Erick, Actually, Etherboot has different uses for each of the options.
option-129 is clearly for kernel command line options. Take a look at http://etherboot.sourceforge.net/doc/html/vendortags.html for a list of the tags that Etherboot uses. Jim McQuillan [EMAIL PROTECTED] Erick S. Tyack wrote: >Hi Giorgio, > >After reading the man page for dhcp-options, you can create as many >option codes as you want. To add another option for the lpp patch try > >option option-130 "vga=0x301 console=/dev/tty2"; > >I am not an expert on dhcp, so if this is incorrect please let us know. > >I also found that this option was not necessary to display the lpp >screen on my clients. As long as I listed the lpp kernel in the >dhcpd.conf file it loaded without the option line. > >filename "/lts/vmlinuz-2.4.9-ltsp-lpp-1"; > >Good luck, > >Erick > > >On Tue, 2001-11-27 at 07:59, giorgio rossi wrote: > >>Hi Eric, >> >>I have already the option option-129 busy from the NIC, >> >>option option-129 "NIC=ne I0=0x320"; >> >>have a suggest ? >> >>tanks >>giorgio >> >>Il mar, 30 ott 2001, scrivesti: >> >>>James, >>> >>>You also need the following lines for each workstation in your dhcpd.conf >>>file in order for the lpp screen to display: >>> >>> option option-128 e4:45:74:68:00:00; >>> option option-129 "vga=0x301 console=/dev/tty2"; >>> >>>Hope this helps, >>> >>>Erick >>> >>-----------snip------- >>-- >>Giorgio Rossi >>Tech. - Dept. >>Brazzoli S.p.A. >> > > > >_____________________________________________________________________ >Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
