/* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels * */ #ifndef __LWIPOPTS_H__ #define __LWIPOPTS_H__ #define LWIP_PROVIDE_ERRNO #define DBG_MIN_LEVEL 0 /* Note: Task priorities, LWIP_START_PRIO through (LWIP_START_PRIO+LWIP_MAX_TASKS-1) must be reserved for LwIP and must not used by other applications outside. */ //#define SLIPIF_THREAD_PRIO 1 // the priority from 5-14 is used by tasks in lwip stack //---------------- common thread define --------------------- // the first thread #define LWIP_FIRST_THREAD_PRIO 5 //by wrq // for uC/OS-II port on TI DSP #define TCPIP_THREAD_PRIO 5 // must be selected // for TIMER of slidding widows fresh task #define TIMER_THREAD_PRIO 6 // must be selected //-----------------------hole up_router--------------------- // for pppMain task #define PPP_THREAD_PRIO 7 // must be selected #define MODEM_THREAD_PRIO 8 // for hole up_router //---------------------hole down_router---------------------- //#define PPP_THREAD_PRIO 7 // must be selected #define SNTP_SRV_THREAD_PRIO 8 // for hole down_router //--------------------NCU------------------------------------ #define DEMON_SRV_THREAD_PRIO 7 // for hole down_router #define SNTP_CLNT_THREAD_PRIO 8 // for hole down_router // for application #define LWIP_MAIN_PRIO 9 // lwip main task #define APP_THREAD_PRIO 10 // only one is selected // open or close all debug switch #define LWIP_DEBUG // #ifdef LWIP_DEBUG #define TAPIF_DEBUG LWIP_DBG_OFF #define TUNIF_DEBUG LWIP_DBG_OFF #define UNIXIF_DEBUG LWIP_DBG_OFF #define DELIF_DEBUG LWIP_DBG_OFF #define SIO_FIFO_DEBUG LWIP_DBG_OFF #define TCPDUMP_DEBUG LWIP_DBG_OFF #define MEM_DEBUG LWIP_DBG_OFF #define MEMP_DEBUG LWIP_DBG_OFF #define PBUF_DEBUG LWIP_DBG_OFF #define API_LIB_DEBUG LWIP_DBG_OFF #define API_MSG_DEBUG LWIP_DBG_OFF #define TCPIP_DEBUG LWIP_DBG_ON #define NETIF_DEBUG LWIP_DBG_OFF #define SOCKETS_DEBUG LWIP_DBG_OFF #define DEMO_DEBUG LWIP_DBG_OFF #define PPP_DEBUG LWIP_DBG_OFF #define IP_DEBUG LWIP_DBG_OFF #define IP_REASS_DEBUG LWIP_DBG_OFF #define ICMP_DEBUG LWIP_DBG_OFF #define UDP_DEBUG LWIP_DBG_OFF #define TCP_DEBUG LWIP_DBG_ON #define TCP_INPUT_DEBUG LWIP_DBG_ON #define TCP_OUTPUT_DEBUG LWIP_DBG_ON #define SYS_DEBUG LWIP_DBG_OFF #define TCP_RTO_DEBUG LWIP_DBG_ON #define TCP_CWND_DEBUG LWIP_DBG_ON #define TCP_WND_DEBUG LWIP_DBG_ON #define TCP_FR_DEBUG LWIP_DBG_ON #define TCP_QLEN_DEBUG LWIP_DBG_ON #define TCP_RST_DEBUG LWIP_DBG_ON #define SESSION_DEBUG LWIP_DBG_OFF #define APP_DEBUG LWIP_DBG_OFF #define SIO_DEBUG LWIP_DBG_OFF #define CPCI_DEBUG LWIP_DBG_OFF #endif #define DBG_TYPES_ON (DBG_ON|DBG_TRACE|DBG_STATE|DBG_FRESH|DBG_HALT) //#define NO_SYS 1 // 没有操作系统支持的 #define NO_SYS 0 // 有操作系统支持的 /* ---------- Memory options ---------- */ /* MEM_ALIGNMENT: should be set to the alignment of the CPU for which lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2 byte alignment -> define MEM_ALIGNMENT to 2. */ #define MEM_ALIGNMENT 4 /* MEM_SIZE: the size of the heap memory. If the application will send a lot of data that needs to be copied, this should be set high. */ #define MEM_SIZE 0x10000//10240 /* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application sends a lot of data out of ROM (or other static memory), this should be set high. */ #define MEMP_NUM_PBUF 128 /* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One per active UDP "connection". */ #define MEMP_NUM_UDP_PCB 4 /* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. */ #define MEMP_NUM_TCP_PCB 5 /* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. */ #define MEMP_NUM_TCP_PCB_LISTEN 8 /* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. */ #define MEMP_NUM_TCP_SEG 256 /* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. */ #define MEMP_NUM_SYS_TIMEOUT 8 /* The following four are used only with the sequential API and can be set to 0 if the application only will use the raw API. */ /* MEMP_NUM_NETBUF: the number of struct netbufs. */ #define MEMP_NUM_NETBUF 16 /*original code */ /* MEMP_NUM_NETCONN: the number of struct netconns. */ #define MEMP_NUM_NETCONN 16 /* MEMP_NUM_APIMSG: the number of struct api_msg, used for communication between the TCP/IP stack and the sequential programs. */ //#define MEMP_NUM_API_MSG 32//16 /* MEMP_NUM_TCPIPMSG: the number of struct tcpip_msg, which is used for sequential API communication and incoming packets. Used in src/api/tcpip.c. */ //#define MEMP_NUM_TCPIP_MSG 32//16 /* ---------- Pbuf options ---------- */ /* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ #define PBUF_POOL_SIZE 128 /* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */ /*!!!!!##### WARNING: the PBUF_POOL_BUFSIZE must not changed!!!!######*/ #define PBUF_POOL_BUFSIZE 108 /* PBUF_LINK_HLEN: the number of bytes that should be allocated for a link level header. */ #define PBUF_LINK_HLEN 16 /** SYS_LIGHTWEIGHT_PROT * define SYS_LIGHTWEIGHT_PROT in lwipopts.h if you want inter-task protection * for certain critical regions during buffer allocation, deallocation and memory * allocation and deallocation. */ #define SYS_LIGHTWEIGHT_PROT 1 /* ---------- TCP options ---------- */ #define LWIP_TCP 1 #define TCP_TTL 255 /* Controls if TCP should queue segments that arrive out of order. Define to 0 if your device is low on memory. */ #define TCP_QUEUE_OOSEQ 1 /* TCP Maximum segment size. */ #define TCP_MSS 1024// 2048 must be less than PPP_MTU /* TCP sender buffer space (bytes). */ #define TCP_SND_BUF 0xF000//4096 /* TCP sender buffer space (pbufs). This must be at least = 2 * TCP_SND_BUF/TCP_MSS for things to work. */ //#define TCP_SND_QUEUELEN TCP_SND_BUF/TCP_MSS //4 #define TCP_SND_QUEUELEN (4 * (TCP_SND_BUF/TCP_MSS)) //4* TCP_SND_BUF/TCP_MSS /* TCP writable space (bytes). This must be less than or equal to TCP_SND_BUF. It is the amount of space which must be available in the tcp snd_buf for select to return writable */ #define TCP_SNDLOWAT (TCP_SND_BUF/2) /* TCP receive window. */ #define TCP_WND 8096//32768// /* Maximum number of retransmissions of data segments. */ #define TCP_MAXRTX 12 /* Maximum number of retransmissions of SYN segments. */ #define TCP_SYNMAXRTX 4 /*enable the prober to test tcp active */ #define LWIP_TCP_KEEPALIVE 1 /* ---------- ARP options ---------- */ #define ARP_TABLE_SIZE 10 #define ARP_QUEUEING 1 /** * - If enabled, cache entries are generated for every kind of ARP traffic or * broadcast IP traffic. This enhances behaviour for sending to a dynamic set * of hosts, for example if acting as a gateway. * - If disabled, cache entries are generated only for IP destination addresses * in use by lwIP or applications. This enhances performance if sending to a small, * reasonably static number of hosts. Typically for embedded devices. */ //#define ETHARP_ALWAYS_INSERT 0 /* ---------- IP options ---------- */ /* Define IP_FORWARD to 1 if you wish to have the ability to forward IP packets across network interfaces. If you are going to run lwIP on a device with only one network interface, define this to 0. */ #define IP_FORWARD 1 /* IP reassembly and segmentation.These are orthogonal even * if they both deal with IP fragments */ #define IP_REASSEMBLY 1 #define IP_FRAG 1 /* ---------- ICMP options ---------- */ #define ICMP_TTL 255 /* ---------- DHCP options ---------- */ /* Define LWIP_DHCP to 1 if you want DHCP configuration of interfaces. DHCP is not implemented in lwIP 0.5.1, however, so turning this on does currently not work. */ #define LWIP_DHCP 0 /* 1 if you want to do an ARP check on the offered address (recommended). */ #define DHCP_DOES_ARP_CHECK 0 /* ---------- UDP options ---------- */ #define LWIP_UDP 1 #define UDP_TTL 255 /*----------Sokcet options----------*/ #ifdef _NCU #define LWIP_COMPAT_SOCKETS 1 #define LWIP_SOCKET 1 #define LWIP_NETCONN 1 #else // UP_ROUTER,DOWN_ROUTER #define LWIP_COMPAT_SOCKETS 0 #define LWIP_SOCKET 0 #define LWIP_NETCONN 0 #endif /* ---------- Statistics options ---------- */ #ifdef LWIP_STATS #define LINK_STATS #define IP_STATS #define ICMP_STATS #define UDP_STATS #define TCP_STATS #define MEM_STATS #define MEMP_STATS #define PBUF_STATS #define SYS_STATS #endif /* LWIP_STATS */ /* ---------- PPP options ---------- */ #define PPP_SUPPORT 1 /* Set > 0 for PPP */ #if PPP_SUPPORT > 0 #define NUM_PPP 1 /* Max PPP sessions. */ /* Select modules to enable. Ideally these would be set in the makefile but * we're limited by the command line length so you need to modify the settings * in this file. */ #define PAP_SUPPORT 0 /* Set > 0 for PAP. */ #define CHAP_SUPPORT 0 /* Set > 0 for CHAP. */ #define MSCHAP_SUPPORT 0 /* Set > 0 for MSCHAP (NOT FUNCTIONAL!) */ #define CBCP_SUPPORT 0 /* Set > 0 for CBCP (NOT FUNCTIONAL!) */ #define CCP_SUPPORT 0 /* Set > 0 for CCP (NOT FUNCTIONAL!) */ #define VJ_SUPPORT 0 /* Set > 0 for VJ header compression. */ #define MD5_SUPPORT 0 /* Set > 0 for MD5 (see also CHAP) */ /* // for TI C6000 DSP target, struct align.... */ //------------------------------------------------ #define ETH_PAD_SIZE 2 //------------------------------------------------ /* * Timeouts. */ #define FSM_DEFTIMEOUT 2 /* Timeout time in seconds */ #define FSM_DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */ #define FSM_DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */ #define FSM_DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */ #define UPAP_DEFTIMEOUT 6 /* Timeout (seconds) for retransmitting req */ #define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */ #define CHAP_DEFTIMEOUT 6 /* Timeout time in seconds */ #define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */ /* Interval in seconds between keepalive echo requests, 0 to disable. */ #if 1 #define LCP_ECHOINTERVAL 0 #else #define LCP_ECHOINTERVAL 10 #endif /* Number of unanswered echo requests before failure. */ #define LCP_MAXECHOFAILS 3 /* Max Xmit idle time (in jiffies) before resend flag char. */ #define PPP_MAXIDLEFLAG 100 /* * Packet sizes * * Note - lcp shouldn't be allowed to negotiate stuff outside these * limits. See lcp.h in the pppd directory. * (XXX - these constants should simply be shared by lcp.c instead * of living in lcp.h) */ #define PPP_MTU 1500 /* Default MTU (size of Info field) */ #if 0 #define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN) #else #define PPP_MAXMTU 1500 /* Largest MTU we allow */ #endif #define PPP_MINMTU 64 #define PPP_MRU 1500 /* default MRU = max length of info field */ #define PPP_MAXMRU 1500 /* Largest MRU we allow */ #define PPP_DEFMRU 296 /* Try for this */ #define PPP_MINMRU 128 /* No MRUs below this */ #define MAXNAMELEN 256 /* max length of hostname or name for auth */ #define MAXSECRETLEN 256 /* max length of password or secret */ #endif /* PPP_SUPPORT > 0 */ /*status information statistics */ #define PBUF_STATS 1 #endif /* __LWIPOPTS_H__ */