Add SD/MMC driver for MOXA ART SoCs. The "MOXA ART MMC controller" is likely a faraday "ftsdc010", a controller with support in U-Boot:
http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/mmc/ftsdc010_mci.c Signed-off-by: Jonas Jensen <jonas.jen...@gmail.com> --- Notes: This has been cleaned up further, especially the return value fiasco in v7. The "MOXA ART MMC controller" is likely a faraday "ftsdc010" (supported by U-Boot [1]). Registers are the same albeit named slightly different. I think this can support other "ftsdc010" SoCs with one reservation for power control, which may need hardware specific changes. Changes since v7: 1. merge code from U-Boot "ftsdc010" driver [1] Specifically how it implements status wait, clock divider, fifo width, bus width. 2. return value cleanup, MMC_ERR_TIMEOUT is no longer used or set at the top of every request i.e. the default (no error) return value (0) is respected. Error is only set on actual error, "MMC_ERR_NONE" is no longer used. 3. FIFO size is now read from register (and respected during PIO transfer) 4. supported bus width(s) is now read from register 5. !(of_dma_request_slave_channel()) return value check is wrong, IS_ERR() must be used. 6. clean up and remove unused defines / header includes 7. add "faraday,ftsdc010" compatible string (requested by Arnd) [1] http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/mmc/ftsdc010_mci.c Applies to next-20140409 .../devicetree/bindings/mmc/moxa,moxart-mmc.txt | 30 + drivers/mmc/host/Kconfig | 9 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/moxart-mmc.c | 730 +++++++++++++++++++++ 4 files changed, 770 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt create mode 100644 drivers/mmc/host/moxart-mmc.c diff --git a/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt new file mode 100644 index 0000000..b638191 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt @@ -0,0 +1,30 @@ +MOXA ART MMC Host Controller Interface + + Inherits from mmc binding[1]. + + [1] Documentation/devicetree/bindings/mmc/mmc.txt + +Required properties: + +- compatible : Must be "moxa,moxart-mmc" or "faraday,ftsdc010" +- reg : Should contain registers location and length +- interrupts : Should contain the interrupt number +- clocks : Should contain phandle for the clock feeding the MMC controller + +Optional properties: + +- dmas : Should contain two DMA channels, line request number must be 5 for + both channels +- dma-names : Must be "tx", "rx" + +Example: + + mmc: mmc@98e00000 { + compatible = "moxa,moxart-mmc"; + reg = <0x98e00000 0x5C>; + interrupts = <5 0>; + clocks = <&clk_apb>; + dmas = <&dma 5>, + <&dma 5>; + dma-names = "tx", "rx"; + }; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 8aaf8c1..eb93b81 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -283,6 +283,15 @@ config MMC_SDHCI_BCM2835 If unsure, say N. +config MMC_MOXART + tristate "MOXART SD/MMC Host Controller support" + depends on ARCH_MOXART && MMC + help + This selects support for the MOXART SD/MMC Host Controller. + MOXA provides one multi-functional card reader which can + be found on some embedded hardware such as UC-7112-LX. + If you have a controller with this interface, say Y here. + config MMC_OMAP tristate "TI OMAP Multimedia Card Interface support" depends on ARCH_OMAP diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 0c8aa5e..dfa6ecb 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o obj-$(CONFIG_MMC_VUB300) += vub300.o obj-$(CONFIG_MMC_USHC) += ushc.o obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o +obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c new file mode 100644 index 0000000..74924a0 --- /dev/null +++ b/drivers/mmc/host/moxart-mmc.c @@ -0,0 +1,730 @@ +/* + * MOXA ART MMC host driver. + * + * Copyright (C) 2014 Jonas Jensen + * + * Jonas Jensen <jonas.jen...@gmail.com> + * + * Based on code from + * Moxa Technologies Co., Ltd. <www.moxa.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/blkdev.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sd.h> +#include <linux/sched.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/clk.h> +#include <linux/bitops.h> +#include <linux/of_dma.h> +#include <linux/spinlock.h> + +#define REG_COMMAND 0 +#define REG_ARGUMENT 4 +#define REG_RESPONSE0 8 +#define REG_RESPONSE1 12 +#define REG_RESPONSE2 16 +#define REG_RESPONSE3 20 +#define REG_RESPONSE_COMMAND 24 +#define REG_DATA_CONTROL 28 +#define REG_DATA_TIMER 32 +#define REG_DATA_LENGTH 36 +#define REG_STATUS 40 +#define REG_CLEAR 44 +#define REG_INTERRUPT_MASK 48 +#define REG_POWER_CONTROL 52 +#define REG_CLOCK_CONTROL 56 +#define REG_BUS_WIDTH 60 +#define REG_DATA_WINDOW 64 +#define REG_FEATURE 68 +#define REG_REVISION 72 + +/* REG_COMMAND */ +#define CMD_SDC_RESET BIT(10) +#define CMD_EN BIT(9) +#define CMD_APP_CMD BIT(8) +#define CMD_LONG_RSP BIT(7) +#define CMD_NEED_RSP BIT(6) +#define CMD_IDX_MASK 0x3f + +/* REG_RESPONSE_COMMAND */ +#define RSP_CMD_APP BIT(6) +#define RSP_CMD_IDX_MASK 0x3f + +/* REG_DATA_CONTROL */ +#define DCR_DATA_FIFO_RESET BIT(8) +#define DCR_DATA_THRES BIT(7) +#define DCR_DATA_EN BIT(6) +#define DCR_DMA_EN BIT(5) +#define DCR_DATA_WRITE BIT(4) +#define DCR_BLK_SIZE 0x0f + +/* REG_DATA_LENGTH */ +#define DATA_LEN_MASK 0xffffff + +/* REG_STATUS */ +#define WRITE_PROT BIT(12) +#define CARD_DETECT BIT(11) +/* 1-10 below can be sent to either registers, interrupt or clear. */ +#define CARD_CHANGE BIT(10) +#define FIFO_ORUN BIT(9) +#define FIFO_URUN BIT(8) +#define DATA_END BIT(7) +#define CMD_SENT BIT(6) +#define DATA_CRC_OK BIT(5) +#define RSP_CRC_OK BIT(4) +#define DATA_TIMEOUT BIT(3) +#define RSP_TIMEOUT BIT(2) +#define DATA_CRC_FAIL BIT(1) +#define RSP_CRC_FAIL BIT(0) + +#define MASK_RSP (RSP_TIMEOUT | RSP_CRC_FAIL | \ + RSP_CRC_OK | CARD_DETECT | CMD_SENT) + +#define MASK_DATA (DATA_CRC_OK | DATA_END | \ + DATA_CRC_FAIL | DATA_TIMEOUT) + +#define MASK_INTR_PIO (FIFO_URUN | FIFO_ORUN | CARD_CHANGE) + +/* REG_POWER_CONTROL */ +#define SD_POWER_ON BIT(4) +#define SD_POWER_MASK 0x0f + +/* REG_CLOCK_CONTROL */ +#define CLK_HISPD BIT(9) +#define CLK_OFF BIT(8) +#define CLK_SD BIT(7) +#define CLK_DIV_MASK 0x7f + +/* REG_BUS_WIDTH */ +#define BUS_WIDTH_8 BIT(2) +#define BUS_WIDTH_4 BIT(1) +#define BUS_WIDTH_1 BIT(0) + +#define MMC_VDD_360 23 +#define MIN_POWER (MMC_VDD_360 - SD_POWER_MASK) +#define MAX_RETRIES 500000 + +struct moxart_host { + spinlock_t lock; + + void __iomem *base; + + phys_addr_t reg_phys; + + struct dma_chan *dma_chan_tx; + struct dma_chan *dma_chan_rx; + struct dma_async_tx_descriptor *tx_desc; + struct mmc_host *mmc; + struct mmc_request *mrq; + struct scatterlist *cur_sg; + struct completion dma_complete; + struct completion pio_complete; + + u32 num_sg; + u32 data_remain; + u32 data_len; + u32 fifo_width; + u32 timeout; + u32 rate; + + long sysclk; + + bool have_dma; + bool is_removed; +}; + +static inline void moxart_init_sg(struct moxart_host *host, + struct mmc_data *data) +{ + host->cur_sg = data->sg; + host->num_sg = data->sg_len; + host->data_remain = host->cur_sg->length; + + if (host->data_remain > host->data_len) + host->data_remain = host->data_len; +} + +static inline int moxart_next_sg(struct moxart_host *host) +{ + int remain; + struct mmc_data *data = host->mrq->cmd->data; + + host->cur_sg++; + host->num_sg--; + + if (host->num_sg > 0) { + host->data_remain = host->cur_sg->length; + remain = host->data_len - data->bytes_xfered; + if (remain > 0 && remain < host->data_remain) + host->data_remain = remain; + } + + return host->num_sg; +} + +static int moxart_wait_for_status(struct moxart_host *host, + u32 mask, u32 *status) +{ + int ret = -ETIMEDOUT; + u32 i; + + for (i = 0; i < MAX_RETRIES; i++) { + *status = readl(host->base + REG_STATUS); + if (!(*status & mask)) { + udelay(5); + continue; + } + writel(*status & mask, host->base + REG_CLEAR); + ret = 0; + break; + } + + if (ret) + dev_err(mmc_dev(host->mmc), "timed out waiting for status\n"); + + return ret; +} + + +static void moxart_send_command(struct moxart_host *host, + struct mmc_command *cmd) +{ + u32 status, cmdctrl; + + writel(RSP_TIMEOUT | RSP_CRC_OK | + RSP_CRC_FAIL | CMD_SENT, host->base + REG_CLEAR); + writel(cmd->arg, host->base + REG_ARGUMENT); + + cmdctrl = cmd->opcode & CMD_IDX_MASK; + if (cmdctrl == SD_APP_SET_BUS_WIDTH || cmdctrl == SD_APP_OP_COND || + cmdctrl == SD_APP_SEND_SCR || cmdctrl == SD_APP_SD_STATUS || + cmdctrl == SD_APP_SEND_NUM_WR_BLKS) + cmdctrl |= CMD_APP_CMD; + + if (cmd->flags & MMC_RSP_PRESENT) + cmdctrl |= CMD_NEED_RSP; + + if (cmd->flags & MMC_RSP_136) + cmdctrl |= CMD_LONG_RSP; + + writel(cmdctrl | CMD_EN, host->base + REG_COMMAND); + + if (moxart_wait_for_status(host, MASK_RSP, &status) == -ETIMEDOUT) + cmd->error = -ETIMEDOUT; + + if (status & RSP_TIMEOUT) { + cmd->error = -ETIMEDOUT; + return; + } + if (status & RSP_CRC_FAIL) { + cmd->error = -EIO; + return; + } + if (status & RSP_CRC_OK) { + if (cmd->flags & MMC_RSP_136) { + cmd->resp[3] = readl(host->base + REG_RESPONSE0); + cmd->resp[2] = readl(host->base + REG_RESPONSE1); + cmd->resp[1] = readl(host->base + REG_RESPONSE2); + cmd->resp[0] = readl(host->base + REG_RESPONSE3); + } else { + cmd->resp[0] = readl(host->base + REG_RESPONSE0); + } + } +} + +static void moxart_dma_complete(void *param) +{ + struct moxart_host *host = param; + + complete(&host->dma_complete); +} + +static void moxart_transfer_dma(struct mmc_data *data, struct moxart_host *host) +{ + u32 len, dir_data, dir_slave; + unsigned long dma_time; + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *dma_chan; + + if (host->data_len == data->bytes_xfered) + return; + + if (data->flags & MMC_DATA_WRITE) { + dma_chan = host->dma_chan_tx; + dir_data = DMA_TO_DEVICE; + dir_slave = DMA_MEM_TO_DEV; + } else { + dma_chan = host->dma_chan_rx; + dir_data = DMA_FROM_DEVICE; + dir_slave = DMA_DEV_TO_MEM; + } + + len = dma_map_sg(dma_chan->device->dev, data->sg, + data->sg_len, dir_data); + + if (len > 0) { + desc = dmaengine_prep_slave_sg(dma_chan, data->sg, + len, dir_slave, + DMA_PREP_INTERRUPT | + DMA_CTRL_ACK); + } else { + dev_err(mmc_dev(host->mmc), "dma_map_sg returned zero length\n"); + } + + if (desc) { + host->tx_desc = desc; + desc->callback = moxart_dma_complete; + desc->callback_param = host; + dmaengine_submit(desc); + dma_async_issue_pending(dma_chan); + } + + data->bytes_xfered += host->data_remain; + + dma_time = wait_for_completion_interruptible_timeout( + &host->dma_complete, host->timeout); + + dma_unmap_sg(dma_chan->device->dev, + data->sg, data->sg_len, + dir_data); +} + + +static void moxart_transfer_pio(struct moxart_host *host) +{ + struct mmc_data *data = host->mrq->cmd->data; + u32 *sgp, len = 0, remain, status; + + if (host->data_len == data->bytes_xfered) + return; + + sgp = sg_virt(host->cur_sg); + remain = host->data_remain; + + if (data->flags & MMC_DATA_WRITE) { + while (remain > 0) { + if (moxart_wait_for_status(host, FIFO_URUN, &status) + == -ETIMEDOUT) { + data->error = -ETIMEDOUT; + complete(&host->pio_complete); + return; + } + for (len = 0; len < remain && len < host->fifo_width;) { + iowrite32(*sgp, host->base + REG_DATA_WINDOW); + sgp++; + len += 4; + } + remain -= len; + } + + } else { + while (remain > 0) { + if (moxart_wait_for_status(host, FIFO_ORUN, &status) + == -ETIMEDOUT) { + data->error = -ETIMEDOUT; + complete(&host->pio_complete); + return; + } + for (len = 0; len < remain && len < host->fifo_width;) { + /* SCR data must be read in big endian. */ + if (data->mrq->cmd->opcode == SD_APP_SEND_SCR) + *sgp = ioread32be(host->base + + REG_DATA_WINDOW); + else + *sgp = ioread32(host->base + + REG_DATA_WINDOW); + sgp++; + len += 4; + } + remain -= len; + } + } + + data->bytes_xfered += host->data_remain - remain; + host->data_remain = remain; + + if (host->data_len != data->bytes_xfered) + moxart_next_sg(host); + else + complete(&host->pio_complete); +} + +static void moxart_prepare_data(struct moxart_host *host) +{ + struct mmc_data *data = host->mrq->cmd->data; + u32 datactrl; + int blksz_bits; + + if (!data) + return; + + host->data_len = data->blocks * data->blksz; + blksz_bits = ffs(data->blksz) - 1; + BUG_ON(1 << blksz_bits != data->blksz); + + moxart_init_sg(host, data); + + datactrl = DCR_DATA_EN | (blksz_bits & DCR_BLK_SIZE); + + if (data->flags & MMC_DATA_WRITE) + datactrl |= DCR_DATA_WRITE; + + if ((host->data_len > host->fifo_width) && host->have_dma) + datactrl |= DCR_DMA_EN; + + writel(DCR_DATA_FIFO_RESET, host->base + REG_DATA_CONTROL); + writel(MASK_DATA | FIFO_URUN | FIFO_ORUN, host->base + REG_CLEAR); + writel(host->rate, host->base + REG_DATA_TIMER); + writel(host->data_len, host->base + REG_DATA_LENGTH); + writel(datactrl, host->base + REG_DATA_CONTROL); +} + +static void moxart_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct moxart_host *host = mmc_priv(mmc); + unsigned long pio_time, flags; + u32 status; + + spin_lock_irqsave(&host->lock, flags); + + init_completion(&host->dma_complete); + init_completion(&host->pio_complete); + + host->mrq = mrq; + + if (readl(host->base + REG_STATUS) & CARD_DETECT) { + mrq->cmd->error = -ETIMEDOUT; + goto request_done; + } + + moxart_prepare_data(host); + moxart_send_command(host, host->mrq->cmd); + + if (mrq->cmd->data) { + if ((host->data_len > host->fifo_width) && host->have_dma) { + + writel(CARD_CHANGE, host->base + REG_INTERRUPT_MASK); + + spin_unlock_irqrestore(&host->lock, flags); + + moxart_transfer_dma(mrq->cmd->data, host); + + spin_lock_irqsave(&host->lock, flags); + } else { + + writel(MASK_INTR_PIO, host->base + REG_INTERRUPT_MASK); + + spin_unlock_irqrestore(&host->lock, flags); + + /* PIO transfers start from interrupt. */ + pio_time = wait_for_completion_interruptible_timeout( + &host->pio_complete, host->timeout); + + spin_lock_irqsave(&host->lock, flags); + } + + if (host->is_removed) { + dev_err(mmc_dev(host->mmc), "card removed\n"); + mrq->cmd->error = -ETIMEDOUT; + goto request_done; + } + + if (moxart_wait_for_status(host, MASK_DATA, &status) + == -ETIMEDOUT) { + mrq->cmd->data->error = -ETIMEDOUT; + goto request_done; + } + + if (status & DATA_CRC_FAIL) + mrq->cmd->data->error = -ETIMEDOUT; + + if (mrq->cmd->data->stop) + moxart_send_command(host, mrq->cmd->data->stop); + } + +request_done: + spin_unlock_irqrestore(&host->lock, flags); + mmc_request_done(host->mmc, mrq); +} + +static irqreturn_t moxart_irq(int irq, void *devid) +{ + struct moxart_host *host = (struct moxart_host *)devid; + u32 status; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + status = readl(host->base + REG_STATUS); + if (status & CARD_CHANGE) { + host->is_removed = status & CARD_DETECT; + if (host->is_removed && host->have_dma) { + dmaengine_terminate_all(host->dma_chan_tx); + dmaengine_terminate_all(host->dma_chan_rx); + } + host->mrq = NULL; + writel(MASK_INTR_PIO, host->base + REG_CLEAR); + writel(CARD_CHANGE, host->base + REG_INTERRUPT_MASK); + mmc_detect_change(host->mmc, 0); + } + if (status & (FIFO_ORUN | FIFO_URUN) && host->mrq) + moxart_transfer_pio(host); + + spin_unlock_irqrestore(&host->lock, flags); + + return IRQ_HANDLED; +} + +static void moxart_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct moxart_host *host = mmc_priv(mmc); + unsigned long flags; + u8 power, div; + u32 ctrl; + + spin_lock_irqsave(&host->lock, flags); + + if (ios->clock) { + for (div = 0; div < CLK_DIV_MASK; ++div) { + if (ios->clock >= host->sysclk / (2 * (div + 1))) + break; + } + ctrl = CLK_SD | div; + host->rate = host->sysclk / (2 * (div + 1)); + if (host->rate > host->sysclk) + ctrl |= CLK_HISPD; + writel(ctrl, host->base + REG_CLOCK_CONTROL); + } + + if (ios->power_mode == MMC_POWER_OFF) { + writel(readl(host->base + REG_POWER_CONTROL) & ~SD_POWER_ON, + host->base + REG_POWER_CONTROL); + } else { + if (ios->vdd < MIN_POWER) + power = 0; + else + power = ios->vdd - MIN_POWER; + + writel(SD_POWER_ON | (u32) power, + host->base + REG_POWER_CONTROL); + } + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_4: + writel(BUS_WIDTH_4, host->base + REG_BUS_WIDTH); + break; + case MMC_BUS_WIDTH_8: + writel(BUS_WIDTH_8, host->base + REG_BUS_WIDTH); + break; + default: + writel(BUS_WIDTH_1, host->base + REG_BUS_WIDTH); + break; + } + + spin_unlock_irqrestore(&host->lock, flags); +} + + +static int moxart_get_ro(struct mmc_host *mmc) +{ + struct moxart_host *host = mmc_priv(mmc); + + return !!(readl(host->base + REG_STATUS) & WRITE_PROT); +} + +static struct mmc_host_ops moxart_ops = { + .request = moxart_request, + .set_ios = moxart_set_ios, + .get_ro = moxart_get_ro, +}; + +static int moxart_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct resource res_mmc; + struct mmc_host *mmc; + struct moxart_host *host = NULL; + struct dma_slave_config cfg; + struct clk *clk; + void __iomem *reg_mmc; + dma_cap_mask_t mask; + int irq, ret; + u32 i; + + mmc = mmc_alloc_host(sizeof(struct moxart_host), dev); + if (!mmc) { + dev_err(dev, "mmc_alloc_host failed\n"); + ret = -ENOMEM; + goto out; + } + + ret = of_address_to_resource(node, 0, &res_mmc); + if (ret) { + dev_err(dev, "of_address_to_resource failed\n"); + goto out; + } + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) { + dev_err(dev, "irq_of_parse_and_map failed\n"); + ret = -EINVAL; + goto out; + } + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) { + dev_err(dev, "of_clk_get failed\n"); + ret = PTR_ERR(clk); + goto out; + } + + reg_mmc = devm_ioremap_resource(dev, &res_mmc); + if (IS_ERR(reg_mmc)) { + ret = PTR_ERR(reg_mmc); + goto out; + } + + mmc_of_parse(mmc); + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host = mmc_priv(mmc); + host->mmc = mmc; + host->base = reg_mmc; + host->reg_phys = res_mmc.start; + host->timeout = msecs_to_jiffies(1000); + host->sysclk = clk_get_rate(clk); + host->fifo_width = readl(host->base + REG_FEATURE) << 2; + host->dma_chan_tx = of_dma_request_slave_channel(node, "tx"); + host->dma_chan_rx = of_dma_request_slave_channel(node, "rx"); + + spin_lock_init(&host->lock); + + mmc->ops = &moxart_ops; + mmc->f_max = DIV_ROUND_CLOSEST(host->sysclk, 2); + mmc->f_min = DIV_ROUND_CLOSEST(host->sysclk, CLK_DIV_MASK * 2); + mmc->ocr_avail = 0xffff00; /* Support 2.0v - 3.6v power. */ + + if (IS_ERR(host->dma_chan_tx) || IS_ERR(host->dma_chan_rx)) { + dev_dbg(dev, "PIO mode transfer enabled\n"); + host->have_dma = false; + } else { + dev_dbg(dev, "DMA channels found (%p,%p)\n", + host->dma_chan_tx, host->dma_chan_rx); + host->have_dma = true; + + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + + cfg.direction = DMA_MEM_TO_DEV; + cfg.src_addr = 0; + cfg.dst_addr = host->reg_phys + REG_DATA_WINDOW; + dmaengine_slave_config(host->dma_chan_tx, &cfg); + + cfg.direction = DMA_DEV_TO_MEM; + cfg.src_addr = host->reg_phys + REG_DATA_WINDOW; + cfg.dst_addr = 0; + dmaengine_slave_config(host->dma_chan_rx, &cfg); + } + + switch ((readl(host->base + REG_BUS_WIDTH) >> 3) & 3) { + case 1: + mmc->caps |= MMC_CAP_4_BIT_DATA; + break; + case 2: + mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; + break; + default: + break; + } + + writel(0, host->base + REG_INTERRUPT_MASK); + + writel(CMD_SDC_RESET, host->base + REG_COMMAND); + for (i = 0; i < MAX_RETRIES; i++) { + if (!(readl(host->base + REG_COMMAND) & CMD_SDC_RESET)) + break; + udelay(5); + } + + ret = devm_request_irq(dev, irq, moxart_irq, 0, "moxart-mmc", host); + if (ret) + goto out; + + dev_set_drvdata(dev, mmc); + mmc_add_host(mmc); + + dev_dbg(dev, "IRQ=%d, FIFO is %d bytes\n", irq, host->fifo_width); + + return 0; + +out: + if (mmc) + mmc_free_host(mmc); + return ret; +} + +static int moxart_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = dev_get_drvdata(&pdev->dev); + struct moxart_host *host = mmc_priv(mmc); + + dev_set_drvdata(&pdev->dev, NULL); + + if (mmc) { + if (!IS_ERR(host->dma_chan_tx)) + dma_release_channel(host->dma_chan_tx); + if (!IS_ERR(host->dma_chan_rx)) + dma_release_channel(host->dma_chan_rx); + mmc_remove_host(mmc); + mmc_free_host(mmc); + + writel(0, host->base + REG_INTERRUPT_MASK); + writel(0, host->base + REG_POWER_CONTROL); + writel(readl(host->base + REG_CLOCK_CONTROL) | CLK_OFF, + host->base + REG_CLOCK_CONTROL); + } + + kfree(host); + + return 0; +} + +static const struct of_device_id moxart_mmc_match[] = { + { .compatible = "moxa,moxart-mmc" }, + { .compatible = "faraday,ftsdc010" }, + { } +}; + +static struct platform_driver moxart_mmc_driver = { + .probe = moxart_probe, + .remove = moxart_remove, + .driver = { + .name = "mmc-moxart", + .owner = THIS_MODULE, + .of_match_table = moxart_mmc_match, + }, +}; +module_platform_driver(moxart_mmc_driver); + +MODULE_ALIAS("platform:mmc-moxart"); +MODULE_DESCRIPTION("MOXA ART MMC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Jonas Jensen <jonas.jen...@gmail.com>"); -- 1.8.2.1 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
