On Apr 12, 4:30 am, "Sisyphus" <sisyph...@optusnet.com.au> wrote: > ----- Original Message ----- > From: "jason" <ja...@njkfrudils.plus.com> > To: "mpir-devel" <mpir-devel@googlegroups.com> > Sent: Tuesday, April 12, 2011 4:33 AM > Subject: [mpir-devel] Re: MinGW64 - undefined reference to gmpn symbols. > > > Hi > > > I just tried it again , and it works fine for me , I can give > > gcc-4.6.0 a go to see if that causes any problems , the only other > > difference is that you have set RANLIB , I never did . > > I also subsequently used a gcc-4.4.4 build (by sezero), where it's only > necessary to run: > > ./configure --enable-gmpcompat --prefix=/c/_64/mpir ABI=64 && make && make > check > > (though I now doubt there's any need to specify "ABI=64"). > Same problem occurs for me. > > > I suppose the > > shell might be cause , can you try it in cygwin ? as a cross > > compiler , again this worked for me. > > I have Cygwin - I might try to grab the appropriate compiler later and see > if the cross-compilation works. > However, I'd much prefer to get the build working with the msys shell - as > it should. > > There was some mention of the decoration of the gmpn symbols, and using > objdump to look at them. > > So I've done an 'objdump -t libgmp.a >syms.txt', and looking through > syms.txt I see something odd wrt the symbols that are mentioned in the > 'undefined reference' messages. (Bear in mind that I don't really know what > I'm looking at, here.) > > For example, 2 of those undefined references are __gmpn_lshift and > __gmpn_rshift. Looking through syms.txt I notice that both of those symbols > occur in a number of places and that mostly they're prefixed with 3 leading > underscores. But there's a section where they get prefixed by only 2 > underscores: > > ############################################ > lshift.o: file format pe-x86-64 > > SYMBOL TABLE: > [ 0](sec -2)(fl 0x00)(ty 0)(scl 103) (nx 1) 0x0000000000000000 lshift.as > File > [ 2](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x0000000000000000 .text > AUX scnlen 0x101 nreloc 0 nlnno 0 > [ 4](sec 1)(fl 0x00)(ty 0)(scl 2) (nx 0) 0x0000000000000000 > __gmpn_lshift > [ 5](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000094 > __gmpn_lshift.2 > [ 6](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000030 > __gmpn_lshift.1 > [ 7](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x00000000000000ce > __gmpn_lshift.3 > [ 8](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x00000000000000f8 > __gmpn_lshift.4 > [ 9](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000101 end > > rshift.o: file format pe-x86-64 > > SYMBOL TABLE: > [ 0](sec -2)(fl 0x00)(ty 0)(scl 103) (nx 1) 0x0000000000000000 rshift.as > File > [ 2](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x0000000000000000 .text > AUX scnlen 0x178 nreloc 0 nlnno 0 > [ 4](sec 1)(fl 0x00)(ty 0)(scl 2) (nx 0) 0x0000000000000000 > __gmpn_rshift > [ 5](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x00000000000000a5 > __gmpn_rshift.2 > [ 6](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000040 > __gmpn_rshift.1 > [ 7](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000170 > __gmpn_rshift.6 > [ 8](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000150 > __gmpn_rshift.5 > [ 9](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000110 > __gmpn_rshift.4 > [ 10](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x00000000000000b7 > __gmpn_rshift.3 > [ 11](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000178 end > ####################################################### > > With my (problem-free) 32-bit build it's 3 leading underscores all the way > through - the corresponding section is quite different: > > ####################################################### > lshift.o: file format pe-i386 > > SYMBOL TABLE: > [ 0](sec -2)(fl 0x00)(ty 0)(scl 103) (nx 1) 0x00000000 fake > File > [ 2](sec 1)(fl 0x00)(ty 20)(scl 2) (nx 1) 0x00000000 ___gmpn_lshift > AUX tagndx 0 ttlsiz 0x0 lnnos 0 next 0 > [ 4](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x00000000 .text > AUX scnlen 0x205 nreloc 1 nlnno 0 > [ 6](sec 2)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x00000000 .data > AUX scnlen 0x0 nreloc 0 nlnno 0 > [ 8](sec 3)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x00000000 .bss > AUX scnlen 0x0 nreloc 0 nlnno 0 > > rshift.o: file format pe-i386 > > SYMBOL TABLE: > [ 0](sec -2)(fl 0x00)(ty 0)(scl 103) (nx 1) 0x00000000 fake > File > [ 2](sec 1)(fl 0x00)(ty 20)(scl 2) (nx 1) 0x00000000 ___gmpn_rshift > AUX tagndx 0 ttlsiz 0x0 lnnos 0 next 0 > [ 4](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x00000000 .text > AUX scnlen 0x1f8 nreloc 1 nlnno 0 > [ 6](sec 2)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x00000000 .data > AUX scnlen 0x0 nreloc 0 nlnno 0 > [ 8](sec 3)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x00000000 .bss > AUX scnlen 0x0 nreloc 0 nlnno 0 > ####################################################### > > For symbols not mentioned in the 'undefined reference' messages, it seems > that they are *always* prefixed with 3 underscores in libgmp.a. > > Anything in that ? > If not, what should I be looking at ? > > Cheers, > Rob
Cheers , I cant get any errors at all , I've tried the latest MSYS install and gcc ie http://sourceforge.net/projects/mingw/files/Automated%20MinGW%20Installer/mingw-get-inst/mingw-get-inst-20110316/mingw-get-inst-20110316.exe/download and mingw-w64-1.0-bin_i686-mingw-20110408.zip running objdump on the lib I get this lshift.o: file format pe-x86-64 SYMBOL TABLE: [ 0](sec -2)(fl 0x00)(ty 0)(scl 103) (nx 1) 0x0000000000000000 lshift.as File [ 2](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x0000000000000000 .text AUX scnlen 0x11c nreloc 0 nlnno 0 [ 4](sec 1)(fl 0x00)(ty 0)(scl 2) (nx 0) 0x0000000000000000 __gmpn_lshift [ 5](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x000000000000006f __gmpn_lshift. 2 [ 6](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000030 __gmpn_lshift. 1 [ 7](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000090 __gmpn_lshift. 4 [ 8](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x00000000000000d0 __gmpn_lshift. 5 [ 9](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000100 __gmpn_lshift. 6 [ 10](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x000000000000007d __gmpn_lshift. 3 [ 11](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000114 __gmpn_lshift. 7 [ 12](sec 2)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x0000000000000000 .xdata AUX scnlen 0xc nreloc 0 nlnno 0 [ 14](sec 3)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x0000000000000000 .pdata AUX scnlen 0xc nreloc 3 nlnno 0 [ 16](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x000000000000011c end rshift.o: file format pe-x86-64 SYMBOL TABLE: [ 0](sec -2)(fl 0x00)(ty 0)(scl 103) (nx 1) 0x0000000000000000 rshift.as File [ 2](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x0000000000000000 .text AUX scnlen 0x120 nreloc 0 nlnno 0 [ 4](sec 1)(fl 0x00)(ty 0)(scl 2) (nx 0) 0x0000000000000000 __gmpn_rshift [ 5](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x000000000000006f __gmpn_rshift. 2 [ 6](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000030 __gmpn_rshift. 1 [ 7](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000110 __gmpn_rshift. 6 [ 8](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x00000000000000f0 __gmpn_rshift. 5 [ 9](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x00000000000000c0 __gmpn_rshift. 4 [ 10](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x000000000000007d __gmpn_rshift. 3 [ 11](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000118 __gmpn_rshift. 7 [ 12](sec 2)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x0000000000000000 .xdata AUX scnlen 0xc nreloc 0 nlnno 0 [ 14](sec 3)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x0000000000000000 .pdata AUX scnlen 0xc nreloc 3 nlnno 0 [ 16](sec 1)(fl 0x00)(ty 0)(scl 3) (nx 0) 0x0000000000000120 end Note: only two underscores , the only symbol that has three underscores is chkstk , which is a problem if we link the mingw64 library with MSVC Can you post the output of config.log Cheers Jason -- You received this message because you are subscribed to the Google Groups "mpir-devel" group. To post to this group, send email to mpir-devel@googlegroups.com. To unsubscribe from this group, send email to mpir-devel+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/mpir-devel?hl=en.
