Karel Kulhavy wrote:
I've been running spamassassin learning which loaded the system. Then I
started X Windows System with "startx". During normal startup, a screen of
garbage flashes and is replaced with black screen and then with X background.
If you are talking about screen corruption happening when you switch
between X and the character terminal then I have too had that a few
times since the switch to xenocara.
---
Lars Hansson
OpenBSD 4.1-current (GENERIC.ACPI) #4: Wed Apr 11 17:10:58 PHT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.ACPI
cpu0: Intel(R) Celeron(R) M processor 1.30GHz ("GenuineIntel" 686-class)
1.30 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 502820864 (491036K)
avail mem = 450990080 (440420K)
using 4278 buffers containing 25264128 bytes (24672K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 05/21/01, BIOS32 rev. 0 @ 0xe9b90,
SMBIOS rev. 2.3 @ 0xeb160 (43 entries)
bios0: Sole Corporation Montara-GML
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xe7000/0x661
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe840/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc800! 0xe0000/0x1800 0xe6000/0x1000!
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP BOOT DBGP SSDT
acpitimer at acpi0 not configured
acpiprt0 at acpi0: bus 1 (PCI2)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0: EC0_
acpicpu at acpi0 not configured
acpitz0 at acpi0, critical temperature: 95 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0: model: TS44 serial: type: LION oem: Sole
acpibtn2 at acpi0: LID_
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not
configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at
0xb0000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub0: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 1
cbb0 at pci1 dev 0 function 0 "TI PCI1410 CardBus" rev 0x02: irq 5
rl0 at pci1 dev 2 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:e0:4c:44:00:4e
rlphy0 at rl0 phy 0: RTL internal PHY
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x40
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2040AT>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, CDRW/DVD SBW-243, TX08> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x03: irq 5
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 5,
ICH4 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
usb2 at uhci1: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask efe5 netmask efe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ural0 at uhub0 port 2
ural0: Ralink 802.11g WLAN + Pen Drive, rev 2.00/0.01, addr 2
acpibat0: BAT0: removed
ural0: MAC/BBP RT2570 (rev 0x05), RF RT2526, address 00:02:44:b5:ad:f1
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
