This is a porting from yocto-3.14 branch. Signed-off-by: Daniel Dragomir <daniel.drago...@windriver.com> --- bsp/axxiapowerpc/axxiapowerpc-preempt-rt.scc | 8 ++ bsp/axxiapowerpc/axxiapowerpc-standard.scc | 8 ++ bsp/axxiapowerpc/axxiapowerpc.cfg | 159 +++++++++++++++++++++++++++ bsp/axxiapowerpc/axxiapowerpc.scc | 5 + bsp/axxiapowerpc/rapidio.cfg | 25 +++++ bsp/axxiapowerpc/rapidio.scc | 4 + 6 files changed, 209 insertions(+) create mode 100644 bsp/axxiapowerpc/axxiapowerpc-preempt-rt.scc create mode 100644 bsp/axxiapowerpc/axxiapowerpc-standard.scc create mode 100644 bsp/axxiapowerpc/axxiapowerpc.cfg create mode 100644 bsp/axxiapowerpc/axxiapowerpc.scc create mode 100644 bsp/axxiapowerpc/rapidio.cfg create mode 100644 bsp/axxiapowerpc/rapidio.scc
diff --git a/bsp/axxiapowerpc/axxiapowerpc-preempt-rt.scc b/bsp/axxiapowerpc/axxiapowerpc-preempt-rt.scc new file mode 100644 index 0000000..a87b342 --- /dev/null +++ b/bsp/axxiapowerpc/axxiapowerpc-preempt-rt.scc @@ -0,0 +1,8 @@ +define KMACHINE axxiapowerpc +define KTYPE preempt-rt +define KARCH powerpc + +include ktypes/preempt-rt +branch axxia + +include axxiapowerpc.scc diff --git a/bsp/axxiapowerpc/axxiapowerpc-standard.scc b/bsp/axxiapowerpc/axxiapowerpc-standard.scc new file mode 100644 index 0000000..1caa2dd --- /dev/null +++ b/bsp/axxiapowerpc/axxiapowerpc-standard.scc @@ -0,0 +1,8 @@ +define KMACHINE axxiapowerpc +define KTYPE standard +define KARCH powerpc + +include ktypes/standard +branch axxia + +include axxiapowerpc.scc diff --git a/bsp/axxiapowerpc/axxiapowerpc.cfg b/bsp/axxiapowerpc/axxiapowerpc.cfg new file mode 100644 index 0000000..b93c9d8 --- /dev/null +++ b/bsp/axxiapowerpc/axxiapowerpc.cfg @@ -0,0 +1,159 @@ +#......................................................................... +# WARNING +# +# This file is a kernel configuration fragment, and not a full kernel +# configuration file. The final kernel configuration is made up of +# an assembly of processed fragments, each of which is designed to +# capture a specific part of the final configuration (e.g. platform +# configuration, feature configuration, and board specific hardware +# configuration). For more information on kernel configuration, please +# consult the product documentation. +# +#......................................................................... +# +# Processor support +# +CONFIG_44x=y +CONFIG_PPC_47x=y +CONFIG_NR_CPUS=6 + +# +# Platform support +# +CONFIG_ELPASO=y + +# +# Kernel options +# +CONFIG_HIGHMEM=y +CONFIG_HZ_100=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0 mtdparts=acp-nand:512K(2ndStage),512K(env-0),512K(env-1),512K(3rdStage),-(fs) ip=dhcp root=/dev/nfs" + +# +# Advanced setup +# +CONFIG_ADVANCED_OPTIONS=y +CONFIG_LOWMEM_SIZE_BOOL=y +CONFIG_LOWMEM_SIZE=0x40000000 +# CONFIG_DYNAMIC_MEMSTART is not set +CONFIG_PAGE_OFFSET_BOOL=y +CONFIG_PAGE_OFFSET=0xa0000000 +CONFIG_KERNEL_START_BOOL=y +CONFIG_KERNEL_START=0xa0400000 +CONFIG_PHYSICAL_START_BOOL=y +CONFIG_PHYSICAL_START=0x400000 +CONFIG_TASK_SIZE_BOOL=y +CONFIG_TASK_SIZE=0xa0000000 + +# Bus options +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_MSI=y + +# Device Drivers +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_FW_LOADER=y + +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP_OF=y + +CONFIG_PROC_DEVICETREE=y + +CONFIG_SCSI_CONSTANTS=y + +CONFIG_USB_ZD1201=y +# CONFIG_INPUT_EVDEV is not set +CONFIG_SERIAL_ACP=y +CONFIG_SERIAL_ACP_CONSOLE=y + +CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_EP501X=y + +CONFIG_LSI_NET=y + +CONFIG_USB_CI13612_HCD=y + +CONFIG_LSI_USB_SW_WORKAROUND=y + +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y + +CONFIG_MICREL_PHY=y + +# +# Non-8250 serial port support +# +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_AXXIA=y + +CONFIG_I2C=y +CONFIG_ACP3400_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_AXXIA=y +CONFIG_I2C_DEBUG_CORE=y +CONFIG_I2C_DEBUG_ALGO=y +CONFIG_I2C_DEBUG_BUS=y + +CONFIG_GPIOLIB=y + +# CONFIG_HWMON is not set + +CONFIG_VLAN_8021Q=y + +# +# Distributed Switch Architecture drivers +# +CONFIG_E1000=y +CONFIG_E1000E=y +CONFIG_IGB=y +CONFIG_IGBVF=y + +# +# USB support +# +CONFIG_USB_DEBUG=y +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_MON=y +CONFIG_USB_STORAGE=y + +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y +CONFIG_XPS_USB_HCD_XILINX=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set + +CONFIG_DMADEVICES=y +CONFIG_LSI_DMA=y + +CONFIG_LSI_NCR=y + +# CONFIG_SUSPEND is not set + +# +# Device Tree and Open Firmware support +# +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +CONFIG_BLK_DEV_RAM_SIZE=35000 + +# +# RCU Debugging +# +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +CONFIG_PPC_EARLY_DEBUG=y +CONFIG_PPC_EARLY_DEBUG_44x=y +CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x00400000 +CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x20 diff --git a/bsp/axxiapowerpc/axxiapowerpc.scc b/bsp/axxiapowerpc/axxiapowerpc.scc new file mode 100644 index 0000000..37b0c39 --- /dev/null +++ b/bsp/axxiapowerpc/axxiapowerpc.scc @@ -0,0 +1,5 @@ +include features/usb/ehci-hcd.scc +include features/scsi/disk.scc +include rapidio.scc + +kconf hardware axxiapowerpc.cfg diff --git a/bsp/axxiapowerpc/rapidio.cfg b/bsp/axxiapowerpc/rapidio.cfg new file mode 100644 index 0000000..bbbd785 --- /dev/null +++ b/bsp/axxiapowerpc/rapidio.cfg @@ -0,0 +1,25 @@ +#......................................................................... +# WARNING +# +# This file is a kernel configuration fragment, and not a full kernel +# configuration file. The final kernel configuration is made up of +# an assembly of processed fragments, each of which is designed to +# capture a specific part of the final configuration (e.g. platform +# configuration, feature configuration, and board specific hardware +# configuration). For more information on kernel configuration, please +# consult the product documentation. +# +#......................................................................... + +CONFIG_RAPIDIO=y +# CONFIG_AXXIA_RIO is not set +CONFIG_RIO_MAINT_WIN_SIZE=0x400000 +CONFIG_RAPIDIO_DISC_TIMEOUT=10 +CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y +CONFIG_RAPIDIO_DEBUG=y +CONFIG_RAPIDIO_CPS_XX=y +CONFIG_RAPIDIO_CPS_GEN2=y + +CONFIG_RIONET=y +CONFIG_RIONET_TX_SIZE=128 +CONFIG_RIONET_RX_SIZE=128 diff --git a/bsp/axxiapowerpc/rapidio.scc b/bsp/axxiapowerpc/rapidio.scc new file mode 100644 index 0000000..36cb6e6 --- /dev/null +++ b/bsp/axxiapowerpc/rapidio.scc @@ -0,0 +1,4 @@ +define KFEATURE_DESCRIPTION "Enable support for the sRIO controller" +define KFEATURE_COMPATIBILITY all + +kconf hardware rapidio.cfg -- 2.7.4 -- _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto
