early console in setup code
early console in extract_kernel
input_data: 0x0000000002e25276
input_len: 0x0000000000c5abe7
output: 0x0000000001000000
output_len: 0x0000000002385830
kernel_total_size: 0x0000000002aa0000

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[    0.000000] Linux version 4.14.0-rc7-02177-g3bc58b1 (kbuild@xian) (gcc version 6.4.0 20171026 (Debian 6.4.0-9)) #1 SMP PREEMPT Fri Nov 17 04:36:59 CST 2017
[    0.000000] Command line: ip=::::vm-lkp-st01-yocto-ia32-10::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-st01-yocto-ia32-10/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-3bc58b1a49b4179db035ca1da289abc0f25a4df2-20171117-77192-6zmpqc-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s4-11170105 branch=linux-devel/devel-hourly-2017111620 commit=3bc58b1a49b4179db035ca1da289abc0f25a4df2 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s4-11170105/gcc-6/3bc58b1a49b4179db035ca1da289abc0f25a4df2/vmlinuz-4.14.0-rc7-02177-g3bc58b1 max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-lkp-st01-yocto-ia32/yocto-tiny-i386-2016-04-22.cgz/x86_64-randconfig-s4-11170105/gcc-6/3bc58b1a49b4179db035ca1da289abc0f25a4df2/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0
[    0.000000] KERNEL supported cpus:
[    0.000000]   Centaur CentaurHauls
[    0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init.
[    0.000000] CPU: Your system may be unstable.
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001a3dffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001a3e0000-0x000000001a3fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] Hypervisor detected: KVM
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1a3e0 max_arch_pfn = 0x400000000
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x03a8a000, 0x03a8afff] PGTABLE
[    0.000000] BRK [0x03a8b000, 0x03a8bfff] PGTABLE
[    0.000000] BRK [0x03a8c000, 0x03a8cfff] PGTABLE
[    0.000000] BRK [0x03a8d000, 0x03a8dfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1a065000-0x1a3dffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F68D0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001A3E15CE 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000001A3E142A 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000001A3E0040 0013EA (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000001A3E0000 000040
[    0.000000] ACPI: APIC 0x000000001A3E151E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000001A3E1596 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000001a3dffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1a062000-0x1a064fff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1a061001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 707797684 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x000000001a3dffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001a3dffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001a3dffff]
[    0.000000] On node 0 totalpages: 107390
[    0.000000]   DMA32 zone: 1470 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 107390 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x1a400000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: fast init done
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff880019e00000 s116104 r0 d31352 u2097152
[    0.000000] pcpu-alloc: s116104 r0 d31352 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 19e0c800
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 105899
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: ip=::::vm-lkp-st01-yocto-ia32-10::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-st01-yocto-ia32-10/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-3bc58b1a49b4179db035ca1da289abc0f25a4df2-20171117-77192-6zmpqc-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s4-11170105 branch=linux-devel/devel-hourly-2017111620 commit=3bc58b1a49b4179db035ca1da289abc0f25a4df2 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s4-11170105/gcc-6/3bc58b1a49b4179db035ca1da289abc0f25a4df2/vmlinuz-4.14.0-rc7-02177-g3bc58b1 max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-lkp-st01-yocto-ia32/yocto-tiny-i386-2016-04-22.cgz/x86_64-randconfig-s4-11170105/gcc-6/3bc58b1a49b4179db035ca1da289abc0f25a4df2/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprint
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Memory: 374960K/429560K available (18089K kernel code, 4035K rwdata, 7024K rodata, 1348K init, 11284K bss, 54600K reserved, 0K cma-reserved)
[    0.003333] Preemptible hierarchical RCU implementation.
[    0.003333] 	RCU event tracing is enabled.
[    0.003333] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
[    0.003333] 	RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout).
[    0.003333] 	Tasks RCU enabled.
[    0.003333] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.003333] NR_IRQS: 4352, nr_irqs: 48, preallocated irqs: 16
[    0.003333] 	Offload RCU callbacks from CPUs: .
[    0.003333] console [ttyS0] enabled
[    0.003333] console [ttyS0] enabled
[    0.003333] bootconsole [earlyser0] disabled
[    0.003333] bootconsole [earlyser0] disabled
[    0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.003333] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.003333] ... MAX_LOCK_DEPTH:          48
[    0.003333] ... MAX_LOCKDEP_KEYS:        8191
[    0.003333] ... CLASSHASH_SIZE:          4096
[    0.003333] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.003333] ... MAX_LOCKDEP_CHAINS:      65536
[    0.003333] ... CHAINHASH_SIZE:          32768
[    0.003333]  memory used by lock dependency info: 7359 kB
[    0.003333]  per task-struct memory footprint: 1920 bytes
[    0.003333] ------------------------
[    0.003333] | Locking API testsuite:
[    0.003333] ----------------------------------------------------------------------------
[    0.003333]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.003333]   --------------------------------------------------------------------------
[    0.003333]                      A-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[    0.003333]                  A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[    0.003333]              A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[    0.003333]              A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[    0.003333]          A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[    0.003333]          A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[    0.003333]          A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[    0.003333]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]   --------------------------------------------------------------------------
[    0.003333]               recursive read-lock:             |  ok  |             |failed|
[    0.003333]            recursive read-lock #2:             |  ok  |             |failed|
[    0.003333]             mixed read-write-lock:             |failed|             |failed|
[    0.003333]             mixed write-read-lock:             |failed|             |failed|
[    0.003333]   mixed read-lock/lock-write ABBA:             |failed|             |failed|
[    0.003333]    mixed read-lock/lock-read ABBA:             |  ok  |             |failed|
[    0.003333]  mixed write-lock/lock-write ABBA:             |failed|             |failed|
[    0.003333]   --------------------------------------------------------------------------
[    0.003333]      hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.003333]      soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.003333]      hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.003333]      soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.003333]        sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
[    0.003333]        sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
[    0.003333]          hard-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.003333]          soft-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.003333]          hard-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.003333]          soft-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.003333]       hard-irq lock-inversion/123:failed|failed|  ok  |
[    0.003333]       soft-irq lock-inversion/123:failed|failed|  ok  |
[    0.003333]       hard-irq lock-inversion/132:failed|failed|  ok  |
[    0.003333]       soft-irq lock-inversion/132:failed|failed|  ok  |
[    0.003333]       hard-irq lock-inversion/213:failed|failed|  ok  |
[    0.003333]       soft-irq lock-inversion/213:failed|failed|  ok  |
[    0.003333]       hard-irq lock-inversion/231:failed|failed|  ok  |
[    0.003333]       soft-irq lock-inversion/231:failed|failed|  ok  |
[    0.003333]       hard-irq lock-inversion/312:failed|failed|  ok  |
[    0.003333]       soft-irq lock-inversion/312:failed|failed|  ok  |
[    0.003333]       hard-irq lock-inversion/321:failed|failed|  ok  |
[    0.003333]       soft-irq lock-inversion/321:failed|failed|  ok  |
[    0.003333]       hard-irq read-recursion/123:  ok  |
[    0.003333]       soft-irq read-recursion/123:  ok  |
[    0.003333]       hard-irq read-recursion/132:  ok  |
[    0.003333]       soft-irq read-recursion/132:  ok  |
[    0.003333]       hard-irq read-recursion/213:  ok  |
[    0.003333]       soft-irq read-recursion/213:  ok  |
[    0.003333]       hard-irq read-recursion/231:  ok  |
[    0.003333]       soft-irq read-recursion/231:  ok  |
[    0.003333]       hard-irq read-recursion/312:  ok  |
[    0.003333]       soft-irq read-recursion/312:  ok  |
[    0.003333]       hard-irq read-recursion/321:  ok  |
[    0.003333]       soft-irq read-recursion/321:  ok  |
[    0.003333]   --------------------------------------------------------------------------
[    0.003333]   | Wound/wait tests |
[    0.003333]   ---------------------
[    0.003333]                   ww api failures:  ok  |  ok  |  ok  |
[    0.003333]                ww contexts mixing:failed|  ok  |
[    0.003333]              finishing ww context:  ok  |  ok  |  ok  |  ok  |
[    0.003333]                locking mismatches:  ok  |  ok  |  ok  |
[    0.003333]                  EDEADLK handling:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]            spinlock nest unlocked:  ok  |
[    0.003333]   -----------------------------------------------------
[    0.003333]                                  |block | try  |context|
[    0.003333]   -----------------------------------------------------
[    0.003333]                           context:failed|  ok  |  ok  |
[    0.003333]                               try:failed|  ok  |failed|
[    0.003333]                             block:failed|  ok  |failed|
[    0.003333]                          spinlock:failed|  ok  |failed|
[    0.003333] --------------------------------------------------------
[    0.003333] 153 out of 262 testcases failed, as expected. |
[    0.003333] ----------------------------------------------------
[    0.003333] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.003333] hpet clockevent registered
[    0.003360] tsc: Detected 2660.008 MHz processor
[    0.004250] Calibrating delay loop (skipped) preset value.. 5322.68 BogoMIPS (lpj=8866693)
[    0.004890] pid_max: default: 4096 minimum: 301
[    0.006720] ACPI: Core revision 20170728
[    0.014239] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.016075] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.016927] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.018278] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.020025] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.022072] mce: CPU supports 10 MCE banks
[    0.022869] mce: unknown CPU type - not enabling MCE support
[    0.023346] numa_add_cpu cpu 0 node 0: mask now 0
[    0.024242] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.025248] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.286753] Freeing SMP alternatives memory: 52K
[    0.290396] smpboot: Max logical packages: 1
[    0.291750] enabled ExtINT on CPU#0
[    0.294655] ENABLING IO-APIC IRQs
[    0.295394] init IO_APIC IRQs
[    0.296678]  apic 0 pin 0 not connected
[    0.297490] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.299065] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.299999] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.299999] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.299999] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.299999] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.299999] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.299999] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.299999] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.299999] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.299999] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.299999] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.299999] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.299999] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.299999] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.299999]  apic 0 pin 16 not connected
[    0.299999]  apic 0 pin 17 not connected
[    0.299999]  apic 0 pin 18 not connected
[    0.299999]  apic 0 pin 19 not connected
[    0.299999]  apic 0 pin 20 not connected
[    0.299999]  apic 0 pin 21 not connected
[    0.299999]  apic 0 pin 22 not connected
[    0.299999]  apic 0 pin 23 not connected
[    0.299999] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.299999] Using local APIC timer interrupts.
[    0.299999] calibrating APIC timer ...
[    0.303333] ... lapic delta = 6250106
[    0.303333] ... PM-Timer delta = 357962
[    0.303333] ... PM-Timer result ok
[    0.303333] ..... delta 6250106
[    0.303333] ..... mult: 268440035
[    0.303333] ..... calibration result: 3333389
[    0.303333] ..... CPU clock speed is 2660.1123 MHz.
[    0.303333] ..... host bus clock speed is 1000.0389 MHz.
[    0.303423] smpboot: CPU0: GenuineIntel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[    0.316720] Performance Events: no PMU driver, software events only.
[    0.323350] Hierarchical SRCU implementation.
[    0.343349] smp: Bringing up secondary CPUs ...
[    0.344417] smp: Brought up 1 node, 1 CPU
[    0.345349] smpboot: Total of 1 processors activated (5322.68 BogoMIPS)
[    0.347508] pgdatinit0 (14) used greatest stack depth: 15112 bytes left
[    0.349322] devtmpfs: initialized
[    0.350414] x86/mm: Memory block size: 128MB
[    0.353938] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.356187] futex hash table entries: 16 (order: -1, 2048 bytes)
[    0.356849] xor: measuring software checksum speed
[    0.390025]    prefetch64-sse:  9650.400 MB/sec
[    0.423352]    generic_sse:  8649.600 MB/sec
[    0.424156] xor: using function: prefetch64-sse (9650.400 MB/sec)
[    0.425293] pinctrl core: initialized pinctrl subsystem
[    0.427012] regulator-dummy: Failed to create debugfs directory
[    0.428864] NET: Registered protocol family 16
[    0.431320] workqueue: round-robin CPU selection forced, expect performance impact
[    0.433385] cpuidle: using governor ladder
[    0.434204] cpuidle: using governor menu
[    0.435569] ACPI: bus type PCI registered
[    0.436498] dca service started, version 1.12.1
[    0.436836] PCI: Using configuration type 1 for base access
[    0.460346] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.526708] raid6: sse2x1   gen()  3520 MB/s
[    0.583351] raid6: sse2x1   xor()  4411 MB/s
[    0.640006] raid6: sse2x2   gen()  6540 MB/s
[    0.696676] raid6: sse2x2   xor()  5378 MB/s
[    0.753341] raid6: sse2x4   gen()  7265 MB/s
[    0.810007] raid6: sse2x4   xor()  5143 MB/s
[    0.810815] raid6: using algorithm sse2x4 gen() 7265 MB/s
[    0.811816] raid6: .... xor() 5143 MB/s, rmw enabled
[    0.812739] raid6: using intx1 recovery algorithm
[    0.813596] gpio-f7188x: Not a Fintek device at 0x0000002e
[    0.814679] gpio-f7188x: Not a Fintek device at 0x0000004e
[    0.816024] ACPI: Added _OSI(Module Device)
[    0.816674] ACPI: Added _OSI(Processor Device)
[    0.817503] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.818380] ACPI: Added _OSI(Processor Aggregator Device)
[    0.825737] ACPI: Interpreter enabled
[    0.826500] ACPI: (supports S0 S3 S4 S5)
[    0.826676] ACPI: Using IOAPIC for interrupt routing
[    0.827664] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.830579] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.849777] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.850016] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments]
[    0.851251] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.853386] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.855689] PCI host bridge to bus 0000:00
[    0.856463] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.856675] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.857932] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.860008] pci_bus 0000:00: root bus resource [mem 0x1a400000-0xfebfffff window]
[    0.861402] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.862507] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.865316] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.868073] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.873870] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    0.876725] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.878057] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.879258] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.880008] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.883535] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.885393] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.886690] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.888763] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.892489] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.896710] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.906711] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.909036] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.911927] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.914759] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.924741] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.927462] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    0.929353] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    0.938740] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.940268] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.941784] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.943295] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.943531] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.947423] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.948535] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.950008] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.951073] vgaarb: loaded
[    0.954454] SCSI subsystem initialized
[    0.955245] libata version 3.00 loaded.
[    0.956290] pps_core: LinuxPPS API ver. 1 registered
[    0.956685] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.958373] PTP clock support registered
[    0.960183] PCI: Using ACPI for IRQ routing
[    0.960965] PCI: pci_cache_line_size set to 64 bytes
[    0.962099] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.963223] e820: reserve RAM buffer [mem 0x1a3e0000-0x1bffffff]
[    0.963884] Bluetooth: Core ver 2.22
[    0.964619] NET: Registered protocol family 31
[    0.965451] Bluetooth: HCI device and connection manager initialized
[    0.966683] Bluetooth: HCI socket layer initialized
[    0.967592] Bluetooth: L2CAP socket layer initialized
[    0.968593] Bluetooth: SCO socket layer initialized
[    0.970034] NET: Registered protocol family 8
[    0.970864] NET: Registered protocol family 20
[    0.972016] nfc: nfc_init: NFC Core ver 0.1
[    0.973370] NET: Registered protocol family 39
[    0.977287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.978204] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.983412] clocksource: Switched to clocksource kvm-clock
[    0.999220] Warning: could not register annotated branches stats
[    1.134980] VFS: Disk quotas dquot_6.6.0
[    1.135855] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.137483] FS-Cache: Loaded
[    1.138297] CacheFiles: Loaded
[    1.138968] pnp: PnP ACPI init
[    1.139807] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.141217] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.142577] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.143845] pnp 00:03: [dma 2]
[    1.144505] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.145972] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.147411] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.148853] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.151038] pnp: PnP ACPI: found 7 devices
[    1.158716] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.160679] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.161830] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.162980] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.164266] pci_bus 0000:00: resource 7 [mem 0x1a400000-0xfebfffff window]
[    1.165845] NET: Registered protocol family 2
[    1.167509] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    1.168980] TCP bind hash table entries: 4096 (order: 6, 262144 bytes)
[    1.170436] TCP: Hash tables configured (established 4096 bind 4096)
[    1.171867] UDP hash table entries: 256 (order: 3, 40960 bytes)
[    1.173025] UDP-Lite hash table entries: 256 (order: 3, 40960 bytes)
[    1.174482] NET: Registered protocol family 1
[    1.186923] RPC: Registered named UNIX socket transport module.
[    1.188020] RPC: Registered udp transport module.
[    1.188891] RPC: Registered tcp transport module.
[    1.189759] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.190998] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.192116] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.193213] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.194461] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.196048] PCI: CLS 0 bytes, default 64
[    1.197195] Unpacking initramfs...
[    2.140474] Freeing initrd memory: 3564K
[    2.142371] Scanning for low memory corruption every 60 seconds
[    2.144018] cryptomgr_test (28) used greatest stack depth: 14968 bytes left
[    2.148679] AVX or AES-NI instructions are not detected.
[    2.149683] CPU feature 'AVX registers' is not supported.
[    2.150731] CPU feature 'AVX registers' is not supported.
[    2.151740] CPU feature 'AVX registers' is not supported.
[    2.152866] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    2.156198] spin_lock-torture: Creating torture_shuffle task
[    2.157742] spin_lock-torture: Creating torture_stutter task
[    2.158856] spin_lock-torture: torture_shuffle task started
[    2.159911] spin_lock-torture: Creating lock_torture_writer task
[    2.161141] spin_lock-torture: torture_stutter task started
[    2.162195] spin_lock-torture: Creating lock_torture_writer task
[    2.163413] spin_lock-torture: lock_torture_writer task started
[    2.164531] spin_lock-torture: Creating lock_torture_stats task
[    2.165691] spin_lock-torture: lock_torture_writer task started
[    2.167664] audit: initializing netlink subsys (disabled)
[    2.168769] spin_lock-torture: lock_torture_stats task started
[    2.170422] Key type blacklist registered
[    2.171286] audit: type=2000 audit(1510864747.730:1): state=initialized audit_enabled=0 res=1
[    2.172921] workingset: timestamp_bits=56 max_order=17 bucket_order=0
[    2.174292] zbud: loaded
[    2.180348] NFS: Registering the id_resolver key type
[    2.181306] Key type id_resolver registered
[    2.182132] Key type id_legacy registered
[    2.187050] Key type cifs.spnego registered
[    2.187867] ntfs: driver 2.1.32 [Flags: R/W DEBUG].
[    2.189130] JFS: nTxBlock = 2957, nTxLock = 23661
[    2.192925] NILFS version 2 loaded
[    2.200048] OCFS2 User DLM kernel interface loaded
[    2.220478] gfs2: GFS2 installed
[    2.221396] FS-Cache: Netfs 'ceph' registered for caching
[    2.222414] ceph: loaded (mds proto 32)
[    2.242244] NET: Registered protocol family 38
[    2.243316] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.244733] io scheduler noop registered
[    2.245468] io scheduler deadline registered (default)
[    2.246465] io scheduler cfq registered
[    2.247683] io scheduler kyber registered
[    2.248437] test_string_helpers: Running tests...
[    2.252365] test_hexdump: all 1184 tests passed
[    2.253543] test_firmware: interface ready
[    2.260338] test_hash: __hash_32() has no arch implementation to test.
[    2.261538] test_hash: hash_32() has no arch implementation to test.
[    2.262704] test_hash: hash_64() has no arch implementation to test.
[    2.263915] test_hash: 33152 tests passed.
[    2.264689] test_siphash: self-tests: pass
[    2.266488] test passed
[    2.267202] test_printf: all 260 tests passed
[    2.341746] test_bitmap: test 13: input is '0-2047:128/256' OK, Time: 824
[    2.346175] test_bitmap: all 460506 tests passed
[    2.347449] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    2.348383] crc32: self tests passed, processed 225944 bytes in 182932 nsec
[    2.349886] crc32c: CRC_LE_BITS = 64
[    2.350587] crc32c: self tests passed, processed 225944 bytes in 91564 nsec
[    2.367342] crc32_combine: 8373 self tests passed
[    2.383700] crc32c_combine: 8373 self tests passed
[    2.385021] xz_dec_test: module loaded
[    2.385720] xz_dec_test: Create a device node with 'mknod xz_dec_test c 248 0' and write .xz files to it.
[    2.387876] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    2.389167] glob: 64 self-tests passed, 0 failed
[    2.391080] gpio_it87: no device
[    2.391951] gpio-mockup: probe of gpio-mockup failed with error -22
[    2.393714] switchtec: loaded.
[    2.400605] ipmi message handler version 39.2
[    2.401448] ipmi device interface
[    2.402143] IPMI System Interface driver.
[    2.403010] ipmi_si: Unable to find any System Interface(s)
[    2.404098] IPMI Watchdog: driver initialized
[    2.404919] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    2.406591] Warning: Processor Platform Limit event detected, but not handled.
[    2.407958] Consider compiling CPUfreq support into your kernel.
[    2.414073] ioatdma: Intel(R) QuickData Technology Driver 4.00
[    2.474863] r3964: Philips r3964 Driver $Revision: 1.10 $
[    2.475912] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.504491] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.506793] console [ttyS0] disabled
[    2.532669] console [ttyS0] enabled
[    2.557307] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.583025] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.587650] Initializing Nozomi driver 2.1d
[    2.588970] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    2.590349] ac.o: No PCI boards found.
[    2.591064] ac.o: For an ISA board you must supply memory and irq parameters.
[    2.592791] Non-volatile memory driver v1.3
[    2.593828] Linux agpgart interface v0.103
[    2.594846] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    2.596607] dummy-irq: no IRQ given.  Use irq=N
[    2.597632] Phantom Linux Driver, version n0.9.8, init OK
[    2.598905] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[    2.600760] Guest personality initialized and is inactive
[    2.601912] VMCI host device registered (name=vmci, major=10, minor=59)
[    2.603145] Initialized host personality
[    2.605317] NCI uart driver 'nfcmrvl_uart [0]' registered
[    2.606497] Uniform Multi-Platform E-IDE driver
[    2.607491] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[    2.608860] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[    2.610700]     ide0: BM-DMA at 0xc040-0xc047
[    2.611551]     ide1: BM-DMA at 0xc048-0xc04f
[    2.612372] Probing IDE interface ide0...
[    3.146741] tsc: Refined TSC clocksource calibration: 2660.006 MHz
[    3.147922] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2657a9629e5, max_idle_ns: 440795216274 ns
[    3.186878] Probing IDE interface ide1...
[    3.933462] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[    4.613510] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[    4.614816] hdc: MWDMA2 mode selected
[    4.615801] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    4.616762] ide1 at 0x170-0x177,0x376 on irq 15
[    4.619521] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[    4.620934] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[    4.622672]     ide0: BM-DMA at 0xc040-0xc047
[    4.623577]     ide1: BM-DMA at 0xc048-0xc04f
[    4.624403] Probing IDE interface ide0...
[    5.200155] Probing IDE interface ide1...
[    5.943465] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[    6.623539] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[    6.624842] hdc: MWDMA2 mode selected
[    6.625832] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    6.626789] ide1 at 0x170-0x177,0x376 on irq 15
[    6.629046] ide-gd driver 1.18
[    6.629701] ide-cd driver 5.00
[    6.630793] ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache
[    6.631863] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.637253] ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache
[    6.640743] Loading iSCSI transport class v2.0-870.
[    6.646907] rdac: device handler registered
[    6.653378] hp_sw: device handler registered
[    6.654194] emc: device handler registered
[    6.660060] alua: device handler registered
[    6.660856] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[    6.662085] osst :I: Tape driver with OnStream support version 0.99.4
[    6.662085] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    6.664615] SCSI Media Changer driver v0.25 
[    6.676916] Rounding down aligned max_sectors from 4294967295 to 4294967288
[    6.690613] SSFDC read-only Flash Translation layer
[    6.696922] slram: not enough parameters.
[    6.699385] ftl_cs: FTL header not found.
[    6.735837] No valid DiskOnChip devices found
[    6.737335] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    6.739169] ipddp0: Appletalk-IP Decap. mode by Jay Schulist <jschlst@samba.org>
[    6.740592] Fusion MPT base driver 3.04.20
[    6.741365] Copyright (c) 1999-2008 LSI Corporation
[    6.742291] Fusion MPT FC Host driver 3.04.20
[    6.743226] Fusion MPT SAS Host driver 3.04.20
[    6.744148] Fusion MPT misc device (ioctl) driver 3.04.20
[    6.745320] mptctl: Registered with Fusion MPT base driver
[    6.746349] mptctl: /dev/mptctl @ (major,minor=10,220)
[    6.760690] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    6.763568] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.764701] serio: i8042 AUX port at 0x60,0x64 irq 12
[    6.766227] mousedev: PS/2 mouse device common for all mice
[    6.768089] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    6.770269] evbug: Connected device: input0 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[    6.774303] mk712: device not present
[    6.776179] rtc_cmos 00:00: RTC can wake from S4
[    6.777609] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    6.778996] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[    6.780714] rtc_cmos 00:00: RTC can wake from S4
[    6.784084] evbug: Disconnected device: input0
[    6.786001] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    6.788098] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc1
[    6.788274] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[    6.789913] rtc-test rtc-test.0: rtc core: registered test as rtc2
[    6.793957] rtc-test rtc-test.0: rtc core: registered test as rtc2
[    6.794201] rtc-test rtc-test.1: rtc core: registered test as rtc3
[    6.794375] rtc-test rtc-test.1: rtc core: registered test as rtc3
[    6.794597] i2c /dev entries driver
[    6.795350] i2c-parport-light: adapter type unspecified
[    6.795936] pps pps0: new PPS source ktimer
[    6.795939] pps pps0: ktimer PPS source registered
[    6.795941] pps_ldisc: PPS line discipline registered
[    6.795990] Driver for 1-wire Dallas network protocol.
[    6.796127] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[    6.796218] w1_f0d_init()
[    6.801360] applesmc: supported laptop not found!
[    6.801362] applesmc: driver init failed (ret=-19)!
[    6.801704] f71882fg: Not a Fintek device
[    6.801747] f71882fg: Not a Fintek device
[    6.803196] pc87360: PC8736x not detected, module not inserted
[    6.803278] sch56xx_common: Unsupported device id: 0xff
[    6.803306] sch56xx_common: Unsupported device id: 0xff
[    6.807625] acquirewdt: WDT driver for Acquire single board computer initialising
[    6.807840] acquirewdt: I/O address 0x0043 already in use
[    6.807849] acquirewdt: probe of acquirewdt failed with error -5
[    6.807984] advantechwdt: WDT driver for Advantech single board computer initialising
[    6.808291] advantechwdt: initialized. timeout=60 sec (nowayout=1)
[    6.808332] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[    6.808335] alim7101_wdt: ALi M7101 PMU not present - WDT not set
[    6.808337] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    6.808559] ib700wdt: WDT driver for IB700 single board computer initialising
[    6.808753] ib700wdt: START method I/O 443 is not available
[    6.808762] ib700wdt: probe of ib700wdt failed with error -5
[    6.808874] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising
[    6.808880] wafer5823wdt: I/O address 0x0443 already in use
[    6.808923] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05
[    6.809137] i6300esb: cannot register miscdev on minor=130 (err=-16)
[    6.809169] i6300ESB timer: probe of 0000:00:04.0 failed with error -16
[    6.809199] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.809233] iTCO_vendor_support: vendor-support=0
[    6.809301] sc1200wdt: build 20020303
[    6.809333] sc1200wdt: io parameter must be specified
[    6.809360] nv_tco: NV TCO WatchDog Timer Driver v0.01
[    6.809579] sbc60xxwdt: I/O address 0x0443 already in use
[    6.809594] cpu5wdt: misc_register failed
[    6.809717] w83877f_wdt: I/O address 0x0443 already in use
[    6.809719] machzwd: MachZ ZF-Logic Watchdog driver initializing
[    6.809734] machzwd: no ZF-Logic found
[    6.810082] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16).
[    6.810084] watchdog: Software Watchdog: a legacy watchdog module is probably present.
[    6.810244] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
[    6.813428] Bluetooth: HCI UART driver ver 2.3
[    6.813430] Bluetooth: HCI UART protocol H4 registered
[    6.813432] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    6.813472] Bluetooth: HCI UART protocol Intel registered
[    6.813474] Bluetooth: HCI UART protocol QCA registered
[    6.821747] ledtrig-cpu: registered to indicate activity on CPUs
[    6.862390] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[    6.873578] iscsi: registered transport (iser)
[    6.874439] OPA Virtual Network Driver - v1.0
[    6.876745] fw_cfg: probe of QEMU0002:00 failed with error -16
[    6.896952] hidraw: raw HID events driver (C) Jiri Kosina
[    6.899327] NET: Registered protocol family 23
[    6.900285] IrCOMM protocol (Dag Brattli)
[    6.910220] FPGA DOWNLOAD --->
[    6.910826] FPGA image file name: xlinx_fpga_firmware.bit
[    6.912020] GPIO INIT FAIL!!
[    6.912690] mostcore: init()
[    6.913502] mostcore: registered new application interfacing module networking
[    6.915406] hdaps: supported laptop not found!
[    6.916250] hdaps: driver init failed (ret=-19)!
[    6.917294] fujitsu_laptop: driver 0.6.0 successfully loaded
[    6.918415] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI
[    6.921060] AMD(R) PCI-E Non-Transparent Bridge Driver 1.0
[    6.922139] IDT PCI-E Non-Transparent Bridge Driver 2.0
[    6.923249] Software Queue-Pair Transport over NTB, version 4
[    6.924997] pktgen: Packet Generator for packet performance testing. Version: 2.75
[    6.930071] drop_monitor: Initializing network drop monitor service
[    6.931360] NET: Registered protocol family 26
[    6.932215] GACT probability NOT on
[    6.933324] u32 classifier
[    6.933910]     Performance counters on
[    6.934634]     Actions configured
[    6.935436] gre: GRE over IPv4 demultiplexor driver
[    6.936352] ip_gre: GRE over IPv4 tunneling driver
[    6.938616] Initializing XFRM netlink socket
[    6.939634] NET: Registered protocol family 10
[    6.947510] Segment Routing with IPv6
[    6.948278] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    6.950478] ip6_gre: GRE over IPv6 tunneling driver
[    6.951939] NET: Registered protocol family 17
[    6.952820] NET: Registered protocol family 4
[    6.953740] NET: Registered protocol family 5
[    6.954709] Bluetooth: RFCOMM TTY layer initialized
[    6.955631] Bluetooth: RFCOMM socket layer initialized
[    6.956607] Bluetooth: RFCOMM ver 1.11
[    6.957381] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.958392] Bluetooth: BNEP socket layer initialized
[    6.959325] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    6.960477] BUG: using __this_cpu_add() in preemptible [00000000] code: krfcommd/178
[    6.960483] caller is __this_cpu_preempt_check+0x13/0x20
[    6.960485] CPU: 0 PID: 178 Comm: krfcommd Not tainted 4.14.0-rc7-02177-g3bc58b1 #1
[    6.960487] Call Trace:
[    6.960493]  dump_stack+0x65/0x92
[    6.960495]  check_preemption_disabled+0xf4/0x110
[    6.960497]  __this_cpu_preempt_check+0x13/0x20
[    6.960501]  sock_alloc+0x86/0xa0
[    6.960503]  __sock_create+0x99/0x1b0
[    6.960506]  ? _raw_spin_unlock_irqrestore+0x7f/0x90
[    6.960508]  sock_create_kern+0x14/0x20
[    6.960511]  rfcomm_l2sock_create+0x28/0x50
[    6.960514]  rfcomm_run+0x58/0x12a0
[    6.960517]  ? wait_woken+0x90/0x90
[    6.960520]  kthread+0x134/0x140
[    6.960522]  ? rfcomm_check_accept+0xa0/0xa0
[    6.960524]  ? __kthread_bind_mask+0x90/0x90
[    6.960526]  ret_from_fork+0x25/0x30
[    6.975298] Bluetooth: HIDP socket layer initialized
[    6.986709] RPC: Registered rdma transport module.
[    6.987631] RPC: Registered rdma backchannel transport module.
[    6.988865] NET: Registered protocol family 33
[    6.989705] Key type rxrpc registered
[    6.990451] Key type rxrpc_s registered
[    6.996746] NET: Registered protocol family 41
[    7.003443] l2tp_core: L2TP core driver, V2.0
[    7.004276] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    7.005348] l2tp_netlink: L2TP netlink interface
[    7.006262] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    7.007458] l2tp_debugfs: L2TP debugfs support
[    7.008297] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    7.009521] 8021q: 802.1Q VLAN Support v1.8
[    7.010453] sctp: Hash tables configured (bind 64/64)
[    7.011602] NET: Registered protocol family 43
[    7.012658] Key type dns_resolver registered
[    7.013544] Key type ceph registered
[    7.020091] libceph: loaded (mon/osd proto 15/24)
[    7.026824] batman_adv: B.A.T.M.A.N. advanced 2017.4 (compatibility version 15) loaded
[    7.028338] openvswitch: Open vSwitch switching datapath
[    7.029592] mpls_gso: MPLS GSO support
[    7.030507] start plist test
[    7.040725] end plist test
[    7.041253] mce: Unable to init MCE device (rc: -5)
[    7.042908] RAS: Correctable Errors collector initialized.
[    7.044011] ... APIC ID:      00000000 (0)
[    7.044794] ... APIC VERSION: 01050014
[    7.045526] 0000000000000000000000000000000000000000000000000000000000000000
[    7.046882] 0000000000000000000000000000000000000000000000000000000000000000
[    7.047273] 0000000000000000000000000000000000000000000000000000000000008000
[    7.049659] number of MP IRQ sources: 15.
[    7.050460] number of IO-APIC #0 registers: 24.
[    7.051318] testing the IO APIC.......................
[    7.052305] IO APIC #0......
[    7.052859] .... register #00: 00000000
[    7.053597] .......    : physical APIC id: 00
[    7.054417] .......    : Delivery Type: 0
[    7.055174] .......    : LTS          : 0
[    7.055934] .... register #01: 00170011
[    7.056651] .......     : max redirection entries: 17
[    7.057628] .......     : PRQ implemented: 0
[    7.058435] .......     : IO APIC version: 11
[    7.059253] .... register #02: 00000000
[    7.059975] .......     : arbitration: 00
[    7.060754] .... IRQ redirection table:
[    7.061480] IOAPIC 0:
[    7.061937]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.063418]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[    7.064893]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[    7.066350]  pin03, enabled , edge , high, V(33), IRR(0), S(0), logical , D(01), M(1)
[    7.067843]  pin04, enabled , edge , high, V(34), IRR(0), S(0), logical , D(01), M(1)
[    7.069320]  pin05, disabled, level, high, V(35), IRR(0), S(0), logical , D(01), M(1)
[    7.071827]  pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(01), M(1)
[    7.073289]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(01), M(1)
[    7.074796]  pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(01), M(1)
[    7.076257]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1)
[    7.077753]  pin0a, disabled, level, high, V(3A), IRR(0), S(0), logical , D(01), M(1)
[    7.079218]  pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(01), M(1)
[    7.080706]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[    7.082170]  pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(01), M(1)
[    7.083655]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(01), M(1)
[    7.085129]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(01), M(1)
[    7.086588]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.088091]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.089554]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.091041]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.092499]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.094002]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.095465]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.096954]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.098398] IRQ to pin mappings:
[    7.099012] IRQ0 -> 0:2
[    7.099483] IRQ1 -> 0:1
[    7.099961] IRQ3 -> 0:3
[    7.100477] IRQ4 -> 0:4
[    7.100959] IRQ5 -> 0:5
[    7.101431] IRQ6 -> 0:6
[    7.101910] IRQ7 -> 0:7
[    7.102383] IRQ8 -> 0:8
[    7.102863] IRQ9 -> 0:9
[    7.103356] IRQ10 -> 0:10
[    7.103867] IRQ11 -> 0:11
[    7.104378] IRQ12 -> 0:12
[    7.104888] IRQ13 -> 0:13
[    7.105393] IRQ14 -> 0:14
[    7.105905] IRQ15 -> 0:15
[    7.106410] .................................... done.
[    7.107403] sched_clock: Marking stable (7107375982, 0)->(7589301303, -481925321)
[    7.109556] zswap: loaded using pool lzo/zbud
[    7.110527] kAFS: Red Hat AFS client v0.1 registering.
[    7.138207] Btrfs loaded, crc32c=crc32c-generic, assert=on
[    7.139733] Key type encrypted registered
[    7.141471] cryptomgr_probe (188) used greatest stack depth: 14472 bytes left
[    7.142887] hctosys: unable to open rtc device (rtc0)
[    7.151115] OF: Duplicate name in testcase-data, renamed to "duplicate-name#1"
[    7.154748] ### dt-test ### start of unittest - you will see error messages
[    7.156364] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    7.158657] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    7.160956] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[    7.162309] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[    7.163696] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[    7.165183] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[    7.177169] OF: overlay: overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8
[    7.179062] OF: overlay: overlay #5 is not topmost
[    7.188984] i2c i2c-0: Added multiplexed i2c bus 1
[    7.191536] i2c i2c-0: Added multiplexed i2c bus 1
[    7.195469] i2c i2c-0: Added multiplexed i2c bus 2
[    7.197998] i2c i2c-0: Added multiplexed i2c bus 2
[    7.203283] ### dt-test ### FAIL of_unittest_overlay_high_level():2202 overlay_base_root not initialized
[    7.205092] ### dt-test ### end of unittest - 188 passed, 1 failed
[    7.206858] IP-Config: Failed to open ipddp0
[    7.207664] IP-Config: Failed to open gretap0
[    7.208487] IP-Config: Failed to open erspan0
[    7.209306] IP-Config: No network devices available
[    7.214156] Freeing unused kernel memory: 1348K
[    7.215048] Write protecting the kernel read-only data: 26624k
[    7.217582] Freeing unused kernel memory: 332K
[    7.222883] Freeing unused kernel memory: 1168K
[    7.223823] rodata_test: all tests were successful
[    7.228410] mount (191) used greatest stack depth: 14120 bytes left
[    7.242076] nfsroot (199) used greatest stack depth: 14024 bytes left
mkdir: can't create directory '/var/lock': No such file or directory
mkdir: can't create directory '/var/lock/lkp-bootstrap.lock': No such file or directory
sleep: invalid number '333.3'
[    7.264029] cat (208) used greatest stack depth: 13720 bytes left
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lkp/lkp/src/bin
/ # LKP: HOSTNAME vm-lkp-st01-yocto-ia32-10, MAC 00:00:00:00:00:00, kernel 4.14.0-rc7-02177-g3bc58b1 1, serial console /dev/ttyS0
[    7.478495] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    7.480539] evbug: Connected device: input3 (ImExPS/2 Generic Explorer Mouse at isa0060/serio1/input0)
[    7.500058] evbug: Disconnected device: input3
[    8.121739] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[    8.123722] evbug: Connected device: input4 (ImExPS/2 Generic Explorer Mouse at isa0060/serio1/input0)
[    8.293524] Kernel tests: Boot OK!
[    8.293524] LKP: waiting for network...

Elapsed time: 10

#!/bin/bash

# To reproduce,
# 1) save job-script and this script (both are attached in 0day report email)
# 2) run this script with your compiled kernel and optional env $INSTALL_MOD_PATH

kernel=$1

initrds=(
	/osimage/yocto/yocto-tiny-i386-2016-04-22.cgz
	/lkp/lkp/lkp-i386.cgz
	/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig.i386_2016-09-03.cgz
	/osimage/pkg/debian-x86_64-2016-08-31.cgz/trinity-static-i386-x86_64-6ddabfd2_2017-11-10.cgz
)

HTTP_PREFIX=https://github.com/0day-ci/lkp-qemu/raw/master
wget --timestamping "${initrds[@]/#/$HTTP_PREFIX}"

{
	cat "${initrds[@]//*\//}"
	[[ $INSTALL_MOD_PATH ]] && (
		cd "$INSTALL_MOD_PATH"
		find lib | cpio -o -H newc --quiet | gzip
	)
	echo  job-script | cpio -o -H newc --quiet | gzip
} > initrd.img

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-kernel $kernel
	-initrd initrd.img
	-m 420
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-serial stdio
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-st01-yocto-ia32-10::dhcp
	root=/dev/ram0
	user=lkp
	job=/job-script
	ARCH=x86_64
	kconfig=x86_64-randconfig-s4-11170105
	branch=linux-devel/devel-hourly-2017111620
	commit=3bc58b1a49b4179db035ca1da289abc0f25a4df2
	BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s4-11170105/gcc-6/3bc58b1a49b4179db035ca1da289abc0f25a4df2/vmlinuz-4.14.0-rc7-02177-g3bc58b1
	max_uptime=1500
	RESULT_ROOT=/result/trinity/300s/vm-lkp-st01-yocto-ia32/yocto-tiny-i386-2016-04-22.cgz/x86_64-randconfig-s4-11170105/gcc-6/3bc58b1a49b4179db035ca1da289abc0f25a4df2/0
	result_service=tmpfs
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	console=tty0
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
