On 7 June 2012 15:53, Subhash Jadavani <subha...@codeaurora.org> wrote:
>> > Just for experiment, can we hack the value set to POWER_CLASS field to
>> > 0x7 instead of 0x3? If this doesn't work, you may try other values
>> > (starting from 1 till 15) to see setting any of the non-zero value
> succeeds or
>> not.
>>
>> I tried 1 to 10 (as this is a 4.41 card) and none of them worked
> (including 7).
>
> Oh, that's not good.
>
> Girish / Saugata,
> Do you have any comments on this? Can you please comment on what type of
> testing was done when we had initially added this power class selection?
Today i tried om the eMMC 4.5 sample.
I forced the values from 1- 10
I was able to successfully set the power class value without any error
return value. It failed for the for the value 0xf.
>
> Regards,
> Subhash
>
>> -----Original Message-----
>> From: linux-mmc-ow...@vger.kernel.org [mailto:linux-mmc-
>> ow...@vger.kernel.org] On Behalf Of Marc Dietrich
>> Sent: Thursday, June 07, 2012 3:05 PM
>> To: Subhash Jadavani
>> Cc: 'Ulf Hansson'; Girish K S; saugata....@linaro.org; linux-
>> m...@vger.kernel.org
>> Subject: Re: power class selection fails on 3.5-rc1
>>
>> On Wednesday 06 June 2012 15:14:48 Subhash Jadavani wrote:
>> > > On 06/04/2012 06:35 PM, Marc Dietrich wrote:
>> > > > Hi,
>> > > >
>> > > > somehow I hope this would go away by itself, but it didn't :-( I
>> > > > reported this problem some time ago (see:
>> > > > http://www.mail-archive.com/linux-
>> > > > m...@vger.kernel.org/msg13688.html ) but got no clear answer or fix.
>> > > >
>> > > > In addition to the information I posted on the thread above, I
>> > > > also dumped the contents of the ext_csd register file (where reg
>> > > > values are not zero):
>> > > >
>> > > > reg Sandisk Toshiba
>> > > > 241 10 0x0a 50 0x32
>> > > > 239 0 0x00 51 0x33
>> > > > 238 0 0x00 119 0x77
>> > > > 234 0 0x00 30 0x1e
>> > > > 232 1 0x01 4 0x04
>> > > > 231 21 0x15 21 0x15
>> > > > 230 150 0x96 16 0x10
>> > > > 229 150 0x96 66 0x42
>> > > > 228 1 0x01 7 0x07
>> > > > 226 8 0x08 16 0x10
>> > > > 225 6 0x06 7 0x07
>> > > > 224 4 0x04 8 0x08
>> > > > 223 1 0x01 2 0x02
>> > > > 222 8 0x08 16 0x10
>> > > > 221 16 0x10 1 0x01
>> > > > 220 8 0x08 7 0x07
>> > > > 219 7 0x07 7 0x07
>> > > > 217 16 0x10 17 0x11
>> > > > 215 1 0x01 0 0x00
>> > > > 214 218 0xda 238 0xee
>> > > > 213 160 0xa0 128 0x80
>> > > > 210 10 0x0a 0 0x00
>> > > > 209 10 0x0a 60 0x3c
>> > > > 208 10 0x0a 0 0x00
>> > > > 207 10 0x0a 60 0x3c
>> > > > 206 10 0x0a 0 0x00
>> > > > 205 10 0x0a 30 0x1e
>> > > > 203 0 0x00 51 0x33
>> > > > 202 0 0x00 51 0x33
>> > > > 201 0 0x00 119 0x77
>> > > > 200 0 0x00 119 0x77
>> > > > 196 3 0x03 7 0x07
>> > > > 194 2 0x02 2 0x02
>> > > > 192 5 0x05 5 0x05
>> > > > 185 1 0x01 1 0x01
>> > > > 181 0 0x00 1 0x01
>> > > > 179 0 0x00 1 0x01
>> > > > 175 0 0x00 1 0x01
>> > > > 169 1 0x01 0 0x00
>> > > > 168 0 0x00 2 0x02
>> > > > 160 3 0x03 3 0x03
>> > > > 158 0 0x00 3 0x03
>> > > > 157 237 0xed 186 0xba
>> > > >
>> > > > The second and the third column is from a device with a Sandisk
>> > > > eMCC which works fine, while the last two columns are from a
>> > > > Toshiba eMMC which shows the error. Looking into it, I found that
>> > > > only the Toshiba eMMC specifies a powerclass in registers 203-200
>> > > > while Sandisk does not, so the powerclass is not changed in the
>> > > > latter case and the problem cannot be triggered there.
>> > > >
>> > > > I also attached a boot log with mmc debug enabled. I think there
>> > > > is not much I can do else. Either this eMMC is just bogus and
>> > > > needs blacklisting or there is some problem in the driver code.
>> >
>> > I checked the power class specification and MMC core driver handing, I
>> > don't see any issue with it. As you mentioned the PWR_CL_* fields are
>> > having non-zero values which means SWITCH (CMD6) will be sent to
>> > change the POWER_CLASS and from the logs you have attached, this
>> > switch command tries to set the POWER_CLASS to 3 which is resulting in
>> > SWITCH_ERROR in card and that's why it fails.
>> >
>> > If the PWR_CL_* fields are 0s (that's the case with SanDisk eMMC as
>> > you mentioned), SWITCH(cmd6) is not sent to the card.
>> >
>> > I was trying to check analyze more from logs and the above EXT_CSD
>> > fields for Toshiba card.
>> >
>> > EXT_CSD[203] => PWR_CL_26_360 => 0x33
>> > EXT_CSD[202] => PWR_CL_52_360 => 0x33
>> > EXT_CSD[201] => PWR_CL_26_195 => 0x77
>> > EXT_CSD[200] => PWR_CL_52_195 => 0x77
>> >
>> > >> [ 3.842382] mmc1: clock 48000000Hz busmode 2 powermode 2 cs 0 Vdd
>> 20
>> >
>> > width 0 timing 1
>> > Logs shows that clock = 48MHz, bus_width = 8-Bit, SDR mode, VDD = High
>> > voltage range. This would mean power class for this configuration will
>> > be in higher nibble of PWR_CL_52_360 field (EXT_CSD[202]) which is 0x3.
>> >
>> > >> [ 3.842390] mmc1: starting CMD6 arg 03bb0301 flags 0000049d
>> >
>> > "arg" field from this logs show that we are trying to set the
>> > POWER_CLASS
>> > (EXT_CSD[187]) field to value 0x3 which is resulting in switch error
>> > which ideally shouldn't.
>> >
>> > Just for experiment, can we hack the value set to POWER_CLASS field to
>> > 0x7 instead of 0x3? If this doesn't work, you may try other values
>> > (starting from 1 till 15) to see setting any of the non-zero value
> succeeds or
>> not.
>>
>> I tried 1 to 10 (as this is a 4.41 card) and none of them worked
> (including 7).
>>
>> > > > I hope this problem can be fixed or if it can't, I hope that
>> > > > commit 3d93576e (mmc: core: skip card initialization if power
>> > > > class selection
>> > > > fails) is reverted until the issues are sorted out.
>> >
>> > 3d93576e is really not the issue here. Reverting that patch is just a
>> > bad workaround to the problem. We should actually try to find why
>> > exactly setting the POWER_CLASS field is failing?
>>
>> sure, that would be the best solution...
>>
>> Marc
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body
>> of a message to majord...@vger.kernel.org More majordomo info at
>> http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
