Hi I will fix your comment and resend the patch. Thank you.
Best Regards, Jaehoon Chung On 07/17/2012 06:25 PM, S, Venkatraman wrote: > Some minor nits.. > > On Tue, Jul 17, 2012 at 8:14 AM, Jaehoon Chung <jh80.ch...@samsung.com> wrote: >> Enable eMMC background operations (BKOPS) feature. >> >> If URGENT_BKOPS is set after a response, note that BKOPS >> are required. After all I/O requests are finished, run >> BKOPS if required. Should read/write operations be requested >> during BKOPS, first issue HPI to interrupt the ongoing BKOPS >> and then service the request. >> If BKOPS-STATUS is upper than LEVEL2, need to check until clear >> the BKOPS-STATUS vaule. >> >> If you want to enable this feature, set MMC_CAP2_BKOPS. >> >> I tested with dw-mmc and sdhci controller. >> When repeating the writing 1GB data, at a certain time, performance is >> decreased. >> At that time, card is also triggered the Level-3 or Level-2. >> After running bkops, performance is recovered. >> >> Future considerations >> * Check BKOPS_LEVEL=1 and start BKOPS in a preventive manner. >> * Interrupt ongoing BKOPS before powering off the card. >> * How get BKOPS_STATUS value.(periodically send ext_csd command?) >> * If use periodic bkops, also consider runtime_pm control. >> >> Signed-off-by: Jaehoon Chung <jh80.ch...@samsung.com> >> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com> >> Signed-off-by: Konstantin Dorfman <kdorf...@codeaurora.org> >> Signed-off-by: Maya Erez <me...@codeaurora.org> >> --- >> Changelog v10: >> - Based on latest mmc-next >> - Only control the level-2/3. >> : If triggered upper than level2, immediately start bkops. >> - Revmoe the BKOPS_CAP2_INIT_BKOPS (move into mmc-util) >> - change use_busy_signal instead of waiting_for_prog_done for >> __mmc_switch >> Changelog V9: >> - Rebased on patch-v7. >> - Added Konstantin and Maya's patch >> : mmc:core: Define synchronous BKOPS timeout >> : mmc:core: eMMC4.5 BKOPS fixes >> - Removed periodic bkops >> : This feature will do in future work >> - Add __mmc_switch() for waiting_for_prod_done. >> >> Changelog V8: >> - Remove host->lock spin lock reviewed by Adrian >> - Support periodic start bkops >> - when bkops_status is level-3, if timeout is set to 0, send hpi. >> - Move the start-bkops point >> Changelog V7: >> - Use HPI command when issued URGENT_BKOPS >> - Recheck until clearing the bkops-status bit. >> Changelog V6: >> - Add the flag of check-bkops-status. >> (For fixing async_req problem) >> - Add the capability for MMC_CAP2_INIT_BKOPS. >> (When unset the bkops_en bit in ext_csd register) >> - modify the wrong condition. >> Changelog V5: >> - Rebase based on the latest mmc-next. >> - modify codes based-on Chris's comment >> Changelog V4: >> - Add mmc_read_bkops_status >> - When URGENT_BKOPS(level2-3), didn't use HPI command. >> - In mmc_switch(), use R1B/R1 according to level. >> Changelog V3: >> - move the bkops setting's location in mmc_blk_issue_rw_rq >> - modify condition checking >> - bkops_en is assigned ext_csd[EXT_CSD_BKOPS_EN] instead of "1" >> - remove the unused code >> - change pr_debug instead of pr_warn in mmc_send_hpi_cmd >> - Add the Future consideration suggested by Per >> Changelog V2: >> - Use EXCEPTION_STATUS instead of URGENT_BKOPS >> - Add function to check Exception_status(for eMMC4.5) >> --- >> drivers/mmc/core/core.c | 161 >> +++++++++++++++++++++++++++++++++++++++++++- >> drivers/mmc/core/mmc.c | 11 +++ >> drivers/mmc/core/mmc_ops.c | 27 ++++++- >> include/linux/mmc/card.h | 16 +++++ >> include/linux/mmc/core.h | 5 ++ >> include/linux/mmc/host.h | 2 +- >> include/linux/mmc/mmc.h | 19 +++++- >> 7 files changed, 233 insertions(+), 8 deletions(-) >> >> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c >> index 9503cab..52bdd33 100644 >> --- a/drivers/mmc/core/core.c >> +++ b/drivers/mmc/core/core.c >> @@ -41,6 +41,12 @@ >> #include "sd_ops.h" >> #include "sdio_ops.h" >> >> +/* >> + * The Background operation can take a long time, depends on the house >> keeping >> + * operations the card has to perform >> + */ >> +#define MMC_BKOPS_MAX_TIMEOUT (4 * 60 * 1000) /* max time to wait in ms */ >> + >> static struct workqueue_struct *workqueue; >> static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; >> >> @@ -245,6 +251,68 @@ mmc_start_request(struct mmc_host *host, struct >> mmc_request *mrq) >> host->ops->request(host, mrq); >> } >> >> +/** >> + * mmc_start_bkops - start BKOPS for supported cards >> + * @card: MMC card to start BKOPS >> + * >> + * Start background operations whenever requested. >> + * when the urgent BKOPS bit is set in a R1 command response >> + * then background operations should be started immediately. >> +*/ >> +void mmc_start_bkops(struct mmc_card *card) >> +{ >> + int err; >> + int timeout; >> + u8 use_busy_signal; >> + >> + BUG_ON(!card); >> + if (!card->ext_csd.bkops_en || !(card->host->caps2 & MMC_CAP2_BKOPS)) >> + return; >> + >> + if (mmc_is_exception_event(card, EXT_CSD_URGENT_BKOPS)) >> + if (card->ext_csd.raw_bkops_status) >> + mmc_card_set_need_bkops(card); >> + >> + /* >> + * If card is already doing bkops or need for >> + * bkops flag is not set, then do nothing just >> + * return >> + */ > Redundant comments. It is obvious from the code. > >> + if (mmc_card_doing_bkops(card) || !mmc_card_need_bkops(card)) > This check can be split into two. The mmc_card_doing_bkops() part > should go above the _is_exception_event() check, and can save an extra > EXT_CSD read. > > The second part can be folded as an else part of the > "" > + if (card->ext_csd.raw_bkops_status) > + mmc_card_set_need_bkops(card); > "" > above.. and return. > >> + return; >> + >> + mmc_claim_host(card->host); >> + if (card->ext_csd.raw_bkops_status >= EXT_CSD_BKOPS_LEVEL_2) { >> + timeout = MMC_BKOPS_MAX_TIMEOUT; >> + use_busy_signal = 0; >> + } else { >> + timeout = 0; >> + use_busy_signal = 1; >> + } >> + >> + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, >> + EXT_CSD_BKOPS_START, 1, timeout, use_busy_signal); >> + if (err) { >> + pr_warn("%s: error %d starting bkops\n", >> + mmc_hostname(card->host), err); >> + mmc_card_clr_need_bkops(card); >> + goto out; >> + } >> + >> + mmc_card_clr_need_bkops(card); >> + >> + /* >> + * For urgent bkops status (LEVEL_2 and more) >> + * bkops executed synchronously, otherwise >> + * the operation is in progress >> + */ >> + if (card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2) > This line can be replaced with > if (use_busy_signal) > for consistency. > >> + mmc_card_set_doing_bkops(card); >> +out: >> + mmc_release_host(card->host); >> +} >> +EXPORT_SYMBOL(mmc_start_bkops); >> + >> static void mmc_wait_done(struct mmc_request *mrq) >> { >> complete(&mrq->completion); >> @@ -354,6 +422,20 @@ struct mmc_async_req *mmc_start_req(struct mmc_host >> *host, >> if (host->areq) { >> mmc_wait_for_req_done(host, host->areq->mrq); >> err = host->areq->err_check(host->card, host->areq); >> + /* >> + * Check BKOPS urgency from each R1 response > s/from/for > >> + */ >> + if (host->card && mmc_card_mmc(host->card) && >> + ((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) || >> + (mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) && >> + (host->areq->mrq->cmd->resp[0] & R1_EXP_EVENT)) >> + mmc_start_bkops(host->card); >> + /* >> + * If areq exsit, > > Typo s/exsit/exist > >> + * we stop the bkops for foreground operation >> + */ >> + if (areq && mmc_card_doing_bkops(host->card)) >> + err = mmc_stop_bkops(host->card); >> } >> >> if (!err && areq) >> @@ -488,6 +570,72 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct >> mmc_command *cmd, int retries >> >> EXPORT_SYMBOL(mmc_wait_for_cmd); >> >> +/* >> + * mmc_stop_bkops - stop ongoing BKOPS >> + * @card: MMC card to check BKOPS >> + * >> + * Send HPI command to stop ongoing background operations, >> + * to allow rapid servicing of foreground operations,e.g. read/ >> + * writes. Wait until the card comes out of the programming state >> + * to avoid errors in servicing read/write requests. >> + */ >> +int mmc_stop_bkops(struct mmc_card *card) >> +{ >> + int err = 0; >> + >> + BUG_ON(!card); >> + err = mmc_interrupt_hpi(card); >> + >> + /* >> + * if err is EINVAL, it's status that can't issue HPI. >> + * Maybe it should be completed the BKOPS. >> + */ >> + if (!err || (err == -EINVAL)) { >> + mmc_card_clr_doing_bkops(card); >> + err = 0; >> + } >> + >> + return err; >> +} >> +EXPORT_SYMBOL(mmc_stop_bkops); >> + >> +int mmc_read_bkops_status(struct mmc_card *card) >> +{ >> + int err; >> + u8 ext_csd[512]; >> + >> + mmc_claim_host(card->host); >> + err = mmc_send_ext_csd(card, ext_csd); >> + mmc_release_host(card->host); >> + if (err) >> + return err; >> + >> + card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS]; >> + card->ext_csd.raw_exception_status = >> ext_csd[EXT_CSD_EXP_EVENTS_STATUS]; >> + >> + return 0; >> +} >> +EXPORT_SYMBOL(mmc_read_bkops_status); >> + >> +int mmc_is_exception_event(struct mmc_card *card, unsigned int value) >> +{ >> + int err; >> + >> + err = mmc_read_bkops_status(card); >> + if (err) { >> + pr_err("%s: Didn't read bkops status : %d\n", >> + mmc_hostname(card->host), err); >> + return 0; >> + } >> + >> + /* In eMMC 4.41, R1_EXCEPTION_EVENT is URGENT_BKOPS */ >> + if (card->ext_csd.rev == 5) >> + return 1; >> + >> + return (card->ext_csd.raw_exception_status & value) ? 1 : 0; >> +} >> +EXPORT_SYMBOL(mmc_is_exception_event); >> + >> /** >> * mmc_set_data_timeout - set the timeout for a data command >> * @data: data phase for command >> @@ -2328,8 +2476,14 @@ int mmc_suspend_host(struct mmc_host *host) >> mmc_bus_get(host); >> if (host->bus_ops && !host->bus_dead) { >> >> - if (host->bus_ops->suspend) >> + if (host->bus_ops->suspend) { >> + if (mmc_card_doing_bkops(host->card)) { >> + err = mmc_stop_bkops(host->card); >> + if (err) >> + goto out; >> + } >> err = host->bus_ops->suspend(host); >> + } >> >> if (err == -ENOSYS || !host->bus_ops->resume) { >> /* >> @@ -2416,6 +2570,11 @@ int mmc_pm_notify(struct notifier_block *notify_block, >> switch (mode) { >> case PM_HIBERNATION_PREPARE: >> case PM_SUSPEND_PREPARE: >> + if (host->card && mmc_card_mmc(host->card) && >> + mmc_card_doing_bkops(host->card)) { >> + mmc_interrupt_hpi(host->card); > > Better to use mmc_stop_bkops() instead of mmc_interrupt_hpi() ? > >> + mmc_card_clr_doing_bkops(host->card); >> + } >> >> spin_lock_irqsave(&host->lock, flags); >> host->rescan_disable = 1; >> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c >> index 7150f02..6fbffb6 100644 >> --- a/drivers/mmc/core/mmc.c >> +++ b/drivers/mmc/core/mmc.c >> @@ -463,6 +463,17 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 >> *ext_csd) >> } >> >> if (card->ext_csd.rev >= 5) { >> + /* check whether the eMMC card support BKOPS */ >> + if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) { >> + card->ext_csd.bkops = 1; >> + card->ext_csd.bkops_en = ext_csd[EXT_CSD_BKOPS_EN]; >> + card->ext_csd.raw_bkops_status = >> + ext_csd[EXT_CSD_BKOPS_STATUS]; >> + if (!card->ext_csd.bkops_en) >> + pr_info("%s: Didn't set BKOPS_EN bit!\n", >> + mmc_hostname(card->host)); >> + } >> + >> /* check whether the eMMC card supports HPI */ >> if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1) { >> card->ext_csd.hpi = 1; >> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c >> index 4ad994a..baf90e0 100644 >> --- a/drivers/mmc/core/mmc_ops.c >> +++ b/drivers/mmc/core/mmc_ops.c >> @@ -368,18 +368,19 @@ int mmc_spi_set_crc(struct mmc_host *host, int use_crc) >> } >> >> /** >> - * mmc_switch - modify EXT_CSD register >> + * __mmc_switch - modify EXT_CSD register >> * @card: the MMC card associated with the data transfer >> * @set: cmd set values >> * @index: EXT_CSD register index >> * @value: value to program into EXT_CSD register >> * @timeout_ms: timeout (ms) for operation performed by register write, >> * timeout of zero implies maximum possible timeout >> + * @wait_for_prod_done: is waiting for program done >> * >> * Modifies the EXT_CSD register for selected card. >> */ >> -int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, >> - unsigned int timeout_ms) >> +int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, >> + unsigned int timeout_ms, u8 use_busy_signal) >> { >> int err; >> struct mmc_command cmd = {0}; >> @@ -393,13 +394,24 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 >> index, u8 value, >> (index << 16) | >> (value << 8) | >> set; >> - cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; >> + >> + cmd.flags = MMC_CMD_AC; >> + if (use_busy_signal) >> + cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B; >> + else >> + cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1; >> + >> cmd.cmd_timeout_ms = timeout_ms; >> >> err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES); >> if (err) >> return err; >> >> + /* No need to check card status in case of BKOPS LEVEL2 switch*/ >> + if ((index == EXT_CSD_BKOPS_START) && >> + (card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2)) > Please don't mix policy into utility functions. May be replace with > use_busy_signal check instead. > >> + return 0; >> + >> /* Must check status to be sure of no errors */ >> do { >> err = mmc_send_status(card, &status); >> @@ -424,6 +436,13 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, >> u8 value, >> >> return 0; >> } >> +EXPORT_SYMBOL_GPL(__mmc_switch); >> + >> +int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, >> + unsigned int timeout_ms) >> +{ >> + return __mmc_switch(card, set, index, value, timeout_ms, 1); >> +} >> EXPORT_SYMBOL_GPL(mmc_switch); >> >> int mmc_send_status(struct mmc_card *card, u32 *status) >> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h >> index cdfbc3c..b9e11aa 100644 >> --- a/include/linux/mmc/card.h >> +++ b/include/linux/mmc/card.h >> @@ -79,10 +79,13 @@ struct mmc_ext_csd { >> bool hpi_en; /* HPI enablebit */ >> bool hpi; /* HPI support bit */ >> unsigned int hpi_cmd; /* cmd used as HPI */ >> + bool bkops; /* background support bit */ >> + bool bkops_en; /* background enable bit */ >> unsigned int data_sector_size; /* 512 bytes or 4KB >> */ >> unsigned int data_tag_unit_size; /* DATA TAG UNIT >> size */ >> unsigned int boot_ro_lock; /* ro lock support */ >> bool boot_ro_lockable; >> + u8 raw_exception_status; /* 53 */ >> u8 raw_partition_support; /* 160 */ >> u8 raw_erased_mem_count; /* 181 */ >> u8 raw_ext_csd_structure; /* 194 */ >> @@ -96,6 +99,7 @@ struct mmc_ext_csd { >> u8 raw_sec_erase_mult; /* 230 */ >> u8 raw_sec_feature_support;/* 231 */ >> u8 raw_trim_mult; /* 232 */ >> + u8 raw_bkops_status; /* 246 */ >> u8 raw_sectors[4]; /* 212 - 4 bytes */ >> >> unsigned int feature_support; >> @@ -229,6 +233,9 @@ struct mmc_card { >> #define MMC_CARD_REMOVED (1<<7) /* card has been removed */ >> #define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 >> mode */ >> #define MMC_STATE_SLEEP (1<<9) /* card is in sleep >> state */ >> +#define MMC_STATE_NEED_BKOPS (1<<10) /* card need to do BKOPS */ >> +#define MMC_STATE_DOING_BKOPS (1<<11) /* card is doing BKOPS */ >> +#define MMC_STATE_CHECK_BKOPS (1<<12) /* card need to check BKOPS >> */ >> unsigned int quirks; /* card quirks */ >> #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes >> outside of the VS CCCR range */ >> #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ >> @@ -400,6 +407,9 @@ static inline void __maybe_unused remove_quirk(struct >> mmc_card *card, int data) >> #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC) >> #define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED)) >> #define mmc_card_is_sleep(c) ((c)->state & MMC_STATE_SLEEP) >> +#define mmc_card_need_bkops(c) ((c)->state & MMC_STATE_NEED_BKOPS) >> +#define mmc_card_doing_bkops(c) ((c)->state & MMC_STATE_DOING_BKOPS) >> +#define mmc_card_check_bkops(c) ((c)->state & MMC_STATE_CHECK_BKOPS) >> >> #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) >> #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) >> @@ -412,7 +422,13 @@ static inline void __maybe_unused remove_quirk(struct >> mmc_card *card, int data) >> #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) >> #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED) >> #define mmc_card_set_sleep(c) ((c)->state |= MMC_STATE_SLEEP) >> +#define mmc_card_set_need_bkops(c) ((c)->state |= MMC_STATE_NEED_BKOPS) >> +#define mmc_card_set_doing_bkops(c) ((c)->state |= MMC_STATE_DOING_BKOPS) >> +#define mmc_card_set_check_bkops(c) ((c)->state |= MMC_STATE_CHECK_BKOPS) >> >> +#define mmc_card_clr_need_bkops(c) ((c)->state &= ~MMC_STATE_NEED_BKOPS) >> +#define mmc_card_clr_doing_bkops(c) ((c)->state &= >> ~MMC_STATE_DOING_BKOPS) >> +#define mmc_card_clr_check_bkops(c) ((c)->state &= ~MMC_STATE_CHECK_BKOPS) >> #define mmc_card_clr_sleep(c) ((c)->state &= ~MMC_STATE_SLEEP) >> /* >> * Quirk add/remove for MMC products. >> diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h >> index d787037..fa5641d 100644 >> --- a/include/linux/mmc/core.h >> +++ b/include/linux/mmc/core.h >> @@ -137,6 +137,9 @@ struct mmc_host; >> struct mmc_card; >> struct mmc_async_req; >> >> +extern int mmc_stop_bkops(struct mmc_card *); >> +extern int mmc_read_bkops_status(struct mmc_card *); >> +extern int mmc_is_exception_event(struct mmc_card *, unsigned int); >> extern struct mmc_async_req *mmc_start_req(struct mmc_host *, >> struct mmc_async_req *, int *); >> extern int mmc_interrupt_hpi(struct mmc_card *); >> @@ -145,6 +148,8 @@ extern int mmc_wait_for_cmd(struct mmc_host *, struct >> mmc_command *, int); >> extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *); >> extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *, >> struct mmc_command *, int); >> +extern void mmc_start_bkops(struct mmc_card *card); >> +extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, u8); >> extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int); >> extern int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd); >> >> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h >> index 79d8921..35b7ce8 100644 >> --- a/include/linux/mmc/host.h >> +++ b/include/linux/mmc/host.h >> @@ -273,7 +273,7 @@ struct mmc_host { >> #define MMC_CAP2_PACKED_WR (1 << 21) /* Allow packed write */ >> #define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \ >> MMC_CAP2_PACKED_WR) /* Allow packed >> commands */ >> - >> +#define MMC_CAP2_BKOPS (1 << 22) /* BKOPS supported */ >> mmc_pm_flag_t pm_caps; /* supported pm features */ >> unsigned int power_notify_type; >> #define MMC_HOST_PW_NOTIFY_NONE 0 >> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h >> index 254901a..e7396b4 100644 >> --- a/include/linux/mmc/mmc.h >> +++ b/include/linux/mmc/mmc.h >> @@ -285,6 +285,8 @@ struct _mmc_csd { >> #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ >> #define EXT_CSD_HPI_MGMT 161 /* R/W */ >> #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ >> +#define EXT_CSD_BKOPS_EN 163 /* R/W */ >> +#define EXT_CSD_BKOPS_START 164 /* W */ >> #define EXT_CSD_SANITIZE_START 165 /* W */ >> #define EXT_CSD_WR_REL_PARAM 166 /* RO */ >> #define EXT_CSD_BOOT_WP 173 /* R/W */ >> @@ -318,6 +320,7 @@ struct _mmc_csd { >> #define EXT_CSD_PWR_CL_200_360 237 /* RO */ >> #define EXT_CSD_PWR_CL_DDR_52_195 238 /* RO */ >> #define EXT_CSD_PWR_CL_DDR_52_360 239 /* RO */ >> +#define EXT_CSD_BKOPS_STATUS 246 /* RO */ >> #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ >> #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ >> #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ >> @@ -325,6 +328,7 @@ struct _mmc_csd { >> #define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ >> #define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */ >> #define EXT_CSD_MAX_PACKED_READS 501 /* RO */ >> +#define EXT_CSD_BKOPS_SUPPORT 502 /* RO */ >> #define EXT_CSD_HPI_FEATURES 503 /* RO */ >> >> /* >> @@ -387,12 +391,23 @@ struct _mmc_csd { >> >> #define EXT_CSD_PACKED_EVENT_EN (1 << 3) >> >> -#define EXT_CSD_PACKED_FAILURE (1 << 3) >> - >> #define EXT_CSD_PACKED_GENERIC_ERROR (1 << 0) >> #define EXT_CSD_PACKED_INDEXED_ERROR (1 << 1) >> >> /* >> + * EXCEPTION_EVENT_STATUS field (eMMC4.5) >> + */ >> +#define EXT_CSD_URGENT_BKOPS BIT(0) >> +#define EXT_CSD_DYNCAP_NEEDED BIT(1) >> +#define EXT_CSD_SYSPOOL_EXHAUSTED BIT(2) >> +#define EXT_CSD_PACKED_FAILURE BIT(3) >> + >> +/* >> + * BKOPS status level >> + */ >> +#define EXT_CSD_BKOPS_LEVEL_2 0x2 >> + >> +/* >> * MMC_SWITCH access modes >> */ >> >> -- >> 1.7.4.1 > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html