Linux version 2.6.22 (dugues@bazar) (gcc version 4.2.1 20070627 (prerelease) (Debian 4.2-20070627-1)) #2 SMP PREEMPT Tue Jul 24 10:20:30 CEST 2007
Command line: ro root=/dev/sda1 console=ttyS0 legacy_serial.force=1
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
 BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
 BIOS-e820: 00000000cff70000 - 00000000cff7b000 (ACPI data)
 BIOS-e820: 00000000cff7b000 - 00000000cff80000 (ACPI NVS)
 BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Entering add_active_range(0, 0, 155) 0 entries of 256 used
Entering add_active_range(0, 256, 851824) 1 entries of 256 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
end_pfn_map = 1245184
DMI 2.3 present.
ACPI: RSDP 000F6940, 0014 (r0 PTLTD )
ACPI: RSDT CFF76689, 0038 (r1 PTLTD    RSDT    6040000  LTP        0)
ACPI: FACP CFF7AE5C, 0074 (r1 INTEL  LINDHRST  6040000 PTL         3)
ACPI: DSDT CFF766C1, 479B (r1  Intel LINDHRST  6040000 MSFT  100000E)
ACPI: FACS CFF7BFC0, 0040
ACPI: MCFG CFF7AED0, 0040 (r1 PTLTD  	 MCFG    6040000  LTP        0)
ACPI: HPET CFF7AF10, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
ACPI: APIC CFF7AF48, 0090 (r1 PTLTD  	 APIC    6040000  LTP        0)
ACPI: BOOT CFF7AFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
Entering add_active_range(0, 0, 155) 0 entries of 256 used
Entering add_active_range(0, 256, 851824) 1 entries of 256 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1245184
early_node_map[3] active PFN ranges
    0:        0 ->      155
    0:      256 ->   851824
    0:  1048576 ->  1245184
On node 0 totalpages: 1048331
  DMA zone: 56 pages used for memmap
  DMA zone: 872 pages reserved
  DMA zone: 3067 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 833448 pages, LIFO batch:31
  Normal zone: 2688 pages used for memmap
  Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
Processor #6
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
Processor #7
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 3, address 0xfec10000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
PERCPU: Allocating 33256 bytes of per cpu data
Built 1 zonelists.  Total pages: 1030435
Kernel command line: ro root=/dev/sda1 console=ttyS0 legacy_serial.force=1
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2992.502 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x58d0000 - 0x98d0000
Memory: 4042416k/4980736k available (1941k kernel code, 150736k reserved, 975k data, 216k init)
Calibrating delay using timer specific routine.. 5989.43 BogoMIPS (lpj=11978873)
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12468722
Detected 12.468 MHz APIC timer.
Booting processor 1/4 APIC 0x6
Initializing CPU#1
Calibrating delay using timer specific routine.. 5985.11 BogoMIPS (lpj=11970237)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
                  Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 60 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Booting processor 2/4 APIC 0x1
Initializing CPU#2
Calibrating delay using timer specific routine.. 5984.99 BogoMIPS (lpj=11969990)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU2: Thermal monitoring enabled (TM1)
                  Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Booting processor 3/4 APIC 0x7
Initializing CPU#3
Calibrating delay using timer specific routine.. 5985.20 BogoMIPS (lpj=11970401)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU3: Thermal monitoring enabled (TM1)
                  Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Brought up 4 CPUs
migration_cost=1298
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support.
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE3A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE3B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *9)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0F13
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0401
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0501
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-GART: No AMD northbridge found.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved
pnp: 00:01: iomem range 0xfec81000-0xfec81fff has been reserved
pnp: 00:01: iomem range 0xfec81400-0xfec823ff could not be reserved
PCI: Bridge: 0000:01:00.0
  IO window: 2000-3fff
  MEM window: d0100000-d01fffff
  PREFETCH window: d1000000-d11fffff
PCI: Bridge: 0000:01:00.2
  IO window: 4000-4fff
  MEM window: d0200000-d02fffff
  PREFETCH window: d1200000-d12fffff
PCI: Bridge: 0000:00:02.0
  IO window: 2000-4fff
  MEM window: d0100000-d02fffff
  PREFETCH window: d1000000-d12fffff
PCI: Bridge: 0000:00:04.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
  IO window: 5000-5fff
  MEM window: d0300000-d03fffff
  PREFETCH window: d8000000-dfffffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:01:00.0 to 64
PCI: Setting latency timer of device 0000:01:00.2 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:05.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
Time: hpet clocksource has been installed.
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6737k freed
Simple Boot Flag at 0x3a set to 0x1
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:08:01.0
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
i6300ESB timer: initialized (0xffffc20000008000). heartbeat=30 sec (nowayout=0)
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:0b' and the driver 'serial'
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: match found with the PnP device '00:0c' and the driver 'serial'
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:07' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:08' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
TCP cubic registered
NET: Registered protocol family 1
Freeing unused kernel memory: 216k freed
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001400
SCSI subsystem initialized
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001420
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
e1000: 0000:02:01.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:0e:0c:82:fc:b5
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 16 (level, low) -> IRQ 16
e1000: 0000:03:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:0e:0c:82:fc:b4
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:08:02.0[A] -> GSI 25 (level, low) -> IRQ 25
e1000: 0000:08:02.0: e1000_probe: (PCI:66MHz:32-bit) 00:13:d3:8c:35:3a
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:08:03.0[A] -> GSI 26 (level, low) -> IRQ 26
e1000: 0000:08:03.0: e1000_probe: (PCI:66MHz:32-bit) 00:13:d3:8c:35:3b
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 18
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: LITE-ON COMBO SOHC-4832K, ATAPI CD/DVD-ROM drive
hdc: selected mode 0x42
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0001400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
        <Adaptec AIC7902 Ultra320 SCSI adapter>
        aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
scsi 0:0:0:0: Direct-Access     MAXTOR   ATLAS10K4_73SCA  DFV0 PQ: 0 ANSI: 3
 target0:0:0: asynchronous
scsi0:A:0:0: Tagged Queuing enabled.  Depth 4
 target0:0:0: Beginning Domain Validation
 target0:0:0: wide asynchronous
 target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127)
 target0:0:0: Ending Domain Validation
scsi 0:0:1:0: Direct-Access     MAXTOR   ATLAS10K4_73SCA  DFV0 PQ: 0 ANSI: 3
 target0:0:1: asynchronous
scsi0:A:1:0: Tagged Queuing enabled.  Depth 4
 target0:0:1: Beginning Domain Validation
 target0:0:1: wide asynchronous
 target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127)
 target0:0:1: Ending Domain Validation
scsi 0:0:2:0: Direct-Access     MAXTOR   ATLAS10K4_73SCA  DFV0 PQ: 0 ANSI: 3
 target0:0:2: asynchronous
scsi0:A:2:0: Tagged Queuing enabled.  Depth 4
 target0:0:2: Beginning Domain Validation
 target0:0:2: wide asynchronous
 target0:0:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127)
 target0:0:2: Ending Domain Validation
scsi 0:0:8:0: Processor         NEC      GEM318           0    PQ: 0 ANSI: 2
 target0:0:8: asynchronous
 target0:0:8: Beginning Domain Validation
 target0:0:8: Ending Domain Validation
ACPI: PCI Interrupt 0000:02:03.1[B] -> GSI 19 (level, low) -> IRQ 19
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
        <Adaptec AIC7902 Ultra320 SCSI adapter>
        aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
hdc: ATAPI 48X DVD-ROM CD-R/RW drive<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 142969680 512-byte hardware sectors (73200 MB)
, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: fd 00 10 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] 142969680 512-byte hardware sectors (73200 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: fd 00 10 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
 sda: sda1 sda2 < sda5 >
scsi 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] 142969680 512-byte hardware sectors (73200 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: fd 00 10 08
sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:1:0: [sdb] 142969680 512-byte hardware sectors (73200 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: fd 00 10 08
sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
 sdb: sdb1 sdb2 < sdb5 >
scsi 0:0:2:0: Attached scsi generic sg2 type 0
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:2:0: [sdc] 142969680 512-byte hardware sectors (73200 MB)
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: fd 00 10 08
sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:2:0: [sdc] 142969680 512-byte hardware sectors (73200 MB)
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: fd 00 10 08
sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
 sdc: unknown partition table
scsi 0:0:8:0: Attached scsi generic sg3 type 3
sd 0:0:2:0: [sdc] Attached SCSI disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
Adding 2923788k swap on /dev/sda5.  Priority:-1 extents:1 across:2923788k
EXT3 FS on sda1, internal journal
Probing IDE interface ide0...
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
