On 14/09/2007, Asmo Koskinen <[EMAIL PROTECTED]> wrote: > "5. Unplug the LTSP network cable from one server at a time and make > sure the workstations can boot from the remaining box." > > Should this work that way?
Yes. That is what fail-safe-load-balancing is supposed to be. > 1. When I shutdown dhcp3-server on Master-server, I can force thin > client to start on Slave-server. > > 2. When I shutdown dhcp3-server on Master-server and unplug > Master-servers network cable, thin client get error message: tftp - arp > timeout. But they do get ip-number from Slave-server. It seems that the second server is not setup properly. What is the dhcpd.conf of second server? Is it pointing to the second server or (if you have just copied it from first) pointing to the first server itself. > I'm little bit confused - that's nothing new, anyway. ;-) -- Regards, Sudev Barar See you at 'Freed.in - freedom in technology & software' - India's leading free and open source community event. 28- 29 September 2007, New Delhi. Entry free, on first come basis. Register at http://Freed.in ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
