I think this the default setting. There must have a silence of 2 or 3 seconds
between two tracks and when I say silence, it means that the vu-meter must
nothing. At the end of a track, you may have the mpression that there s silence
but there's still a little entry level. The problem with LP (are LP vinyl
discs?) is there's always a little parasite noises caused by the sapphire on
the disc.
It seems that you have no other solution than putting the track marks manually.
Marc a écrit:
> Can the R70 be set to place an automatic T Mark or index mark, when the
> silence between cuts off an LP is of sufficient length?
>
> Can any of the following do so, and how often did they miss a Mark, (ie. I
> assume if the silence is too short, it will not get marked.):
> Sony R90
> Sony R55
> Sharp 831
> Sharp 821
>
> Do all these units (including R70) sample at 20 bits? (not related to T Mark
> ?)
>
> The problem is, when I record the whole side of an LP, unattended, I later
> have to FF through the MD and manually mark the beginning of each cut. What
> a waste of time. Such an easy function is unexcusable not to have as an
> on/off option. Even if the function overmarked a bit, that is easy to
> correct and not even necessary to correct.
>
> Thanks, Marc
> -----------------------------------------------------------------
> To stop getting this list send a message containing just the word
> "unsubscribe" to [EMAIL PROTECTED]
-----------------------------------------------------------------
To stop getting this list send a message containing just the word
"unsubscribe" to [EMAIL PROTECTED]
