Hi Avi. Could you fix the line wrap?
Best Regards, Jaehoon Chung On 04/12/2014 03:39 AM, Avi Shchislowski wrote: > Change the patch version number from V4 to v5 > The Field Firmware Update (FFU) feature is new for eMMC 5.0 spec > (Jedec: JESD84-B50.pdf) > > http://www.jedec.org/standards-documents/technology-focus-areas/flash-memory-ssds-ufs-emmc/e-mmc > > An ioctl has been added to provide the new firmware image's file name to the > mmc driver and udev is then used to retrieve its data. > > Two new ioctls have been added: > 1. FFU download firmware - transfer the new firmware data from user space to > the eMMC device 2. FFU install - initializes the new firmware update > > This patch version (V5) provides udev (request_firmware) implementation as > advised in patch v2 comments. > > Signed-off-by: Avi Shchislowski <avi.shchislow...@sandisk.com> > Signed-off-by: Alex Lemberg <alex.lemb...@sandisk.com> > > diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig index > 5562308..19ba729 100644 > --- a/drivers/mmc/card/Kconfig > +++ b/drivers/mmc/card/Kconfig > @@ -68,3 +68,11 @@ config MMC_TEST > > This driver is only of interest to those developing or > testing a host driver. Most people should say N here. > + > +config MMC_FFU > + bool "FFU SUPPORT" > + depends on MMC != n > + help > + This is an option to run firmware update on eMMC 5.0. > + Field firmware updates (FFU) enables features enhancment > + in the field. > diff --git a/drivers/mmc/card/Makefile b/drivers/mmc/card/Makefile index > c73b406..1e9223b 100644 > --- a/drivers/mmc/card/Makefile > +++ b/drivers/mmc/card/Makefile > @@ -8,3 +8,4 @@ obj-$(CONFIG_MMC_TEST) += mmc_test.o > > obj-$(CONFIG_SDIO_UART) += sdio_uart.o > > +obj-$(CONFIG_MMC_FFU) += ffu.o > diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index > 7b5424f..8311200 100644 > --- a/drivers/mmc/card/block.c > +++ b/drivers/mmc/card/block.c > @@ -41,6 +41,7 @@ > #include <linux/mmc/host.h> > #include <linux/mmc/mmc.h> > #include <linux/mmc/sd.h> > +#include <linux/mmc/ffu.h> > > #include <asm/uaccess.h> > > @@ -525,6 +526,17 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev, > > mmc_get_card(card); > > + if (cmd.opcode == MMC_FFU_DOWNLOAD_OP) { > + err = mmc_ffu_download(card, &cmd , idata->buf, > + idata->buf_bytes); > + goto cmd_rel_host; > + } > + > + if (cmd.opcode == MMC_FFU_INSTALL_OP) { > + err = mmc_ffu_install(card); > + goto cmd_rel_host; > + } > + > err = mmc_blk_part_switch(card, md); > if (err) > goto cmd_rel_host; > diff --git a/drivers/mmc/card/ffu.c b/drivers/mmc/card/ffu.c new file mode > 100644 index 0000000..7d254fd > --- /dev/null > +++ b/drivers/mmc/card/ffu.c > @@ -0,0 +1,595 @@ > +/* > + * * ffu.c > + * > + * Copyright 2007-2008 Pierre Ossman > + * > + * Modified by SanDisk Corp., Copyright (c) 2013 SanDisk Corp. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > +(at > + * your option) any later version. > + * > + * This program includes bug.h, card.h, host.h, mmc.h, scatterlist.h, > + * slab.h, ffu.h & swap.h header files > + * The original, unmodified version of this program - the mmc_test.c > + * file - is obtained under the GPL v2.0 license that is available via > + * http://www.gnu.org/licenses/, > + * or http://www.opensource.org/licenses/gpl-2.0.php > +*/ > + > +#include <linux/bug.h> > +#include <linux/errno.h> > +#include <linux/mmc/card.h> > +#include <linux/mmc/host.h> > +#include <linux/mmc/mmc.h> > +#include <linux/scatterlist.h> > +#include <linux/slab.h> > +#include <linux/swap.h> > +#include <linux/mmc/ffu.h> > +#include <linux/firmware.h> > + > +/** > + * struct mmc_ffu_pages - pages allocated by 'alloc_pages()'. > + * @page: first page in the allocation > + * @order: order of the number of pages allocated */ struct > +mmc_ffu_pages { > + struct page *page; > + unsigned int order; > +}; > + > +/** > + * struct mmc_ffu_mem - allocated memory. > + * @arr: array of allocations > + * @cnt: number of allocations > + */ > +struct mmc_ffu_mem { > + struct mmc_ffu_pages *arr; > + unsigned int cnt; > +}; > + > +struct mmc_ffu_area { > + unsigned long max_sz; > + unsigned int max_tfr; > + unsigned int max_segs; > + unsigned int max_seg_sz; > + unsigned int blocks; > + unsigned int sg_len; > + struct mmc_ffu_mem *mem; > + struct scatterlist *sg; > +}; > + > +static void mmc_ffu_prepare_mrq(struct mmc_card *card, > + struct mmc_request *mrq, struct scatterlist *sg, unsigned int sg_len, > + u32 arg, unsigned int blocks, unsigned int blksz, int write) { > + BUG_ON(!mrq || !mrq->cmd || !mrq->data || !mrq->stop); > + > + if (blocks > 1) { > + mrq->cmd->opcode = write ? > + MMC_WRITE_MULTIPLE_BLOCK : MMC_READ_MULTIPLE_BLOCK; > + } else { > + mrq->cmd->opcode = write ? MMC_WRITE_BLOCK : > + MMC_READ_SINGLE_BLOCK; > + } > + > + mrq->cmd->arg = arg; > + if (!mmc_card_blockaddr(card)) > + mrq->cmd->arg <<= 9; > + > + mrq->cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC; > + if (blocks == 1) { > + mrq->stop = NULL; > + } else { > + mrq->stop->opcode = MMC_STOP_TRANSMISSION; > + mrq->stop->arg = 0; > + mrq->stop->flags = MMC_RSP_R1B | MMC_CMD_AC; > + } > + > + mrq->data->blksz = blksz; > + mrq->data->blocks = blocks; > + mrq->data->flags = write ? MMC_DATA_WRITE : MMC_DATA_READ; > + mrq->data->sg = sg; > + mrq->data->sg_len = sg_len; > + > + mmc_set_data_timeout(mrq->data, card); } > + > +/* > + * Checks that a normal transfer didn't have any errors */ static int > +mmc_ffu_check_result(struct mmc_request *mrq) { > + BUG_ON(!mrq || !mrq->cmd || !mrq->data); > + > + if (mrq->cmd->error != 0) > + return -EINVAL; > + > + if (mrq->data->error != 0) > + return -EINVAL; > + > + if (mrq->stop != NULL && mrq->stop->error != 0) > + return -1; > + > + if (mrq->data->bytes_xfered != (mrq->data->blocks * mrq->data->blksz)) > + return -EINVAL; > + > + return 0; > +} > + > +static int mmc_ffu_busy(struct mmc_command *cmd) { > + return !(cmd->resp[0] & R1_READY_FOR_DATA) || > + (R1_CURRENT_STATE(cmd->resp[0]) == R1_STATE_PRG); } > + > +static int mmc_ffu_wait_busy(struct mmc_card *card) { > + int ret, busy = 0; > + struct mmc_command cmd = {0}; > + > + memset(&cmd, 0, sizeof(struct mmc_command)); > + cmd.opcode = MMC_SEND_STATUS; > + cmd.arg = card->rca << 16; > + cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; > + > + do { > + ret = mmc_wait_for_cmd(card->host, &cmd, 0); > + if (ret) > + break; > + > + if (!busy && mmc_ffu_busy(&cmd)) { > + busy = 1; > + if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) { > + pr_warn("%s: Warning: Host did not " > + "wait for busy state to end.\n", > + mmc_hostname(card->host)); > + } > + } > + > + } while (mmc_ffu_busy(&cmd)); > + > + return ret; > +} > + > +/* > + * transfer with certain parameters > + */ > +static int mmc_ffu_simple_transfer(struct mmc_card *card, > + struct scatterlist *sg, unsigned int sg_len, u32 arg, > + unsigned int blocks, unsigned int blksz, int write) { > + struct mmc_request mrq = {0}; > + struct mmc_command cmd = {0}; > + struct mmc_command stop = {0}; > + struct mmc_data data = {0}; > + > + mrq.cmd = &cmd; > + mrq.data = &data; > + mrq.stop = &stop; > + mmc_ffu_prepare_mrq(card, &mrq, sg, sg_len, arg, blocks, blksz, > + write); > + mmc_wait_for_req(card->host, &mrq); > + > + mmc_ffu_wait_busy(card); > + > + return mmc_ffu_check_result(&mrq); > +} > + > +/* > + * Map memory into a scatterlist. > + */ > +static unsigned int mmc_ffu_map_sg(struct mmc_ffu_mem *mem, int size, > + struct scatterlist *sglist, unsigned int max_segs, > + unsigned int max_seg_sz) > +{ > + struct scatterlist *sg = sglist; > + unsigned int i; > + unsigned long sz = size; > + unsigned int sctr_len = 0; > + unsigned long len; > + > + sg_init_table(sglist, max_segs); > + > + for (i = 0; i < mem->cnt && sz; i++, sz -= len) { > + len = PAGE_SIZE * (1 << mem->arr[i].order); > + > + if (len > sz) { > + len = sz; > + sz = 0; > + } > + > + sg_set_page(sg, mem->arr[i].page, len, 0); > + sg = sg_next(sg); > + sctr_len += 1; > + } > + sg_mark_end(sg); > + > + return sctr_len; > +} > + > +static void mmc_ffu_free_mem(struct mmc_ffu_mem *mem) { > + if (!mem) > + return; > + > + while (mem->cnt--) > + __free_pages(mem->arr[mem->cnt].page, mem->arr[mem->cnt].order); > + > + kfree(mem->arr); > + kfree(mem); > +} > + > +/* > + * Cleanup struct mmc_ffu_area. > + */ > +static int mmc_ffu_area_cleanup(struct mmc_ffu_area *area) { > + kfree(area->sg); > + mmc_ffu_free_mem(area->mem); > + > + return 0; > +} > + > +/* > + * Allocate a lot of memory, preferably max_sz but at least min_sz. In > +case > + * there isn't much memory do not exceed 1/16th total low mem pages. > +Also do > + * not exceed a maximum number of segments and try not to make segments > +much > + * bigger than maximum segment size. > + */ > +static struct mmc_ffu_mem *mmc_ffu_alloc_mem(unsigned long min_sz, > + unsigned long max_sz, unsigned int max_segs, unsigned int max_seg_sz) > +{ > + unsigned long max_page_cnt = DIV_ROUND_UP(max_sz, PAGE_SIZE); > + unsigned long min_page_cnt = DIV_ROUND_UP(min_sz, PAGE_SIZE); > + unsigned long max_seg_page_cnt = DIV_ROUND_UP(max_seg_sz, PAGE_SIZE); > + unsigned long page_cnt = 0; > + /* we divide by 16 to ensure we will not allocate a big amount > + * of unnecessary pages */ > + unsigned long limit = nr_free_buffer_pages() >> 4; > + struct mmc_ffu_mem *mem; > + gfp_t flags = GFP_KERNEL | GFP_DMA | __GFP_NOWARN | __GFP_NORETRY; > + > + if (max_page_cnt > limit) > + max_page_cnt = limit; > + > + if (min_page_cnt > max_page_cnt) > + min_page_cnt = max_page_cnt; > + > + if (max_segs * max_seg_page_cnt > max_page_cnt) > + max_segs = DIV_ROUND_UP(max_page_cnt, max_seg_page_cnt); > + > + mem = kzalloc(sizeof(struct mmc_ffu_mem), GFP_KERNEL); > + if (!mem) > + return NULL; > + > + mem->arr = kzalloc(sizeof(struct mmc_ffu_pages) * max_segs, > + GFP_KERNEL); > + if (!mem->arr) > + goto out_free; > + > + while (max_page_cnt) { > + struct page *page; > + unsigned int order; > + > + order = get_order(max_seg_page_cnt << PAGE_SHIFT); > + > + do { > + page = alloc_pages(flags, order); > + } while (!page && order--); > + > + if (!page) > + goto out_free; > + > + mem->arr[mem->cnt].page = page; > + mem->arr[mem->cnt].order = order; > + mem->cnt += 1; > + if (max_page_cnt <= (1UL << order)) > + break; > + max_page_cnt -= 1UL << order; > + page_cnt += 1UL << order; > + } > + > + if (page_cnt < min_page_cnt) > + goto out_free; > + > + return mem; > + > +out_free: > + mmc_ffu_free_mem(mem); > + return NULL; > +} > + > +/* > + * Initialize an area for data transfers. > + * Copy the data to the allocated pages. > + */ > +static int mmc_ffu_area_init(struct mmc_ffu_area *area, struct mmc_card > *card, > + u8 *data, int size) > +{ > + int ret; > + int i; > + int length = 0; > + > + area->max_tfr = size; > + > + /* Try to allocate enough memory for a max. sized transfer. Less is OK > + * because the same memory can be mapped into the scatterlist more than > + * once. Also, take into account the limits imposed on scatterlist > + * segments by the host driver. > + */ > + area->mem = mmc_ffu_alloc_mem(1, area->max_tfr, area->max_segs, > + area->max_seg_sz); > + if (!area->mem) > + return -ENOMEM; > + > + /* copy data to page */ > + for (i = 0; i < area->mem->cnt; i++) { > + if (length > size) { > + ret = -EINVAL; > + goto out_free; > + } > + > + memcpy(page_address(area->mem->arr[i].page), data + length, > + min(size - length, (int)area->max_seg_sz)); > + length += area->max_seg_sz; > + } > + > + area->sg = kmalloc(sizeof(struct scatterlist) * area->mem->cnt, > + GFP_KERNEL); > + if (!area->sg) { > + ret = -ENOMEM; > + goto out_free; > + } > + > + area->sg_len = mmc_ffu_map_sg(area->mem, size, area->sg, > + area->max_segs, area->mem->cnt); > + > + return 0; > + > +out_free: > + mmc_ffu_area_cleanup(area); > + return ret; > +} > + > +static int mmc_ffu_write(struct mmc_card *card, u8 *src, u32 arg, > + int size) > +{ > + int rc; > + struct mmc_ffu_area area; > + int max_tfr; > + > + area.sg = NULL; > + area.mem = NULL; > + area.max_segs = card->host->max_segs; > + area.max_seg_sz = card->host->max_seg_size & ~(CARD_BLOCK_SIZE - 1); > + do { > + max_tfr = size; > + if (max_tfr >> 9 > card->host->max_blk_count) > + max_tfr = card->host->max_blk_count << 9; > + if (max_tfr > card->host->max_req_size) > + max_tfr = card->host->max_req_size; > + if (DIV_ROUND_UP(max_tfr, area.max_seg_sz) > area.max_segs) > + max_tfr = area.max_segs * area.max_seg_sz; > + > + rc = mmc_ffu_area_init(&area, card, src, max_tfr); > + if (rc != 0) > + goto exit; > + > + rc = mmc_ffu_simple_transfer(card, area.sg, area.sg_len, arg, > + max_tfr / CARD_BLOCK_SIZE, CARD_BLOCK_SIZE, 1); > + if (rc != 0) > + goto exit; > + > + src += max_tfr; > + size -= max_tfr; > + } while (size > 0); > + > +exit: > + mmc_ffu_area_cleanup(&area); > + return rc; > +} > + > +/* Flush all scheduled work from the MMC work queue. > + * and initialize the MMC device */ > +static int mmc_ffu_restart(struct mmc_card *card) { > + struct mmc_host *host = card->host; > + int err = 0; > + > + mmc_cache_ctrl(host, 0); > + err = mmc_power_save_host(host); > + if (err) { > + pr_warn("%s: going to sleep failed (%d)!!!\n", > + __func__ , err); > + goto exit; > + } > + > + err = mmc_power_restore_host(host); > + > +exit: > + > + return err; > +} > + > +int mmc_ffu_download(struct mmc_card *card, struct mmc_command *cmd, > + u8 *data, int buf_bytes) > +{ > + u8 ext_csd[CARD_BLOCK_SIZE]; > + int err; > + int ret; > + u8 *buf = NULL; > + const struct firmware *fw; > + > + /* Read the EXT_CSD */ > + err = mmc_send_ext_csd(card, ext_csd); > + if (err) { > + pr_err("FFU: %s: error %d sending ext_csd\n", > + mmc_hostname(card->host), err); > + goto exit; > + } > + > + /* check if card is eMMC 5.0 or higher */ > + if (card->ext_csd.rev < 7) > + return -EINVAL; > + > + /* Check if FFU is supported */ > + if (!FFU_SUPPORTED_MODE(ext_csd[EXT_CSD_SUPPORTED_MODE]) || > + FFU_CONFIG(ext_csd[EXT_CSD_FW_CONFIG])) { > + err = -EINVAL; > + pr_err("FFU: %s: error %d FFU is not supported\n", > + mmc_hostname(card->host), err); > + goto exit; > + } > + > + /* setup FW data buffer */ > + err = request_firmware(&fw, data, &card->dev); > + if (err) { > + pr_err("Firmware request failed %d\n", err); > + goto exit_normal; > + } > + > + buf = kmalloc(fw->size, GFP_KERNEL); > + if (buf == NULL) { > + pr_err("Allocating memory for firmware failed!\n"); > + goto exit_normal; > + } > + > + if ((fw->size % CARD_BLOCK_SIZE)) { > + pr_warn("FFU: %s: Warning %zd firmware data is not > aligned!!!\n", > + mmc_hostname(card->host), fw->size); > + } > + > + memcpy(buf, fw->data, fw->size); > + > + /* set device to FFU mode */ > + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_MODE_CONFIG, > + MMC_FFU_MODE_SET, card->ext_csd.generic_cmd6_time); > + if (err) { > + pr_err("FFU: %s: error %d FFU is not supported\n", > + mmc_hostname(card->host), err); > + goto exit_normal; > + } > + > + /* set CMD ARG */ > + cmd->arg = ext_csd[EXT_CSD_FFU_ARG] | > + ext_csd[EXT_CSD_FFU_ARG + 1] << 8 | > + ext_csd[EXT_CSD_FFU_ARG + 2] << 16 | > + ext_csd[EXT_CSD_FFU_ARG + 3] << 24; > + > + err = mmc_ffu_write(card, buf, cmd->arg, (int)fw->size); > + > +exit_normal: > + release_firmware(fw); > + kfree(buf); > + > + /* host switch back to work in normal MMC Read/Write commands */ > + ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, > + EXT_CSD_MODE_CONFIG, MMC_FFU_MODE_NORMAL, > + card->ext_csd.generic_cmd6_time); > + if (ret) > + err = ret; > +exit: > + return err; > +} > +EXPORT_SYMBOL(mmc_ffu_download); > + > +int mmc_ffu_install(struct mmc_card *card) { > + u8 ext_csd[CARD_BLOCK_SIZE]; > + int err; > + u32 ffu_data_len; > + u32 timeout; > + > + err = mmc_send_ext_csd(card, ext_csd); > + if (err) { > + pr_err("FFU: %s: error %d sending ext_csd\n", > + mmc_hostname(card->host), err); > + goto exit; > + } > + > + /* Check if FFU is supported */ > + if (!FFU_SUPPORTED_MODE(ext_csd[EXT_CSD_SUPPORTED_MODE]) || > + FFU_CONFIG(ext_csd[EXT_CSD_FW_CONFIG])) { > + err = -EINVAL; > + pr_err("FFU: %s: error %d FFU is not supported\n", > + mmc_hostname(card->host), err); > + goto exit; > + } > + > + /* check mode operation */ > + if (!FFU_FEATURES(ext_csd[EXT_CSD_FFU_FEATURES])) { > + /* restart the eMMC */ > + err = mmc_ffu_restart(card); > + if (err) { > + pr_err("FFU: %s: error %d FFU install:\n", > + mmc_hostname(card->host), err); > + } > + } else { > + > + ffu_data_len = ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG]| > + ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG + 1] << 8 | > + ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG + 2] << 16 | > + ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG + 3] << 24; > + > + if (!ffu_data_len) { > + err = -EPERM; > + return err; > + } > + /* set device to FFU mode */ > + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, > + EXT_CSD_MODE_CONFIG, 0x1, > + card->ext_csd.generic_cmd6_time); > + > + if (err) { > + pr_err("FFU: %s: error %d FFU is not supported\n", > + mmc_hostname(card->host), err); > + goto exit; > + } > + > + timeout = ext_csd[EXT_CSD_OPERATION_CODE_TIMEOUT]; > + if (timeout == 0 || timeout > 0x17) { > + timeout = 0x17; > + pr_warn("FFU: %s: operation code timeout is out " > + "of range. Using maximum timeout.\n", > + mmc_hostname(card->host)); > + } > + > + /* timeout is at millisecond resolution */ > + timeout = (100 * (1 << timeout) / 1000) + 1; > + > + /* set ext_csd to install mode */ > + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, > + EXT_CSD_MODE_OPERATION_CODES, > + MMC_FFU_INSTALL_SET, timeout); > + > + if (err) { > + pr_err("FFU: %s: error %d setting install mode\n", > + mmc_hostname(card->host), err); > + goto exit; > + } > + } > + > + /* read ext_csd */ > + err = mmc_send_ext_csd(card, ext_csd); > + if (err) { > + pr_err("FFU: %s: error %d sending ext_csd\n", > + mmc_hostname(card->host), err); > + goto exit; > + } > + > + /* return status */ > + err = ext_csd[EXT_CSD_FFU_STATUS]; > + if (err) { > + pr_err("FFU: %s: error %d FFU install:\n", > + mmc_hostname(card->host), err); > + err = -EINVAL; > + goto exit; > + } > + > +exit: > + return err; > +} > +EXPORT_SYMBOL(mmc_ffu_install); > + > diff --git a/include/linux/mmc/ffu.h b/include/linux/mmc/ffu.h new file mode > 100644 index 0000000..be70880 > --- /dev/null > +++ b/include/linux/mmc/ffu.h > @@ -0,0 +1,63 @@ > +/* > + * > + * ffu.h > + * > + * Copyright (c) 2013 SanDisk Corp. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > +(at > + * your option) any later version. > + * > + * This program was created by SanDisk Corp > + * The ffu.h file is obtained under the GPL v2.0 license that is > + * available via http://www.gnu.org/licenses/, > + * or http://www.opensource.org/licenses/gpl-2.0.php > +*/ > + > +#if !defined(_FFU_H_) > +#define _FFU_H_ > + > +#include <linux/mmc/card.h> > + > +#define CARD_BLOCK_SIZE 512 > + > +/* > + * eMMC5.0 Field Firmware Update (FFU) opcodes */ #define > +MMC_FFU_DOWNLOAD_OP 302 #define MMC_FFU_INSTALL_OP 303 > + > +#define MMC_FFU_MODE_SET 0x1 > +#define MMC_FFU_MODE_NORMAL 0x0 > +#define MMC_FFU_INSTALL_SET 0x1 > + > +#ifdef CONFIG_MMC_FFU > +#define MMC_FFU_ENABLE 0x0 > +#define MMC_FFU_CONFIG 0x1 > +#define MMC_FFU_SUPPORTED_MODES 0x1 > +#define MMC_FFU_FEATURES 0x1 > + > +#define FFU_ENABLED(ffu_enable) (ffu_enable & MMC_FFU_CONFIG) > +#define FFU_SUPPORTED_MODE(ffu_sup_mode) \ > + (ffu_sup_mode && MMC_FFU_SUPPORTED_MODES) #define > +FFU_CONFIG(ffu_config) (ffu_config & MMC_FFU_CONFIG) #define > +FFU_FEATURES(ffu_fetures) (ffu_fetures & MMC_FFU_FEATURES) > + > +int mmc_ffu_download(struct mmc_card *card, struct mmc_command *cmd, > + u8 *data, int buf_bytes); > +int mmc_ffu_install(struct mmc_card *card); #else static inline int > +mmc_ffu_download(struct mmc_card *card, > + struct mmc_command *cmd, u8 *data, int buf_bytes) { > + return -ENOSYS; > +} > +static inline int mmc_ffu_install(struct mmc_card *card) { > + return -ENOSYS; > +} > + > +#endif > +#endif /* FFU_H_ */ > + > diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index > 50bcde3..bf29e52 100644 > --- a/include/linux/mmc/mmc.h > +++ b/include/linux/mmc/mmc.h > @@ -272,6 +272,9 @@ struct _mmc_csd { > * EXT_CSD fields > */ > > +#define EXT_CSD_FFU_STATUS 26 /* R */ > +#define EXT_CSD_MODE_OPERATION_CODES 29 /* W */ > +#define EXT_CSD_MODE_CONFIG 30 /* R/W */ > #define EXT_CSD_FLUSH_CACHE 32 /* W */ > #define EXT_CSD_CACHE_CTRL 33 /* R/W */ > #define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ > @@ -290,6 +293,7 @@ struct _mmc_csd { > #define EXT_CSD_SANITIZE_START 165 /* W */ > #define EXT_CSD_WR_REL_PARAM 166 /* RO */ > #define EXT_CSD_RPMB_MULT 168 /* RO */ > +#define EXT_CSD_FW_CONFIG 169 /* R/W */ > #define EXT_CSD_BOOT_WP 173 /* R/W */ > #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ > #define EXT_CSD_PART_CONFIG 179 /* R/W */ > @@ -325,6 +329,11 @@ struct _mmc_csd { > #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ > #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ > #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ > +#define EXT_CSD_NUM_OF_FW_SEC_PROG 302 /* RO */ > +#define EXT_CSD_FFU_ARG 487 /* RO, 4 bytes */ > +#define EXT_CSD_OPERATION_CODE_TIMEOUT 491 /* RO */ > +#define EXT_CSD_FFU_FEATURES 492 /* RO */ > +#define EXT_CSD_SUPPORTED_MODE 493 /* RO */ > #define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */ > #define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ > #define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */ > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
