Hi!
> I was finally able to get C3 state working. It seems that my BIOS is
> leaving USB controllers in an active state(?). Without any USB drivers
> loaded, C3 is not possible. With drivers loaded, but no device plugged
> in C3 works fine. Kernel is 2.6.13-rc3-mm3 + acpi-sbs.
>
> With working C3 there are indeed differences:
>
> Voltage is 16.5 V
>
> HZ=100: ~460 mA => 7.59 W
> HZ=250: ~468 mA => 7.72 W
> HZ=1000: ~494 mA => 8.15 W
0.55W difference, wow. And that's 7% difference to overall system
consumption.
Pavel
--
teflon -- maybe it is a trademark, but it should not be.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
