On Tue, 22 Oct 2013, Ulf Hansson wrote:

> Previously only clk_enable|disable were being used. Adapt properly
> to the clock API, by also using clk_prepare|unprepare.
> 
> Cc: Guennadi Liakhovetski <g.liakhovet...@gmx.de>
> Signed-off-by: Ulf Hansson <ulf.hans...@linaro.org>

Acked-by: Guennadi Liakhovetski <g.liakhovet...@gmx.de>

Note, that Laurent has later submitted a (simingly) identical patch, but 
since yours was the first one, we should use this one really.

Thanks
Guennadi

> ---
>  drivers/mmc/host/sh_mmcif.c |   12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
> index 32bc412..d032b08 100644
> --- a/drivers/mmc/host/sh_mmcif.c
> +++ b/drivers/mmc/host/sh_mmcif.c
> @@ -964,7 +964,7 @@ static void sh_mmcif_request(struct mmc_host *mmc, struct 
> mmc_request *mrq)
>  
>  static int sh_mmcif_clk_update(struct sh_mmcif_host *host)
>  {
> -     int ret = clk_enable(host->hclk);
> +     int ret = clk_prepare_enable(host->hclk);
>  
>       if (!ret) {
>               host->clk = clk_get_rate(host->hclk);
> @@ -1018,7 +1018,7 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, 
> struct mmc_ios *ios)
>               }
>               if (host->power) {
>                       pm_runtime_put_sync(&host->pd->dev);
> -                     clk_disable(host->hclk);
> +                     clk_disable_unprepare(host->hclk);
>                       host->power = false;
>                       if (ios->power_mode == MMC_POWER_OFF)
>                               sh_mmcif_set_power(host, ios);
> @@ -1466,7 +1466,7 @@ static int sh_mmcif_probe(struct platform_device *pdev)
>  
>       mutex_init(&host->thread_lock);
>  
> -     clk_disable(host->hclk);
> +     clk_disable_unprepare(host->hclk);
>       ret = mmc_add_host(mmc);
>       if (ret < 0)
>               goto emmcaddh;
> @@ -1487,7 +1487,7 @@ ereqirq1:
>  ereqirq0:
>       pm_runtime_suspend(&pdev->dev);
>  eresume:
> -     clk_disable(host->hclk);
> +     clk_disable_unprepare(host->hclk);
>  eclkupdate:
>       clk_put(host->hclk);
>  eclkget:
> @@ -1505,7 +1505,7 @@ static int sh_mmcif_remove(struct platform_device *pdev)
>       int irq[2];
>  
>       host->dying = true;
> -     clk_enable(host->hclk);
> +     clk_prepare_enable(host->hclk);
>       pm_runtime_get_sync(&pdev->dev);
>  
>       dev_pm_qos_hide_latency_limit(&pdev->dev);
> @@ -1530,7 +1530,7 @@ static int sh_mmcif_remove(struct platform_device *pdev)
>       if (irq[1] >= 0)
>               free_irq(irq[1], host);
>  
> -     clk_disable(host->hclk);
> +     clk_disable_unprepare(host->hclk);
>       mmc_free_host(host->mmc);
>       pm_runtime_put_sync(&pdev->dev);
>       pm_runtime_disable(&pdev->dev);
> -- 
> 1.7.9.5
> 

---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to