In IDMAC mode EVENT_XFER_COMPLETE is set when RI/TI of last descriptor
is done. So if errors are happened in the middle of data transfers,
'dw_mci_stop_dma' during error handing can be called and eventually
prevents this flag to be set.
This results in permanent wait for EVENT_XFER_COMPLETE in 'dw_mci_tasklet_func'.
Therefore, if dma running is stopped forcibly, EVENT_XFER_COMPLETE should be
set.
Reported-by: Bing Zhao <bz...@marvell.com>
Signed-off-by: Doug Anderson <diand...@chromium.org>
Signed-off-by: Seungwon Jeon <tgih....@samsung.com>
---
drivers/mmc/host/dw_mmc.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 8c1926f..5b52ac1 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -345,10 +345,10 @@ static void dw_mci_stop_dma(struct dw_mci *host)
if (host->using_dma) {
host->dma_ops->stop(host);
host->dma_ops->cleanup(host);
- } else {
- /* Data transfer was stopped by the interrupt handler */
- set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
}
+
+ /* Data transfer was stopped by the interrupt handler */
+ set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
}
static int dw_mci_get_dma_dir(struct mmc_data *data)
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
