Hi Giorgio,
After reading the man page for dhcp-options, you can create as many
option codes as you want. To add another option for the lpp patch try
option option-130 "vga=0x301 console=/dev/tty2";
I am not an expert on dhcp, so if this is incorrect please let us know.
I also found that this option was not necessary to display the lpp
screen on my clients. As long as I listed the lpp kernel in the
dhcpd.conf file it loaded without the option line.
filename "/lts/vmlinuz-2.4.9-ltsp-lpp-1";
Good luck,
Erick
On Tue, 2001-11-27 at 07:59, giorgio rossi wrote:
> Hi Eric,
>
> I have already the option option-129 busy from the NIC,
>
> option option-129 "NIC=ne I0=0x320";
>
> have a suggest ?
>
> tanks
> giorgio
>
> Il mar, 30 ott 2001, scrivesti:
> > James,
> >
> > You also need the following lines for each workstation in your dhcpd.conf
> > file in order for the lpp screen to display:
> >
> > option option-128 e4:45:74:68:00:00;
> > option option-129 "vga=0x301 console=/dev/tty2";
> >
> > Hope this helps,
> >
> > Erick
> -----------snip-------
> --
> Giorgio Rossi
> Tech. - Dept.
> Brazzoli S.p.A.
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
