Hi Andrew,
On Wed, Apr 16, 2014 at 03:09:15PM +0200, Andrew Lunn wrote:
> On Wed, Apr 16, 2014 at 02:40:10PM +0200, Antoine Ténart wrote:
> > Add the SDHCI nodes for the Marvell Berlin BG2Q, using the berlin-sdhci
> > driver.
> >
> > Signed-off-by: Antoine Ténart <antoine.ten...@free-electrons.com>
> > ---
> > arch/arm/boot/dts/berlin2q.dtsi | 40
> > ++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 40 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/berlin2q.dtsi
> > b/arch/arm/boot/dts/berlin2q.dtsi
> > index 5925e6a16749..8f897d461460 100644
> > --- a/arch/arm/boot/dts/berlin2q.dtsi
> > +++ b/arch/arm/boot/dts/berlin2q.dtsi
> > @@ -67,6 +67,14 @@
> > clock-div = <3>;
> > };
> >
> > + sdio1clk: sdio1clk {
> > + compatible = "fixed-factor-clock";
> > + #clock-cells = <0>;
> > + clocks = <&syspll>;
> > + clock-mult = <1>;
> > + clock-div = <4>;
> > + };
> > +
> > soc {
> > compatible = "simple-bus";
> > #address-cells = <1>;
> > @@ -75,6 +83,38 @@
> > ranges = <0 0xf7000000 0x1000000>;
> > interrupt-parent = <&gic>;
> >
> > + sdhci0: sdhci@ab0000 {
> > + compatible = "marvell,berlin2q-sdhci";
> > + reg = <0xab0000 0x200>;
> > + clocks = <&sdio1clk>;
> > + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> > + keep-power-in-suspend;
> > + enable-sdio-wakeup;
> > + broken-cd;
>
> Hi Antoine
>
> I would expect these three last properties to be a property of the
> board, not the SoC. Or am i missing something?
No reason, I'll move them.
Thanks !
Antoine
--
Antoine Ténart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
