On Wed, Apr 16, 2014 at 02:40:10PM +0200, Antoine Ténart wrote:
> Add the SDHCI nodes for the Marvell Berlin BG2Q, using the berlin-sdhci
> driver.
>
> Signed-off-by: Antoine Ténart <antoine.ten...@free-electrons.com>
> ---
> arch/arm/boot/dts/berlin2q.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> index 5925e6a16749..8f897d461460 100644
> --- a/arch/arm/boot/dts/berlin2q.dtsi
> +++ b/arch/arm/boot/dts/berlin2q.dtsi
> @@ -67,6 +67,14 @@
> clock-div = <3>;
> };
>
> + sdio1clk: sdio1clk {
> + compatible = "fixed-factor-clock";
> + #clock-cells = <0>;
> + clocks = <&syspll>;
> + clock-mult = <1>;
> + clock-div = <4>;
> + };
> +
> soc {
> compatible = "simple-bus";
> #address-cells = <1>;
> @@ -75,6 +83,38 @@
> ranges = <0 0xf7000000 0x1000000>;
> interrupt-parent = <&gic>;
>
> + sdhci0: sdhci@ab0000 {
> + compatible = "marvell,berlin2q-sdhci";
> + reg = <0xab0000 0x200>;
> + clocks = <&sdio1clk>;
> + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> + keep-power-in-suspend;
> + enable-sdio-wakeup;
> + broken-cd;
Hi Antoine
I would expect these three last properties to be a property of the
board, not the SoC. Or am i missing something?
Thanks
Andrew
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
