From: Shinobu Uehara <shinobu.uehara...@renesas.com>
Renesas SDHI has "Multiple Block Transfer Mode" settings
on SD_CMD register which controls CMD12 automatically.
This patch cares it, because
CMD12 is not needed when CMD53 (= SD_IO_RW_EXTENDED)
[Kuninori Morimoto: tidyuped for upstreaming
enabled this flags for all SH-Mobile/R-Car]
Tested-by: Nguyen Xuan Nui <nx-...@jinso.co.jp>
Tested-by: Hiep Cao Minh <cm-h...@jinso.co.jp>
Signed-off-by: Shinobu Uehara <shinobu.uehara...@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto...@renesas.com>
---
drivers/mmc/host/sh_mobile_sdhi.c | 5 +++++
drivers/mmc/host/tmio_mmc_pio.c | 10 ++++++++++
include/linux/mfd/tmio.h | 6 ++++++
3 files changed, 21 insertions(+)
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c
b/drivers/mmc/host/sh_mobile_sdhi.c
index 91c6399..1d54b78 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -225,6 +225,11 @@ static int sh_mobile_sdhi_probe(struct platform_device
*pdev)
*/
mmc_data->flags |= TMIO_MMC_SDIO_IRQ;
+ /*
+ * All SDHI have CMD12 controll bit
+ */
+ mmc_data->flags |= TMIO_MMC_HAVE_CMD12_CTRL;
+
if (of_id && of_id->data) {
const struct sh_mobile_sdhi_of_data *of_data = of_id->data;
mmc_data->flags |= of_data->tmio_flags;
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index c3b1b4e..1f1fdfb 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -44,6 +44,7 @@
#include <linux/pm_qos.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
+#include <linux/mmc/sdio.h>
#include <linux/scatterlist.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
@@ -295,6 +296,7 @@ static void tmio_mmc_done_work(struct work_struct *work)
#define TRANSFER_READ 0x1000
#define TRANSFER_MULTI 0x2000
#define SECURITY_CMD 0x4000
+#define NO_CMD12_ISSUE 0x4000 /* TMIO_MMC_HAVE_CMD12_CTRL */
static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct
mmc_command *cmd)
{
@@ -331,6 +333,14 @@ static int tmio_mmc_start_command(struct tmio_mmc_host
*host, struct mmc_command
if (data->blocks > 1) {
sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
c |= TRANSFER_MULTI;
+
+ /*
+ * Disable auto CMD12 at IO_RW_EXTENDED when
+ * multiple block transfer
+ */
+ if ((host->pdata->flags & TMIO_MMC_HAVE_CMD12_CTRL) &&
+ (cmd->opcode == SD_IO_RW_EXTENDED))
+ c |= NO_CMD12_ISSUE;
}
if (data->flags & MMC_DATA_READ)
c |= TRANSFER_READ;
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 777e29b..7432d95 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -83,6 +83,12 @@
*/
#define TMIO_MMC_HAVE_HIGH_REG (1 << 6)
+/*
+ * Some controllers have CMD12 automatically
+ * issue/non-issue register
+ */
+#define TMIO_MMC_HAVE_CMD12_CTRL (1 << 7)
+
int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
