On Wed, 2015-09-02 at 17:03 +0200, Aleksander Morgado wrote: > On Wed, Sep 2, 2015 at 4:53 PM, Highland, Glenn <glenn.highl...@digi.com> > wrote: > > > > Aleksander suggested that I propose the change below to the mailing list. > > > > Essentially we're encountering a problem with SMS notifications not being > > received > > by the application from ModemManager v1.4.6 (and v1.4.10 for that matter). > > This > > is using a Telit HE910-D that has two USB endpoints (in our case ttyACM0 and > > ttyACM3). > > > > The Telit HE910-D needs to be configured with the AT+CNMI=2,1,2,1,0 command > > on > > both the primary and secondary ports as confirmed by Telit Support. > > Currently > > that command is performed only on the primary port, which is reserved for > > PPP > > I/O after connection to the provider network. The secondary port's New > > Message Indication configuration remains at 0,0,0,0 which (in summary) > > causes > > the modem to discard inbound messages without storing them. Hence > > ModemManager > > does not get notified of a newly-received SMS. > > > > Does an update to mm-broadband-modem.c seem reasonable to everyone? > > The specific suggestion I'm doing is to run the CNMI settings command > in both the primary and the secondary ports for all AT-based modems, > not just in the primary port - but don't fail the operation if setting > it in the secondary port fails (e.g. for the case where secondary port > is a very limited or not-fully-functional AT interpreter).
That sounds like the right approach to me... Dan _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
