LinuxBIOS-2.0.0.0Fallback Mon Nov  6 00:58:20 UTC 2006 starting...
Setting up default parameters for memory
Sizing memory
Probing for DIMM0
    Found DIMM0
    Page Size:       00002000
    Component Banks: 4
    Module Banks:    1
    DIMM size:       08000000
Probing for DIMM1
MC_BANK_CFG = 00701530
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0.0Fallback Mon Nov  6 00:58:20 UTC 2006 booting...
clocks_per_usec: 410
Enumerating buses...
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [1078/0001] enabled
PCI: 00:0a.0 [10ec/8139] enabled
PCI: 00:0b.0 [10ec/8139] enabled
PCI: 00:0c.0 [10ec/8139] enabled
Disabling static device: PCI: 00:0f.0
PCI: 00:12.0 [1078/0100] enabled
PCI: 00:12.1 [1078/0101] enabled
PCI: 00:12.2 [1078/0102] enabled
PCI: 00:12.3 [1078/0103] enabled
PCI: 00:12.4 [1078/0104] enabled
PCI: 00:13.0 [0e11/a0f8] enabled
PNP: 002e.0 disabled
PNP: 002e.1 enabled
PNP: 002e.2 enabled
PNP: 002e.3 enabled
PNP: 002e.5 enabled
PNP: 002e.6 disabled
PNP: 002e.7 enabled
PNP: 002e.8 enabled
PNP: 002e.9 enabled
PNP: 002e.a enabled
PCI: 00:12.1 enabled
PCI: 00:12.2 enabled
PCI: 00:12.3 enabled
PCI: pci_scan_bus returning with max=000
done
Allocating resources...
Reading resources...
Done reading resources.
Allocating VGA resource PCI: 00:12.4
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
BC_DRAM_TOP = 0x07bfffff
MC_GBASE_ADD = 0x000000f8
I would set ram size to 124 Mbytes
PCI: 00:0a.0 10 <- [0x0000001000 - 0x00000010ff] io
PCI: 00:0a.0 14 <- [0x00febfb000 - 0x00febfb0ff] mem
PCI: 00:0b.0 10 <- [0x0000001400 - 0x00000014ff] io
PCI: 00:0b.0 14 <- [0x00febfc000 - 0x00febfc0ff] mem
PCI: 00:0c.0 10 <- [0x0000001800 - 0x00000018ff] io
PCI: 00:0c.0 14 <- [0x00febfd000 - 0x00febfd0ff] mem
PCI: 00:12.1 10 <- [0x00febfe000 - 0x00febfe0ff] mem
PCI: 00:12.2 20 <- [0x0000001c00 - 0x0000001c7f] io
PCI: 00:12.3 10 <- [0x00febff000 - 0x00febff07f] mem
PCI: 00:12.4 10 <- [0x00febf9000 - 0x00febf9fff] mem
PCI: 00:13.0 10 <- [0x00febfa000 - 0x00febfafff] mem
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:00.0 cmd <- 147
PCI: 00:0a.0 subsystem <- 00/00
PCI: 00:0a.0 cmd <- 143
PCI: 00:0b.0 subsystem <- 00/00
PCI: 00:0b.0 cmd <- 143
PCI: 00:0c.0 subsystem <- 00/00
PCI: 00:0c.0 cmd <- 143
PCI: 00:12.0 cmd <- 14f
PNP: 002e.8 missing enable_resources
PNP: 002e.9 missing enable_resources
PCI: 00:12.1 missing enable_resources
PCI: 00:12.2 missing enable_resources
PCI: 00:12.3 missing enable_resources
PCI: 00:12.1 cmd <- 142
PCI: 00:12.2 cmd <- 141
PCI: 00:12.3 cmd <- 142
PCI: 00:12.4 cmd <- 143
PCI: 00:13.0 subsystem <- 00/00
PCI: 00:13.0 cmd <- 142
done.
Initializing devices...
Root Device init
PCI: 00:00.0 init
northbridge: northbridge_init()
PCI: 00:12.0 init
PNP: 002e.1 init
PNP: 002e.2 init
PNP: 002e.3 init
PNP: 002e.5 init
PNP: 002e.7 init
PNP: 002e.a init
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
PCI: 00:13.0 init
PCI: 00:12.1 init
PCI: 00:12.2 init
PCI: 00:12.3 init
PCI: 00:12.4 init
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...done
Checking IRQ routing table consistency...
Inconsistent IRQ routing table size (0x90/0x70)
check_pirq_routing_table() - irq_routing_table located at: 0x000f0000
done.
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 00000b50  checksum fe90

Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3

rom_stream: 0xfffc8000 - 0xfffeffff
Uncompressing to RAM 0x01000000  olen = 0x000068c8 done.
Found ELF candidate at offset 0
New segment addr 0x100000 size 0x20560 offset 0xc0 filesize 0x65c8
(cleaned up) New segment addr 0x100000 size 0x20560 offset 0xc0 filesize 0x65c8
New segment addr 0x120560 size 0x48 offset 0x66a0 filesize 0x48
(cleaned up) New segment addr 0x120560 size 0x48 offset 0x66a0 filesize 0x48
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000020560 filesz: 0x00000000000065c8
Clearing Segment: addr: 0x00000000001065c8 memsz: 0x0000000000019f98
Loading Segment: addr: 0x0000000000120560 memsz: 0x0000000000000048 filesz: 0x0000000000000048
Jumping to boot code at 0x1049dc
FILO version 0.5 (lfcorreia@devel) Wed Nov  1 23:58:04 UTC 2006
Press <Enter> for default boot, or <Esc> for boot prompt... timed out
boot: hda1:/vmlinuz root=/dev/hda2 append initrd=/initrd-2.4.20-8.img console=ttyS0,115200
hda: LBA 8455MB: QUANTUM FIREBALLlct08 08
hdb: ATAPI: ASUS    DVD-E616A2
Mounted ext2fs
Found Linux version 2.4.20-8 (bhcompile@stripples.devel.redhat.com) #1 Thu Mar 13 16:42:56 EST 2003 bzImage.
Loading kernel... ok
Loading initrd... ok
Jumping to entry point...
Linux version 2.4.20-8 (bhcompile@stripples.devel.redhat.com) (gcc version 3.2.2 20030222 
(Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 16:42:56 EST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000bb8 - 00000000000a0000 (usable)
 BIOS-e820: 0000000000100000 - 0000000007c00000 (usable)
124MB LOWMEM available.
hm, page 00000000 reserved twice.
On node 0 totalpages: 31744
zone(0): 4096 pages.
zone(1): 27648 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda2 append console=ttyS0,115200
Initializing CPU#0
Working around Cyrix MediaGX virtual DMA bugs.
Detected 300.682 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 599.65 BogoMIPS
Memory: 120968k/126976k available (1221k kernel code, 4628k reserved, 993k data, 116k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Working around Cyrix MediaGX virtual DMA bugs.
CPU: NSC Geode(TM) Integrated Processor by National Semi stepping 02
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
PCI: PCI BIOS revision 2.10 entry at 0xfaeb0, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered primary peer bus 01 [IRQ]
PCI: Using IRQ router NatSemi [1078/0100] at 00:12.0
PCI: Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x10)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Detected PS/2 Mouse Port.
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CS5530: IDE controller at PCI slot 00:12.2
CS5530: chipset revision 0
CS5530: not 100% native mode: will probe irqs later
PCI: 00:12.0 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:12.0 PCI cache line size corrected to 32.
    ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:pio, hdd:pio
hda: C/H/S=0/0/0 from BIOS ignored
hda: QUANTUM FIREBALLlct08 08, ATA DISK drive
hdb: ASUS DVD-E616A2, ATAPI CD/DVD-ROM drive
blk: queue c03944a0, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: host protected area => 1
hda: 16514064 sectors (8455 MB) w/418KiB Cache, CHS=16383/16/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
 hda: [PTBL] [1027/255/63] hda1 hda2 hda3
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
Updating /etc/fstab [  OK  ]
Setting network parameters:  [  OK  ]
Bringing up loopback interface:  [  OK  ]
Starting system logger: [  OK  ]
Starting kernel logger: [  OK  ]
Starting portmapper: [  OK  ]
Starting NFS statd: [  OK  ]
Starting keytable:  [  OK  ]
Initializing random number generator:  [  OK  ]
Mounting other filesystems:  [  OK  ]
Starting automount: No Mountpoints Defined[  OK  ]
Starting sshd:[  OK  ]
Starting sendmail: [  OK  ]
Starting sm-client: [  OK  ]
Starting console mouse services: [  OK  ]
Starting crond: [  OK  ]
Starting xfs: [  OK  ]
Starting atd: [  OK  ]

Red Hat Linux release 9 (Shrike)
Kernel 2.4.20-8 on an i586

localhost.localdomain login:


