Hello, I use a US Robotics fax modem, pnp. I set the jumpers on the modem itself, for com4 and irq7 (i think..I cant remember) and all is well in either Linux or Win95. > Is anyone out there using an internal plug-and-play > ISA modem successfully > with Linux? > > Thanks, > > Joe Patton > ----- Original Message ----- > From: Jason Cotterell <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, July 24, 1999 6:50 AM > Subject: Re: [newbie] Need Help Using isapnp, > pnpdump, and isapnp.conf to > configure my PNP internal modem > > > > in console, type "statserial" for each port > (cua0,cua1cua2cua3). > > these are com 123and 4 in windows. using modemtool > from consle will let > > you set a link from whatever cua you choose to > /dev/modem > > so you can select it in Kppp or what ever ppp > program you use > > also use setserial for changing the i/o port irq > and uart settings > > for instance: > > [root@/dev/modem]setserial cua1 > > [root@/dev/modem](irq:4, UART: 16550A, Port: > 0x03f8) > > now typing in "setserial irq 3" would set > /dev/modem to use irq3 > > > > > > _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com