d726ca2d3316 (ARM: dts: Add vmmc-supply to MMC on arndale-octa board)
added the vmmc-supply to nodes mmc@12200000 and mmc@12220000 of the
DT. However, this makes the kernel fail to boot on the arndale-octa
spews:
[ 5.060000] dwmmc_exynos 12200000.mmc: num-slots property not found,
assuming 1 slot is available
[ 5.065000] platform 12200000.mmc: Driver dwmmc_exynos requests probe
deferral
[ 5.075000] dwmmc_exynos 12220000.mmc: num-slots property not found,
assuming 1 slot is available
[ 5.085000] platform 12220000.mmc: Driver dwmmc_exynos requests probe
deferral
And eventually hangs. Without the vmmc-supply property in the
mmc@12220000 node, the kernel boots again.
Signed-off-by: Javi Merino <javi.mer...@arm.com>
---
Hi,
Note that I don't know *why* removing the property works, all I know
is that 3.15-rc2 fails to boot on my Arndale Octa unless I apply this
patch.
Cheers,
Javi
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 80a3bf4..722fb6c 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -64,7 +64,6 @@
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- vmmc-supply = <&ldo10_reg>;
slot@0 {
reg = <0>;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
