A fundamental effect of spoofing addresses from your local subnet is that when the packets reach their target, the source addresses are meaningful. I realize that the traceability of these packets has already been mentioned, but I want to point out the profound difference between a DDoS attack with meaningful vs. meaningless source addresses.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:owner-nanog@;merit.edu] On Behalf Of Hank Nussbacher Sent: Wednesday, October 30, 2002 2:27 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: no ip forged-source-address On Wed, 30 Oct 2002 [EMAIL PROTECTED] wrote: If every router in the world did this I could still use spoofed IP addresses and DDOS someone. My little program could determine what subnet I am on, check what other hosts are alive on the subnet and then when it decides to attack, it would use some neighbor's IP. The subnet I am on is a /24 and there very well may be a few dozen hosts. I could be real sneaky and alter my IP randomly to be any of my neighbors for every packet I send out. Traceback would get me instantly back to the offending subnet but then it would take a bit of digging on the network admin to track me down and applying RPF checking won't help. RPF checking can only go so far. You would need RPF checking down to the host level and I haven't heard anyone discuss that yet. -Hank > > Hi, > > I've been following the discussion on DDoS attacks over the last few weeks > and our network has also recently been the target of a sustained DDoS > attack.I'm not alone in believing that source address filters are the > simplest way to prevent the types of DDoS traffic that we have all been > seeing with increasing regularity.Reading the comments on this list have > lead me to believe that there is a lot of inertia involved in applying > what appears to me as very simple filters. > > As with the smurf attacks a few years ago, best practice documents and > RFC's don't appear to be effective.I realise that configuring and > applying a source address filter is trivial, but not enough network admins > seem to be taking the time to lock this down.If the equipment had > sensible defaults (with the option to bypass them if required), then > perhaps this would be less of an issue. > > Therefore, would it be a reasonable suggestion to ask router vendors to > source address filtering in as an option[1] on the interface and then move > it to being the default setting[2] after a period of time?This appeared > to have some success with reducing the number of networks that forwarded > broadcast packets (as with "no ip directed-broadcast"). > > Just my $0.02, > > > Richard Morrell > edNET > > [1] For example, an IOS config might be: > > interface fastethernet 1/0 > no ip forged-source-address > > [2] Network admins would still have the option of turning it off, but this > would have to be explicitly configured. > > >