Hi, Les:
We just want to distinguish the passive interfaces from other normal interfaces within ISIS domain. It seems that the “Attribute Flags” that described in https://tools.ietf.org/html/rfc7794#section-2.1 is the most appropriate place to extend to carry such information. If so, we can write one draft to define one more attribute flag to accomplish this. Or, is there any other way to fulfill this task? Originally, I want to reuse the reserve bits before “Circuit Type” field. It seems not the right direction. And on the other hand, occupying all the reserved bits for the unnecessary expansion is also not the right direction? Best Regards. Aijun Wang China Telecom 发件人: lsr-boun...@ietf.org [mailto:lsr-boun...@ietf.org] 代表 Les Ginsberg (ginsberg) 发送时间: 2020年1月6日 12:52 收件人: Aijun Wang; lsr@ietf.org 主题: Re: [Lsr] Is it necessary to expand the IS-IS level to 8? Aijun �C Regarding the number of levels, Tony responded to a similar comment several months ago �C please see https://mailarchive.ietf.org/arch/msg/lsr/dKJBcU59TNuY3rxgjd6iXIq6sYg <snip> > It seems not necessary to have 8 levels of hierarchies. 3 or at most 4 levels of hierarchies should be enough. IS-IS with 3 levels of hierarchies may support a network with 1k*1k*1k nodes, which is about 10^9 = 1 billion nodes. IS-IS with 4 levels of hierarchies may support a network with 1k*1k*1k*1k nodes, which is about 10^12 = 1 trillion nodes. This is correct. It’s not absolutely necessary. However, as Robert mentioned, it does give the network designer flexibility to create the hierarchy that matches the needs of his network. The cost of the additional levels is very small, given that we’re considering adding any levels at all, so it seemed sensible to define all of the levels at once. “From an architectural point of view, if a number isn’t obviously too large, then it’s probably too small.” ― Ross Callon <end snip> Link type in OSPF is not at all the same thing as level in IS-IS �C so I do not find that analogy appropriate: >From https://tools.ietf.org/html/rfc2328 page 128 <snip> Link type Description Link ID __________________________________________________ 1 Point-to-point Neighbor Router ID link 2 Link to transit Interface address of network Designated Router 3 Link to stub IP network number network 4 Virtual link Neighbor Router ID Table 18: Link descriptions in the router-LSA. <end snip> Les From: Lsr <lsr-boun...@ietf.org> On Behalf Of Aijun Wang Sent: Sunday, January 05, 2020 8:03 PM To: lsr@ietf.org Subject: [Lsr] Is it necessary to expand the IS-IS level to 8? Hi, Tony, Les and Paul: As I read the draft https://tools.ietf.org/html/draft-ietf-lsr-isis-extended-hierarchy-00, and notice the proposal to expand the reserved bits in “Circuit Type” to cover the level 1-8 in ISIS domain. Here I just want to know is it necessary to expand the IS-IS level to 8 and occupy all the reserved bits in the PDU format? As compared with the OSPF format, there is one field to describe the “Link Type” (5 bits, currently define only four types). We want to use the reserved bits in current “Circuit Type” of ISIS PDU format to fulfill the similar tasks. Can this draft leave at least 2 reserved bits for this purpose? There are many ways to tackle the scale of networks, who will design their network in level 8 hierarchy? As I estimated, Level 4 may be the acceptable highest network hierarchy. Best Regards. Aijun Wang China Telecom
_______________________________________________ Lsr mailing list Lsr@ietf.org https://www.ietf.org/mailman/listinfo/lsr