi: Acer Laptop ACPI-WMI Extras
[    7.104097] acer_wmi: No or unsupported WMI interface, unable to load
[    7.112686] oprofile: using NMI interrupt.
[    7.112797] netem: version 1.3
[    7.112803] Netfilter messages via NETLINK v0.30.
[    7.113800] nf_conntrack version 0.5.0 (3072 buckets, 12288 max)
[    7.117502] ctnetlink v0.93: registering with nfnetlink.
[    7.125032] xt_time: kernel timezone is -0000
[    7.125383] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.125968] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[    7.125995] arp_tables: arp_tables: (C) 2002 David S. Miller
[    7.126102] Initializing XFRM netlink socket
[    7.134015] NET: Registered protocol family 10
[    7.140817] Segment Routing with IPv6
[    7.140904] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    7.142312] NET: Registered protocol family 17
[    7.142361] NET: Registered protocol family 15
[    7.144923] Bridge firewalling registered
[    7.144927] Ebtables v2.0 registered
[    7.145234] 9pnet: Installing 9P2000 support
[    7.145671] Key type dns_resolver registered
[    7.151144] ... APIC ID:      00000000 (0)
[    7.151149] ... APIC VERSION: 01050014
[    7.151165] 0000000000000000000000000000000000000000000000000000000000000000
[    7.151197] 0000000000000000000000000000000000000000000000000000000000000000
[    7.151229] 0000000000000000000000000000000000000000000000000000000000000000
[    7.151286] number of MP IRQ sources: 15.
[    7.151288] number of IO-APIC #0 registers: 24.
[    7.151289] testing the IO APIC.......................
[    7.151305] IO APIC #0......
[    7.151307] .... register #00: 00000000
[    7.151308] .......    : physical APIC id: 00
[    7.151310] .......    : Delivery Type: 0
[    7.151311] .......    : LTS          : 0
[    7.151313] .... register #01: 00170011
[    7.151314] .......     : max redirection entries: 17
[    7.151316] .......     : PRQ implemented: 0
[    7.151317] .......     : IO APIC version: 11
[    7.151318] .... register #02: 00000000
[    7.151320] .......     : arbitration: 00
[    7.151321] .... IRQ redirection table:
[    7.151323] IOAPIC 0:
[    7.151335]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.151347]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[    7.151359]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[    7.151372]  pin03, disabled, edge , high, V(33), IRR(0), S(0), logical , D(01), M(1)
[    7.151384]  pin04, disabled, edge , high, V(34), IRR(0), S(0), logical , D(01), M(1)
[    7.151398]  pin05, disabled, level, high, V(35), IRR(0), S(0), logical , D(01), M(1)
[    7.151410]  pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(01), M(1)
[    7.151505]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(01), M(1)
[    7.151519]  pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(01), M(1)
[    7.151532]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1)
[    7.151544]  pin0a, disabled, level, high, V(3A), IRR(0), S(0), logical , D(01), M(1)
[    7.151556]  pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(01), M(1)
[    7.151568]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[    7.151580]  pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(01), M(1)
[    7.151593]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(01), M(1)
[    7.151605]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(01), M(1)
[    7.151618]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.151630]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.151642]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.151654]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.151666]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.151678]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.151690]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.151702]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.151704] IRQ to pin mappings:
[    7.151706] IRQ0 -> 0:2
[    7.151710] IRQ1 -> 0:1
[    7.151714] IRQ3 -> 0:3
[    7.151718] IRQ4 -> 0:4
[    7.151722] IRQ5 -> 0:5
[    7.151726] IRQ6 -> 0:6
[    7.151730] IRQ7 -> 0:7
[    7.151734] IRQ8 -> 0:8
[    7.151738] IRQ9 -> 0:9
[    7.151742] IRQ10 -> 0:10
[    7.151746] IRQ11 -> 0:11
[    7.151750] IRQ12 -> 0:12
[    7.151754] IRQ13 -> 0:13
[    7.151758] IRQ14 -> 0:14
[    7.151762] IRQ15 -> 0:15
[    7.151766] .................................... done.
[    7.153635] registered taskstats version 1
[    7.179550] Btrfs loaded, crc32c=crc32c-generic
[    7.358885]   Magic number: 9:326:321
[    7.360395] tty ttyya: hash matches
[    7.361909] tty tty46: hash matches
[    7.363273] pci 0000:00:02.0: hash matches
[    7.365109] console [netcon0] enabled
[    7.366614] netconsole: network logging started
[    7.368258] rtc_cmos 00:00: setting system clock to 2017-07-16 08:18:51 UTC (1500193131)
[    7.377557] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.559225] random: fast init done
[    7.976615] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    9.417138] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[    9.422532] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.434494] Sending DHCP requests ., OK
[    9.437491] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[    9.440487] IP-Config: Complete:
[    9.442741]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[    9.446955]      host=vm-lkp-nhm-dp1-openwrt-ia32-4, domain=, nis-domain=(none)
[    9.450476]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=     nameserver0=10.0.2.3
[    9.455901] PM: Hibernation image not present or could not be loaded.
[    9.458933] ALSA device list:
[    9.460815]   No soundcards found.
[    9.479016] Freeing unused kernel memory: 3616K
[    9.481153] Write protecting the kernel read-only data: 20480k
[    9.489057] Freeing unused kernel memory: 616K
[    9.514899] Freeing unused kernel memory: 132K
[    9.617301] init: Console is alive
[    9.620045] init: - watchdog -
[   10.622969] init: - preinit -
[   10.654052] procd: - early -
[   10.655677] procd: - watchdog -
[   12.110293] procd: - ubus -
[   13.114046] procd: - init -
Please press Enter to activate this console.
[   15.920959] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
LKP: HOSTNAME vm-lkp-nhm-dp1-openwrt-ia32-4, MAC , kernel 4.12.0-rc1-00039-gbff589b 58, serial console /dev/ttyS0
[   17.392056] Kernel tests: Boot OK!
[   17.392056] LKP: waiting for network...
[   17.927040] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   17.934148] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.400681] /lkp/lkp/src/bin/run-lkp
[   19.400681] RESULT_ROOT=/result/boot/1/vm-lkp-nhm-dp1-openwrt-ia32/openwrt-i386-2016-03-16.cgz/x86_64-nfsroot/gcc-6/bff589be59c50924a9715951160578e570cba5c6/0
[   19.400681] job=/lkp/scheduled/vm-lkp-nhm-dp1-openwrt-ia32-4/boot-1-openwrt-i386-2016-03-16.cgz-bff589be59c50924a9715951160578e570cba5c6-20170716-72439-120txhp-0.yaml
[   19.400681] run-job /lkp/scheduled/vm-lkp-nhm-dp1-openwrt-ia32-4/boot-1-openwrt-i386-2016-03-16.cgz-bff589be59c50924a9715951160578e570cba5c6-20170716-72439-120txhp-0.yaml
[   19.400681] /bin/busybox wget -q http://inn:80/~lkp/cgi-bin/lkp-jobfile-append-var?job_file=/lkp/scheduled/vm-lkp-nhm-dp1-openwrt-ia32-4/boot-1-openwrt-i386-2016-03-16.cgz-bff589be59c50924a9715951160578e570cba5c6-20170716-72439-120txhp-0.yaml&job_state=running -O /dev/null
[   22.446863] kill 3968 cat /proc/kmsg 
[   22.446863] wait for background monitors: 3971 3978 oom-killer nfs-hang
[   25.150333] sysrq: SysRq : Emergency Sync
[   25.152364] Emergency Sync complete
[   25.154039] sysrq: SysRq : Resetting

Elapsed time: 30

initrds=(
	/osimage/openwrt/openwrt-i386-2016-03-16.cgz
	/lkp/scheduled/vm-lkp-nhm-dp1-openwrt-ia32-4/boot-1-openwrt-i386-2016-03-16.cgz-bff589be59c50924a9715951160578e570cba5c6-20170716-72439-120txhp-0.cgz
	/lkp/lkp/lkp-i386.cgz
	/pkg/linux/x86_64-nfsroot/gcc-6/bff589be59c50924a9715951160578e570cba5c6/modules.cgz
)

cat "${initrds[@]}" > /fs/sda3/initrd-vm-lkp-nhm-dp1-openwrt-ia32-4

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-kernel /pkg/linux/x86_64-nfsroot/gcc-6/bff589be59c50924a9715951160578e570cba5c6/vmlinuz-4.12.0-rc1-00039-gbff589b
	-initrd /fs/sda3/initrd-vm-lkp-nhm-dp1-openwrt-ia32-4
	-m 420
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-pidfile /dev/shm/kboot/pid-vm-lkp-nhm-dp1-openwrt-ia32-4
	-serial file:/dev/shm/kboot/vm-lkp-nhm-dp1-openwrt-ia32-4/serial
	-serial file:/dev/shm/kboot/vm-lkp-nhm-dp1-openwrt-ia32-4/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-nhm-dp1-openwrt-ia32-4::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-lkp-nhm-dp1-openwrt-ia32-4/boot-1-openwrt-i386-2016-03-16.cgz-bff589be59c50924a9715951160578e570cba5c6-20170716-72439-120txhp-0.yaml
	ARCH=x86_64
	kconfig=x86_64-nfsroot
	branch=linus/master
	commit=bff589be59c50924a9715951160578e570cba5c6
	BOOT_IMAGE=/pkg/linux/x86_64-nfsroot/gcc-6/bff589be59c50924a9715951160578e570cba5c6/vmlinuz-4.12.0-rc1-00039-gbff589b
	max_uptime=600
	RESULT_ROOT=/result/boot/1/vm-lkp-nhm-dp1-openwrt-ia32/openwrt-i386-2016-03-16.cgz/x86_64-nfsroot/gcc-6/bff589be59c50924a9715951160578e570cba5c6/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
